Merge branch 'busybox' into merge

1 files changed, 1 insertions, 914 deletions

diff --git a/networking/Config.src b/networking/Config.src
index eb0536a7c..527bdd15d 100644
--- a/networking/Config.src
+++ b/networking/Config.src
@@ -5,8 +5,6 @@
 
 menu "Networking Utilities"
 
-INSERT
-
 config FEATURE_IPV6
         bool "Enable IPv6 support"
         default y
@@ -48,891 +46,7 @@ config VERBOSE_RESOLUTION_ERRORS
           "can't resolve 'hostname.com'" and want to know more.
           This may increase size of your executable a bit.
 
-config ARP
-        bool "arp"
-        default y
-        select PLATFORM_LINUX
-        help
-          Manipulate the system ARP cache.
-
-config ARPING
-        bool "arping"
-        default y
-        select PLATFORM_LINUX
-        help
-          Ping hosts by ARP packets.
-
-config BRCTL
-        bool "brctl"
-        default y
-        select PLATFORM_LINUX
-        help
-          Manage ethernet bridges.
-          Supports addbr/delbr and addif/delif.
-
-config FEATURE_BRCTL_FANCY
-        bool "Fancy options"
-        default y
-        depends on BRCTL
-        help
-          Add support for extended option like:
-            setageing, setfd, sethello, setmaxage,
-            setpathcost, setportprio, setbridgeprio,
-            stp
-          This adds about 600 bytes.
-
-config FEATURE_BRCTL_SHOW
-        bool "Support show"
-        default y
-        depends on BRCTL && FEATURE_BRCTL_FANCY
-        help
-          Add support for option which prints the current config:
-            show
-
-config DNSD
-        bool "dnsd"
-        default y
-        help
-          Small and static DNS server daemon.
-
-config ETHER_WAKE
-        bool "ether-wake"
-        default y
-        select PLATFORM_LINUX
-        help
-          Send a magic packet to wake up sleeping machines.
-
-config FAKEIDENTD
-        bool "fakeidentd"
-        default y
-        select FEATURE_SYSLOG
-        help
-          fakeidentd listens on the ident port and returns a predefined
-          fake value on any query.
-
-config FTPD
-        bool "ftpd"
-        default y
-        help
-          simple FTP daemon. You have to run it via inetd.
-
-config FEATURE_FTP_WRITE
-        bool "Enable upload commands"
-        default y
-        depends on FTPD
-        help
-          Enable all kinds of FTP upload commands (-w option)
-
-config FEATURE_FTPD_ACCEPT_BROKEN_LIST
-        bool "Enable workaround for RFC-violating clients"
-        default y
-        depends on FTPD
-        help
-          Some ftp clients (among them KDE's Konqueror) issue illegal
-          "LIST -l" requests. This option works around such problems.
-          It might prevent you from listing files starting with "-" and
-          it increases the code size by ~40 bytes.
-          Most other ftp servers seem to behave similar to this.
-
-config FEATURE_FTP_AUTHENTICATION
-        bool "Enable authentication"
-        default y
-        depends on FTPD
-        help
-          Enable basic system login as seen in telnet etc.
-
-config FTPGET
-        bool "ftpget"
-        default y
-        help
-          Retrieve a remote file via FTP.
-
-config FTPPUT
-        bool "ftpput"
-        default y
-        help
-          Store a remote file via FTP.
-
-config FEATURE_FTPGETPUT_LONG_OPTIONS
-        bool "Enable long options in ftpget/ftpput"
-        default y
-        depends on LONG_OPTS && (FTPGET || FTPPUT)
-        help
-          Support long options for the ftpget/ftpput applet.
-
-config HOSTNAME
-        bool "hostname"
-        default y
-        help
-          Show or set the system's host name.
-
-config HTTPD
-        bool "httpd"
-        default y
-        help
-          Serve web pages via an HTTP server.
-
-config FEATURE_HTTPD_RANGES
-        bool "Support 'Ranges:' header"
-        default y
-        depends on HTTPD
-        help
-          Makes httpd emit "Accept-Ranges: bytes" header and understand
-          "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
-          downloads, seeking in multimedia players etc.
