1 files changed, 133 insertions, 73 deletions

diff --git a/miscutils/microcom.c b/miscutils/microcom.c
index 1235f0634..160bff19b 100644
--- a/miscutils/microcom.c
+++ b/miscutils/microcom.c
@@ -9,128 +9,188 @@
  */
 #include "libbb.h"
 
+/* All known arches use small ints for signals */
+static volatile smallint signalled;
+
+static void signal_handler(int signo)
+{
+        signalled = signo;
+}
+
+// set canonical tty mode
+static void xget1(int fd, struct termios *t, struct termios *oldt)
+{ 
+        tcgetattr(fd, oldt);
+        *t = *oldt;
+        cfmakeraw(t);
+//      t->c_lflag &= ~(ISIG|ICANON|ECHO|IEXTEN);
+//      t->c_iflag &= ~(BRKINT|IXON|ICRNL);
+//      t->c_oflag &= ~(ONLCR);
+//      t->c_cc[VMIN]  = 1;
+//      t->c_cc[VTIME] = 0;
+}
+
+static int xset1(int fd, struct termios *tio, const char *device)
+{
+        int ret = tcsetattr(fd, TCSANOW, tio);
+
+        if (ret) {
+                bb_perror_msg("can't tcsetattr for %s", device);
+        }
+        return ret;
+}
+
 int microcom_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
 int microcom_main(int argc, char **argv)
 {
         struct pollfd pfd[2];
-#define sfd (pfd[1].fd)
-        char *device_lock_file = NULL;
-        const char *s;
+        int nfd;
+        //int sfd;
+#define sfd (pfd[0].fd)
+        char *device_lock_file;
         const char *opt_s = "9600";
-        unsigned speed;
-        int len;
-        int exitcode = 1;
+        speed_t speed;
+        const char *opt_t = "100"; // 0.1 sec timeout
+        unsigned timeout;
         struct termios tio0, tiosfd, tio;
+        bool istty;
 
-        getopt32(argv, "s:", &opt_s);
+        // fetch options
+        opt_complementary = "-1"; /* at least one arg should be there */
+        getopt32(argv, "s:t:", &opt_s, &opt_t);
         argc -= optind;
         argv += optind;
-        if (!argv[0])
-                bb_show_usage();
+
+        // check sanity
         speed = xatou(opt_s);
+        timeout = xatou(opt_t);
+        device_lock_file = (char *)bb_basename(argv[0]);
 
         // try to create lock file in /var/lock
-        s = bb_basename(argv[0]);
-        if (!s[0]) {
-                errno = ENODEV;
-                bb_perror_msg_and_die("can't lock device");
-        }
-        device_lock_file = xasprintf("/var/lock/LCK..%s", s);
+        device_lock_file = xasprintf("/var/lock/LCK..%s", device_lock_file);
         sfd = open(device_lock_file, O_CREAT | O_WRONLY | O_TRUNC | O_EXCL, 0644);
         if (sfd < 0) {
-                if (ENABLE_FEATURE_CLEAN_UP)
-                        free(device_lock_file);
-                device_lock_file = NULL;
                 if (errno == EEXIST)
                         bb_perror_msg_and_die("can't lock device");
                 // We don't abort on other errors: /var/lock can be
                 // non-writable or non-existent
+                if (ENABLE_FEATURE_CLEAN_UP)
+                        free(device_lock_file);
+                device_lock_file = NULL;
         } else {
                 // %4d to make mgetty happy. It treats 4-bytes lock files as binary,
                 // not text, PID. Making 5+ char file. Brrr...
-                s = xasprintf("%4d\n", getpid());
+                char *s = xasprintf("%4d\n", getpid());
                 write(sfd, s, strlen(s));
                 if (ENABLE_FEATURE_CLEAN_UP)
-                        free((char*)s);
+                        free(s);
                 close(sfd);
         }
 
-        // open device
-        sfd = open(argv[0], O_RDWR);
-        if (sfd < 0) {
-                bb_perror_msg("can't open device");
-                goto unlock_and_exit;
-        }
+        // setup signals
+        sig_catch(SIGHUP,  signal_handler);
+        sig_catch(SIGINT,  signal_handler);
+        sig_catch(SIGTERM, signal_handler);
+        sig_catch(SIGPIPE, signal_handler);
 
-        // put stdin to "raw mode", handle one character at a time
-        tcgetattr(STDIN_FILENO, &tio0);
-        tio = tio0;
-        tio.c_lflag &= ~(ICANON|ECHO);
-        tio.c_iflag &= ~(IXON|ICRNL);
-        tio.c_oflag &= ~(ONLCR);
-        tio.c_cc[VMIN] = 1;
-        tio.c_cc[VTIME] = 0;
-        if (tcsetattr(STDIN_FILENO, TCSANOW, &tio)) {
-                bb_perror_msg("can't tcsetattr for %s", "stdin");
-                goto unlock_and_exit;
-        }
+        // error exit code if we fail to open the device
+        signalled = 1;
 
