examples/var_service: add /var/run flag file to ntp.script

2018-07-26T11:45:33+00:00

Signed-off-by: Denys Vlasenko

examples/var_service/: use standard logger script, viewer and pager scripts

2018-07-03T21:23:09+00:00

Signed-off-by: Denys Vlasenko

examples/var_service/: use "svc" for service commands, other tweaks

2018-07-03T15:02:50+00:00

Signed-off-by: Denys Vlasenko

examples: update /var/service/getty for Unicode ttys

2018-06-23T11:55:13+00:00

Signed-off-by: Denys Vlasenko

tweak /var/service example

2018-05-20T20:43:42+00:00

Signed-off-by: Denys Vlasenko

setlogcons: open /dev/ttyN for "setlogcons N", not /dev/tty1

2018-04-16T19:48:32+00:00

Signed-off-by: Denys Vlasenko

examples/var_service: new example: dnsmasq service

2018-03-30T18:49:16+00:00

Signed-off-by: Denys Vlasenko

svok: new applet (daemontools compat)

2018-03-30T18:02:33+00:00

function old new delta svok_main - 127 +127 packed_usage 32705 32757 +52 applet_names 2756 2761 +5 applet_main 1588 1592 +4 bb_banner 46 47 +1 sv 1286 1284 -2 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 4/1 up/down: 189/-2) Total: 187 bytes Signed-off-by: Denys Vlasenko

ifplugd service example: always run up/down script on startup

2018-03-30T09:14:46+00:00

Signed-off-by: Denys Vlasenko

udhcpd: fix "not dying on SIGTERM"

2018-03-10T18:34:39+00:00

Fixes: commit 52a515d18724bbb34e3ccbbb0218efcc4eccc0a8 "udhcp: use poll() instead of select()" Feb 16 2017 udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read. In the above commit, it was changed as follows: - if (!FD_ISSET(signal_pipe.rd, rfds)) + if (!pfds[0].revents) return 0; The problem is, the check was working for select() purely by accident. Caught signal interrupts select()/poll() syscalls, they return with EINTR (regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked. IOW: they can't see any changes to fd state caused by signal haldler (in our case, signal handler makes signal pipe ready to be read). For select(), it means that rfds[] bit array is unmodified, bit of signal pipe's read fd is still set, and the above check "works": it thinks select() says there is data to read. This accident does not work for poll(): .revents stays clear, and we do not try reading signal pipe as we should. In udhcpd, we fall through and block in socket read. Further SIGTERM signals simply cause socket read to be interrupted and then restarted (since SIGTERM handler has SA_RESTART=1). Fixing this as follows: remove the check altogether. Set signal pipe read fd to nonblocking mode. Always read it in udhcp_sp_read(). If read fails, assume it's EAGAIN and return 0 ("no signal seen"). udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR (using safe_poll()) - thus ensuring we have correct .revents for all fds - and calling udhcp_sp_read() only if pfds[0].revents!=0. udhcpc performs much fewer reads (typically it sleeps >99.999% of the time), there is no need to optimize it: can call udhcp_sp_read() after each poll unconditionally. To robustify socket reads, unconditionally set pfds[1].revents=0 in udhcp_sp_fd_set() (which is before poll), and check it before reading network socket in udhcpd. TODO: This might still fail: if pfds[1].revents=POLLIN, socket read may still block. There are rare cases when select/poll indicates that data can be read, but then actual read still blocks (one such case is UDP packets with wrong checksum). General advise is, if you use a poll/select loop, keep all your fds nonblocking. Maybe we should also do that to our network sockets? function old new delta udhcp_sp_setup 55 65 +10 udhcp_sp_fd_set 54 60 +6 udhcp_sp_read 46 36 -10 udhcpd_main 1451 1437 -14 udhcpc_main 2723 2708 -15 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39) Total: -23 bytes Signed-off-by: Denys Vlasenko

busybox-w32/examples/var_service, branch embed

examples/var_service: add /var/run flag file to ntp.script

examples/var_service/: use standard logger script, viewer and pager scripts

examples/var_service/: use "svc" for service commands, other tweaks

examples: update /var/service/getty for Unicode ttys

tweak /var/service example

setlogcons: open /dev/ttyN for "setlogcons N", not /dev/tty1

examples/var_service: new example: dnsmasq service

svok: new applet (daemontools compat)

ifplugd service example: always run up/down script on startup

udhcpd: fix "not dying on SIGTERM"