-
-config FEATURE_HTTPD_SETUID
-        bool "Enable -u <user> option"
-        default y
-        depends on HTTPD
-        help
-          This option allows the server to run as a specific user
-          rather than defaulting to the user that starts the server.
-          Use of this option requires special privileges to change to a
-          different user.
-
-config FEATURE_HTTPD_BASIC_AUTH
-        bool "Enable Basic http Authentication"
-        default y
-        depends on HTTPD
-        help
-          Utilizes password settings from /etc/httpd.conf for basic
-          authentication on a per url basis.
-          Example for httpd.conf file:
-          /adm:toor:PaSsWd
-
-config FEATURE_HTTPD_AUTH_MD5
-        bool "Support MD5 crypted passwords for http Authentication"
-        default y
-        depends on FEATURE_HTTPD_BASIC_AUTH
-        help
-          Enables encrypted passwords, and wildcard user/passwords
-          in httpd.conf file.
-          User '*' means 'any system user name is ok',
-          password of '*' means 'use system password for this user'
-          Examples:
-          /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
-          /adm:root:*
-          /wiki:*:*
-
-config FEATURE_HTTPD_CGI
-        bool "Support Common Gateway Interface (CGI)"
-        default y
-        depends on HTTPD
-        help
-          This option allows scripts and executables to be invoked
-          when specific URLs are requested.
-
-config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
-        bool "Support for running scripts through an interpreter"
-        default y
-        depends on FEATURE_HTTPD_CGI
-        help
-          This option enables support for running scripts through an
-          interpreter. Turn this on if you want PHP scripts to work
-          properly. You need to supply an additional line in your
-          httpd.conf file:
-          *.php:/path/to/your/php
-
-config FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
-        bool "Set REMOTE_PORT environment variable for CGI"
-        default y
-        depends on FEATURE_HTTPD_CGI
-        help
-          Use of this option can assist scripts in generating
-          references that contain a unique port number.
-
-config FEATURE_HTTPD_ENCODE_URL_STR
-        bool "Enable -e option (useful for CGIs written as shell scripts)"
-        default y
-        depends on HTTPD
-        help
-          This option allows html encoding of arbitrary strings for display
-          by the browser. Output goes to stdout.
-          For example, httpd -e "<Hello World>" produces
-          "&#60Hello&#32World&#62".
-
-config FEATURE_HTTPD_ERROR_PAGES
-        bool "Support for custom error pages"
-        default y
-        depends on HTTPD
-        help
-          This option allows you to define custom error pages in
-          the configuration file instead of the default HTTP status
-          error pages. For instance, if you add the line:
-                E404:/path/e404.html
-          in the config file, the server will respond the specified
-          '/path/e404.html' file instead of the terse '404 NOT FOUND'
-          message.
-
-config FEATURE_HTTPD_PROXY
-        bool "Support for reverse proxy"
-        default y
-        depends on HTTPD
-        help
-          This option allows you to define URLs that will be forwarded
-          to another HTTP server. To setup add the following line to the
-          configuration file
-                P:/url/:http://hostname[:port]/new/path/
-          Then a request to /url/myfile will be forwarded to
-          http://hostname[:port]/new/path/myfile.
-
-config FEATURE_HTTPD_GZIP
-        bool "Support for GZIP content encoding"
-        default y
-        depends on HTTPD
-        help
-          Makes httpd send files using GZIP content encoding if the
-          client supports it and a pre-compressed <file>.gz exists.
-
-config IFCONFIG
-        bool "ifconfig"
-        default y
-        select PLATFORM_LINUX
-        help
-          Ifconfig is used to configure the kernel-resident network interfaces.
-
-config FEATURE_IFCONFIG_STATUS
-        bool "Enable status reporting output (+7k)"
-        default y
-        depends on IFCONFIG
-        help
-          If ifconfig is called with no arguments it will display the status
-          of the currently active interfaces.