-        /* same thing for modem (plus: set baud rate) - TODO: make CLI option */
-        tcgetattr(sfd, &tiosfd);
-        tio = tiosfd;
-        tio.c_lflag &= ~(ICANON|ECHO);
-        tio.c_iflag &= ~(IXON|ICRNL);
-        tio.c_oflag &= ~(ONLCR);
-        tio.c_cc[VMIN] = 1;
-        tio.c_cc[VTIME] = 0;
-        cfsetispeed(&tio, tty_value_to_baud(speed));
-        cfsetospeed(&tio, tty_value_to_baud(speed));
-        if (tcsetattr(sfd, TCSANOW, &tio)) {
-                bb_perror_msg("can't tcsetattr for %s", "device");
+        // open device
+        sfd = open_or_warn(argv[0], O_RDWR | O_NOCTTY | O_NONBLOCK);
+        if (sfd < 0)
                 goto unlock_and_exit;
-        }
+        fcntl(sfd, F_SETFL, O_RDWR | O_NOCTTY);
 
-        // disable SIGINT
-        signal(SIGINT, SIG_IGN);
+        /* put stdin to "raw mode" (if stdin is a TTY),
+                handle one character at a time */
+        istty = isatty(STDIN_FILENO);
+        if (istty) {
+                xget1(STDIN_FILENO, &tio, &tio0);
+                if (xset1(STDIN_FILENO, &tio, "stdin"))
+                        goto close_unlock_and_exit;
+//              tcflush(STDIN_FILENO, TCIFLUSH);
+                timeout = -1; // tty input? -> set infinite timeout for poll()
+        }
 
-        // drain stdin
-        tcflush(STDIN_FILENO, TCIFLUSH);
-        printf("connected to '%s' (%d bps), exit with ctrl-X...\r\n", argv[0], speed);
+        // same thing for modem
+        xget1(sfd, &tio, &tiosfd);
+        // order device to hang up at exit
+        tio.c_cflag |= (CREAD|HUPCL);
+        // set device speed
+        cfsetspeed(&tio, tty_value_to_baud(speed));
+        if (xset1(sfd, &tio, argv[0]))
+                goto restore0_close_unlock_and_exit;
 
         // main loop: check with poll(), then read/write bytes across
-        pfd[0].fd = STDIN_FILENO;
+        /* pfd[0].fd = sfd; - they are the same */
         pfd[0].events = POLLIN;
-        /*pfd[1].fd = sfd;*/
+        pfd[1].fd = STDIN_FILENO;
         pfd[1].events = POLLIN;
-        while (1) {
+
+        // TODO: on piped input should we treat NL as CRNL?!
+
+        signalled = 0;
+        // initially we have to poll() both stdin and device
+        nfd = 2;
+        while (!signalled && nfd && safe_poll(pfd, nfd, timeout) > 0) {
                 int i;
-                safe_poll(pfd, 2, -1);
-                for (i = 0; i < 2; ++i) {
-                        if (pfd[i].revents & POLLIN) {
-                                len = read(pfd[i].fd, bb_common_bufsiz1, COMMON_BUFSIZE);
-                                if (len > 0) {
-                                        if (!i && 24 == bb_common_bufsiz1[0])
-                                                goto done; // ^X exits
-                                        write(pfd[1-i].fd, bb_common_bufsiz1, len);
+
+                for (i = 0; i < nfd; ++i) {
+                        if (pfd[i].revents & (POLLIN | POLLHUP)) {
+//              int fd;
+                                char c;
+                                // read a byte
+                                if (safe_read(pfd[i].fd, &c, 1) < 1) {
+                                        // this can occur at the end of piped input
+                                        // from now we only poll() for device
+                                        nfd--;
+                                        continue;
+                                }
+//              fd = STDOUT_FILENO;
+                                // stdin requires additional processing
+                                // (TODO: must be controlled by command line switch)
+                                if (i) {
+                                        // ^@ sends Break
+                                        if (0 == c) {
+                                                tcsendbreak(sfd, 0);
+                                                continue;
+                                        }
+                                        // ^X exits
+                                        if (24 == c)
+                                                goto done;
+//              fd = sfd;
                                 }
+                                // write the byte
+                                write(i ? sfd : STDOUT_FILENO, &c, 1);
+//              write(fd, &c, 1);
+                                // give device a chance to get data
+                                // wait 0.01 msec
+                                // (TODO: seems to be arbitrary to me)
+                                if (i)
+                                        usleep(10);
                         }
                 }
         }
- done:
+done:
         tcsetattr(sfd, TCSANOW, &tiosfd);
-        tcsetattr(STDIN_FILENO, TCSANOW, &tio0);
-        tcflush(STDIN_FILENO, TCIFLUSH);
 
+restore0_close_unlock_and_exit:
+        if (istty) {
+//              tcflush(STDIN_FILENO, TCIFLUSH);
+                tcsetattr(STDIN_FILENO, TCSANOW, &tio0);
+        }
+
+close_unlock_and_exit:
         if (ENABLE_FEATURE_CLEAN_UP)
                 close(sfd);
-        exitcode = 0;
 
- unlock_and_exit:
+unlock_and_exit:
         // delete lock file
         if (device_lock_file) {
                 unlink(device_lock_file);
                 if (ENABLE_FEATURE_CLEAN_UP)
                         free(device_lock_file);
         }
-        return exitcode;
+        return signalled;
 }