-
-config FEATURE_IFCONFIG_SLIP
-        bool "Enable slip-specific options \"keepalive\" and \"outfill\""
-        default y
-        depends on IFCONFIG
-        help
-          Allow "keepalive" and "outfill" support for SLIP. If you're not
-          planning on using serial lines, leave this unchecked.
-
-config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
-        bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
-        default y
-        depends on IFCONFIG
-        help
-          Allow the start address for shared memory, start address for I/O,
-          and/or the interrupt line used by the specified device.
-
-config FEATURE_IFCONFIG_HW
-        bool "Enable option \"hw\" (ether only)"
-        default y
-        depends on IFCONFIG
-        help
-          Set the hardware address of this interface, if the device driver
-          supports  this  operation. Currently, we only support the 'ether'
-          class.
-
-config FEATURE_IFCONFIG_BROADCAST_PLUS
-        bool "Set the broadcast automatically"
-        default y
-        depends on IFCONFIG
-        help
-          Setting this will make ifconfig attempt to find the broadcast
-          automatically if the value '+' is used.
-
-config IFENSLAVE
-        bool "ifenslave"
-        default y
-        select PLATFORM_LINUX
-        help
-          Userspace application to bind several interfaces
-          to a logical interface (use with kernel bonding driver).
-
-config IFPLUGD
-        bool "ifplugd"
-        default y
-        select PLATFORM_LINUX
-        help
-          Network interface plug detection daemon.
-
-config IFUPDOWN
-        bool "ifupdown"
-        default y
-        help
-          Activate or deactivate the specified interfaces. This applet makes
-          use of either "ifconfig" and "route" or the "ip" command to actually
-          configure network interfaces. Therefore, you will probably also want
-          to enable either IFCONFIG and ROUTE, or enable
-          FEATURE_IFUPDOWN_IP and the various IP options. Of
-          course you could use non-busybox versions of these programs, so
-          against my better judgement (since this will surely result in plenty
-          of support questions on the mailing list), I do not force you to
-          enable these additional options. It is up to you to supply either
-          "ifconfig", "route" and "run-parts" or the "ip" command, either
-          via busybox or via standalone utilities.
-
-config IFUPDOWN_IFSTATE_PATH
-        string "Absolute path to ifstate file"
-        default "/var/run/ifstate"
-        depends on IFUPDOWN
-        help
-          ifupdown keeps state information in a file called ifstate.
-          Typically it is located in /var/run/ifstate, however
-          some distributions tend to put it in other places
-          (debian, for example, uses /etc/network/run/ifstate).
-          This config option defines location of ifstate.
-
-config FEATURE_IFUPDOWN_IP
-        bool "Use ip applet"
-        default y
-        depends on IFUPDOWN
-        help
-          Use the iproute "ip" command to implement "ifup" and "ifdown", rather
-          than the default of using the older 'ifconfig' and 'route' utilities.
-
-config FEATURE_IFUPDOWN_IP_BUILTIN
-        bool "Use busybox ip applet"
-        default y
-        depends on FEATURE_IFUPDOWN_IP
-        select PLATFORM_LINUX
-        select IP
-        select FEATURE_IP_ADDRESS
-        select FEATURE_IP_LINK
-        select FEATURE_IP_ROUTE
-        help
-          Use the busybox iproute "ip" applet to implement "ifupdown".
-
-          If left disabled, you must install the full-blown iproute2
-          utility or the  "ifup" and "ifdown" applets will not work.
-
-config FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
-        bool "Use busybox ifconfig and route applets"
-        default n
-        depends on IFUPDOWN && !FEATURE_IFUPDOWN_IP
-        select IFCONFIG
-        select ROUTE
-        help
-          Use the busybox iproute "ifconfig" and "route" applets to
-          implement the "ifup" and "ifdown" utilities.
-
-          If left disabled, you must install the full-blown ifconfig
-          and route utilities, or the  "ifup" and "ifdown" applets will not
-          work.
-
-config FEATURE_IFUPDOWN_IPV4
-        bool "Support for IPv4"
-        default y
-        depends on IFUPDOWN
-        help
-          If you want ifup/ifdown to talk IPv4, leave this on.
-
-config FEATURE_IFUPDOWN_IPV6
-        bool "Support for IPv6"
-        default y
-        depends on IFUPDOWN && FEATURE_IPV6
-        help
-          If you need support for IPv6, turn this option on.
-
-### UNUSED
-###config FEATURE_IFUPDOWN_IPX
-###     bool "Support for IPX"
-###     default y
-###     depends on IFUPDOWN
-###     help
-###       If this option is selected you can use busybox to work with IPX
-###       networks.
-
-config FEATURE_IFUPDOWN_MAPPING
-        bool "Enable mapping support"
-        default y
-        depends on IFUPDOWN
-        help
-          This enables support for the "mapping" stanza, unless you have
-          a weird network setup you don't need it.
-
-config FEATURE_IFUPDOWN_EXTERNAL_DHCP
-        bool "Support for external dhcp clients"
-        default n
-        depends on IFUPDOWN
-        help
-          This enables support for the external dhcp clients. Clients are
-          tried in the following order: dhcpcd, dhclient, pump and udhcpc.
-          Otherwise, if udhcpc applet is enabled, it is used.
-          Otherwise, ifup/ifdown will have no support for DHCP.
-
-config INETD
-        bool "inetd"
-        default y
-        select FEATURE_SYSLOG
-        help
-          Internet superserver daemon
-
-config FEATURE_INETD_SUPPORT_BUILTIN_ECHO
-        bool "Support echo service"
-        default y
-        depends on INETD
-        help
-          Echo received data internal inetd service
-
-config FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
-        bool "Support discard service"
-        default y
-        depends on INETD
-        help
-          Internet /dev/null internal inetd service
-
-config FEATURE_INETD_SUPPORT_BUILTIN_TIME
-        bool "Support time service"
-        default y
-        depends on INETD
-        help
-          Return 32 bit time since 1900 internal inetd service
-
-config FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
-        bool "Support daytime service"
-        default y
-        depends on INETD
-        help
-          Return human-readable time internal inetd service
-
-config FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
-        bool "Support chargen service"
-        default y
-        depends on INETD
-        help
-          Familiar character generator internal inetd service
-
-config FEATURE_INETD_RPC
-        bool "Support RPC services"
-        default n  # very rarely used, and needs Sun RPC support in libc
-        depends on INETD
-        select FEATURE_HAVE_RPC
-        help
-          Support Sun-RPC based services
-
-config IP
-        bool "ip"
-        default y
-        select PLATFORM_LINUX
-        help
-          The "ip" applet is a TCP/IP interface configuration and routing
-          utility. You generally don't need "ip" to use busybox with
-          TCP/IP.
-
-config FEATURE_IP_ADDRESS
-        bool "ip address"
-        default y
-        depends on IP
-        help
-          Address manipulation support for the "ip" applet.
-
-config FEATURE_IP_LINK
-        bool "ip link"
-        default y
-        depends on IP
-        help
-          Configure network devices with "ip".
-
-config FEATURE_IP_ROUTE
-        bool "ip route"
-        default y
-        depends on IP
-        help
-          Add support for routing table management to "ip".
-
-config FEATURE_IP_ROUTE_DIR
-        string "ip route configuration directory"
-        default "/etc/iproute2"
-        depends on FEATURE_IP_ROUTE
-        help
-          Location of the "ip" applet routing configuration.
-
-config FEATURE_IP_TUNNEL
-        bool "ip tunnel"
-        default y
-        depends on IP
-        help
-          Add support for tunneling commands to "ip".
-
-config FEATURE_IP_RULE
-        bool "ip rule"
-        default y
-        depends on IP
-        help
-          Add support for rule commands to "ip".
-
-config FEATURE_IP_NEIGH
-        bool "ip neighbor"
-        default y
-        depends on IP
-        help
-          Add support for neighbor commands to "ip".
-
-config FEATURE_IP_SHORT_FORMS
-        bool "Support short forms of ip commands"
-        default y
-        depends on IP
-        help
-          Also support short-form of ip <OBJECT> commands:
-          ip addr   -> ipaddr
-          ip link   -> iplink
-          ip route  -> iproute
-          ip tunnel -> iptunnel
-          ip rule   -> iprule
-          ip neigh  -> ipneigh
-
-          Say N unless you desparately need the short form of the ip
-          object commands.
-
-config FEATURE_IP_RARE_PROTOCOLS
-        bool "Support displaying rarely used link types"
-        default n
-        depends on IP
-        help
-          If you are not going to use links of type "frad", "econet",
-          "bif" etc, you probably don't need to enable this.
-          Ethernet, wireless, infrared, ppp/slip, ip tunnelling
-          link types are supported without this option selected.
-
-config IPADDR
-        bool
-        default y
-        depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ADDRESS
-
-config IPLINK
-        bool
-        default y
-        depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_LINK
-
-config IPROUTE
-        bool
-        default y
-        depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ROUTE
-
-config IPTUNNEL
-        bool
-        default y
-        depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_TUNNEL
-
-config IPRULE
-        bool
-        default y
-        depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_RULE
-
-config IPNEIGH
-        bool
-        default y
-        depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_NEIGH
-
-config IPCALC
-        bool "ipcalc"
-        default y
-        help
-          ipcalc takes an IP address and netmask and calculates the
-          resulting broadcast, network, and host range.
-
-config FEATURE_IPCALC_FANCY
-        bool "Fancy IPCALC, more options, adds 1 kbyte"
-        default y
-        depends on IPCALC
-        help
-          Adds the options hostname, prefix and silent to the output of
-          "ipcalc".
-
-config FEATURE_IPCALC_LONG_OPTIONS
-        bool "Enable long options"
-        default y
-        depends on IPCALC && LONG_OPTS
-        help
-          Support long options for the ipcalc applet.
-
-config NETSTAT
-        bool "netstat"
-        default y
-        select PLATFORM_LINUX
-        help
-          netstat prints information about the Linux networking subsystem.
-
-config FEATURE_NETSTAT_WIDE
-        bool "Enable wide netstat output"
-        default y
-        depends on NETSTAT
-        help
-          Add support for wide columns. Useful when displaying IPv6 addresses
-          (-W option).
-
-config FEATURE_NETSTAT_PRG
-        bool "Enable PID/Program name output"
-        default y
-        depends on NETSTAT
-        help
-          Add support for -p flag to print out PID and program name.
-          +700 bytes of code.
-
-config NSLOOKUP
-        bool "nslookup"
-        default y
-        help
-          nslookup is a tool to query Internet name servers.
-
-config NTPD
-        bool "ntpd"
-        default y
-        select PLATFORM_LINUX
-        help
-          The NTP client/server daemon.
-
-config FEATURE_NTPD_SERVER
-        bool "Make ntpd usable as a NTP server"
-        default y
-        depends on NTPD
-        help
-          Make ntpd usable as a NTP server. If you disable this option
-          ntpd will be usable only as a NTP client.
-
-config FEATURE_NTPD_CONF
-        bool "Make ntpd understand /etc/ntp.conf"
-        default y
-        depends on NTPD
-        help
-          Make ntpd look in /etc/ntp.conf for peers. Only "server address"
-          is supported.
-
-config PSCAN
-        bool "pscan"
-        default y
-        help
-          Simple network port scanner.
-
-config ROUTE
-        bool "route"
-        default y
-        select PLATFORM_LINUX
-        help
-          Route displays or manipulates the kernel's IP routing tables.
-
-config SLATTACH
-        bool "slattach"
-        default y
-        select PLATFORM_LINUX
-        help
-          slattach is a small utility to attach network interfaces to serial
-          lines.
-
-#config TC
-#       bool "tc"
-#       default y
-#       help
-#         show / manipulate traffic control settings
-#
-#config FEATURE_TC_INGRESS
-#       def_bool n
-#       depends on TC
-
-config TCPSVD
-        bool "tcpsvd"
-        default y
-        help
-          tcpsvd listens on a TCP port and runs a program for each new
-          connection.
-
-config TELNET
-        bool "telnet"
-        default y
-        help
-          Telnet is an interface to the TELNET protocol, but is also commonly
-          used to test other simple protocols.
-
-config FEATURE_TELNET_TTYPE
-        bool "Pass TERM type to remote host"
-        default y
-        depends on TELNET
-        help
-          Setting this option will forward the TERM environment variable to the
-          remote host you are connecting to. This is useful to make sure that
-          things like ANSI colors and other control sequences behave.
-
-config FEATURE_TELNET_AUTOLOGIN
-        bool "Pass USER type to remote host"
-        default y
-        depends on TELNET
-        help
-          Setting this option will forward the USER environment variable to the
-          remote host you are connecting to. This is useful when you need to
-          log into a machine without telling the username (autologin). This
-          option enables `-a' and `-l USER' arguments.
-
-config TELNETD
-        bool "telnetd"
-        default y
-        select FEATURE_SYSLOG
-        help
-          A daemon for the TELNET protocol, allowing you to log onto the host
-          running the daemon. Please keep in mind that the TELNET protocol
-          sends passwords in plain text. If you can't afford the space for an
-          SSH daemon and you trust your network, you may say 'y' here. As a
-          more secure alternative, you should seriously consider installing the
-          very small Dropbear SSH daemon instead:
-                http://matt.ucc.asn.au/dropbear/dropbear.html
-
-          Note that for busybox telnetd to work you need several things:
-          First of all, your kernel needs:
-                  CONFIG_UNIX98_PTYS=y
-
-          Next, you need a /dev/pts directory on your root filesystem:
-
-                  $ ls -ld /dev/pts
-                  drwxr-xr-x  2 root root 0 Sep 23 13:21 /dev/pts/
-
-          Next you need the pseudo terminal master multiplexer /dev/ptmx:
-
-                  $ ls -la /dev/ptmx
-                  crw-rw-rw-  1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
-
-          Any /dev/ttyp[0-9]* files you may have can be removed.
-          Next, you need to mount the devpts filesystem on /dev/pts using:
-
-                  mount -t devpts devpts /dev/pts
-
-          You need to be sure that busybox has LOGIN and
-          FEATURE_SUID enabled. And finally, you should make
-          certain that Busybox has been installed setuid root:
-
-                chown root.root /bin/busybox
-                chmod 4755 /bin/busybox
-
-          with all that done, telnetd _should_ work....
-
-
-config FEATURE_TELNETD_STANDALONE
-        bool "Support standalone telnetd (not inetd only)"
-        default y
-        depends on TELNETD
-        help
-          Selecting this will make telnetd able to run standalone.
-
-config FEATURE_TELNETD_INETD_WAIT
-        bool "Support -w SEC option (inetd wait mode)"
-        default y
-        depends on FEATURE_TELNETD_STANDALONE
-        help
-          This option allows you to run telnetd in "inet wait" mode.
-          Example inetd.conf line (note "wait", not usual "nowait"):
-
-          telnet stream tcp wait root /bin/telnetd telnetd -w10
-
-          In this example, inetd passes _listening_ socket_ as fd 0
-          to telnetd when connection appears.
-          telnetd will wait for connections until all existing
-          connections are closed, and no new connections
-          appear during 10 seconds. Then it exits, and inetd continues
-          to listen for new connections.
-
-          This option is rarely used. "tcp nowait" is much more usual
-          way of running tcp services, including telnetd.
-          You most probably want to say N here.
-
-config TFTP
-        bool "tftp"
-        default y
-        help
-          This enables the Trivial File Transfer Protocol client program. TFTP
-          is usually used for simple, small transfers such as a root image
-          for a network-enabled bootloader.
-
-config TFTPD
-        bool "tftpd"
-        default y
-        help
-          This enables the Trivial File Transfer Protocol server program.
-          It expects that stdin is a datagram socket and a packet
-          is already pending on it. It will exit after one transfer.
-          In other words: it should be run from inetd in nowait mode,
-          or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
-
-comment "Common options for tftp/tftpd"
-        depends on TFTP || TFTPD
-
-config FEATURE_TFTP_GET
-        bool "Enable 'tftp get' and/or tftpd upload code"
-        default y
-        depends on TFTP || TFTPD
-        help
-          Add support for the GET command within the TFTP client. This allows
-          a client to retrieve a file from a TFTP server.
-          Also enable upload support in tftpd, if tftpd is selected.
-
-          Note: this option does _not_ make tftpd capable of download
-          (the usual operation people need from it)!
-
-config FEATURE_TFTP_PUT
-        bool "Enable 'tftp put' and/or tftpd download code"
-        default y
-        depends on TFTP || TFTPD
-        help
-          Add support for the PUT command within the TFTP client. This allows
-          a client to transfer a file to a TFTP server.
-          Also enable download support in tftpd, if tftpd is selected.
-
-config FEATURE_TFTP_BLOCKSIZE
-        bool "Enable 'blksize' and 'tsize' protocol options"
-        default y
-        depends on TFTP || TFTPD
-        help
-          Allow tftp to specify block size, and tftpd to understand
-          "blksize" and "tsize" options.
-
-config FEATURE_TFTP_PROGRESS_BAR
-        bool "Enable tftp progress meter"
-        default y
-        depends on TFTP && FEATURE_TFTP_BLOCKSIZE
-        help
-          Show progress bar.
-
-config TFTP_DEBUG
-        bool "Enable debug"
-        default n
-        depends on TFTP || TFTPD
-        help
-          Make tftp[d] print debugging messages on stderr.
-          This is useful if you are diagnosing a bug in tftp[d].
-
-config TRACEROUTE
-        bool "traceroute"
-        default y
-        select PLATFORM_LINUX
-        help
-          Utility to trace the route of IP packets.
-
-config TRACEROUTE6
-        bool "traceroute6"
-        default y
-        depends on FEATURE_IPV6 && TRACEROUTE
-        help
-          Utility to trace the route of IPv6 packets.
-
-config FEATURE_TRACEROUTE_VERBOSE
-        bool "Enable verbose output"
-        default y
-        depends on TRACEROUTE
-        help
-          Add some verbosity to traceroute. This includes among other things
-          hostnames and ICMP response types.
-
-config FEATURE_TRACEROUTE_USE_ICMP
-        bool "Enable -I option (use ICMP instead of UDP)"
-        default y
-        depends on TRACEROUTE
-        help
-          Add option -I to use ICMP ECHO instead of UDP datagrams.
-
-config TUNCTL
-        bool "tunctl"
-        default y
-        select PLATFORM_LINUX
-        help
-          tunctl creates or deletes tun devices.
-
-config FEATURE_TUNCTL_UG
-        bool "Support owner:group assignment"
-        default y
-        depends on TUNCTL
-        help
-          Allow to specify owner and group of newly created interface.
-          340 bytes of pure bloat. Say no here.
+INSERT
 
 source networking/udhcp/Config.in
 
@@ -945,31 +59,4 @@ config IFUPDOWN_UDHCPC_CMD_OPTIONS
           Intended to alter options not available in /etc/network/interfaces.
           (IE: --syslog --background etc...)
 
-config UDPSVD
-        bool "udpsvd"
-        default y
-        help
-          udpsvd listens on an UDP port and runs a program for each new
-          connection.
-
-config VCONFIG
-        bool "vconfig"
-        default y
-        select PLATFORM_LINUX
-        help
-          Creates, removes, and configures VLAN interfaces
-
-config ZCIP
-        bool "zcip"
-        default y
-        select PLATFORM_LINUX
-        select FEATURE_SYSLOG
-        help
-          ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
-          It's a daemon that allocates and defends a dynamically assigned
-          address on the 169.254/16 network, requiring no system administrator.
-
-          See http://www.zeroconf.org for further details, and "zcip.script"
-          in the busybox examples.
-
 endmenu