summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
...
| * ash: fix build failure when command built-in is disabledRon Yorston2020-04-301-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 7eb8eecbb (ash: eval: Add assignment built-in support again) building BusyBox with the 'command' built-in disabled fails. parse_command_args() only needs to be called when the 'command' built-in is run. Which it won't be if it's disabled. v2: Avoiding infinite loops is good, too. Thanks, Harald van Dijk. Reported-by: Deweloper <deweloper@wp.pl> Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * httpd: permit non-default home directory with NOMMU enabledRon Yorston2020-04-301-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When BusyBox is compiled with NOMMU enabled running httpd with the '-h' option fails even if the specified directory exists: $ ls -d www www $ busybox httpd -fvvvp 8080 -h www ... ... try to access http://localhost:8080/www ... httpd: can't change directory to 'www': No such file or directory The parent process executes xchdir("www"). When a connection is accepted it's handled by re-executing httpd in inetd mode. The child process inherits the current directory "www" and tries to change directory again to "www", which fails. Omit the call to xchdir() when httpd is re-executed. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * grep: add proper support for pattern_listSören Tempel2020-04-302-6/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From POSIX.1-2008: The pattern_list's value shall consist of one or more patterns separated by <newline> characters; As such, given patterns need to be split at newline characters. Without doing so, busybox grep will interpret the newline as part of the pattern which is not in accordance with POSIX. See also: https://bugs.busybox.net/show_bug.cgi?id=12721 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * grep: Fix -f FILE when FILE is empty and -x providedGray Wolf2020-04-292-2/+9
| | | | | | | | | | | | | | | | | | | | Grep currently special-cased empty pattern file to be the same as pattern file with one empty line (empty pattern). That does mirror how GNU grep behaves, except when -x is provided. In that case .* pattern needs to be used instead. Signed-off-by: Gray Wolf <wolf@wolfsden.cz> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * xargs: restore correct behaviour of -n optionRon Yorston2020-04-292-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 1ff7002b1 (xargs: fix handling of quoted arguments, closes 11441) the -n option hasn't worked properly: $ echo 1 2 3 | xargs -n 1 echo 1 2 3 $ Because state is now remembered between calls to process_stdin() it's necessary to update the state before any premature return. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * build system: remove KBUILD_STR()Jean-Philippe Brucker2020-04-295-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using GNU Make >=4.3, the KBUILD_STR() definition interferes badly with dependency checks during build, and forces a complete rebuild every time Make runs. In if_changed_rule, Kconfig checks if the command used to build a file has changed since last execution. The previous command is stored in the generated .<file>.o.cmd file. For example applets/.applets.o.cmd defines a "cmd_applets/applets.o" variable: cmd_applets/applets.o := gcc ... -D"KBUILD_STR(s)=#s" ... Here the '#' should be escaped with a backslash, otherwise GNU Make interprets it as starting a comment, and ignore the rest of the variable. As a result of this truncation, the previous command doesn't equal the new command and Make rebuilds each target. The problem started to appear when GNU Make 4.3 (released January 2020), introduced a backward-incompatible fix to macros containing a '#'. While the above use of '#', a simple Make variable, still needs to be escaped, a '#' within a function invocation doesn't need to be escaped anymore. As Martin Dorey explained on the GNU Make discussion [1], the above declaration is generated from make-cmd, defined as: make-cmd = $(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1)))) Since GNU Make 4.3, the first argument of subst should not have a backslash. make-cmd now looks for literally \# and doesn't find it, and as a result doesn't add the backslash when generating .o.cmd files. [1] http://savannah.gnu.org/bugs/?20513 We could fix it by changing make-cmd to "$(subst #,\#,...)", but to avoid compatibility headaches, simply get rid of the KBUILD_STR definition, as done in Linux by b42841b7bb62 ("kbuild: Get rid of KBUILD_STR"). Quote the string arguments directly rather than asking the preprocessor to quote them. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * unzip: -d should create the dirLauri Kasanen2020-04-291-1/+7
| | | | | | | | | | | | | | The official Info-Zip unzip creates the dir if it doesn't exist. Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * shells: fix exitcode_trapN tests to avoid racesDenys Vlasenko2020-02-264-8/+4
| | | | | | | | Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
* | vi: enable regex search in default buildRon Yorston2020-05-282-4/+4
| |
* | Clarify build requirementsRon Yorston2020-05-271-1/+7
| |
* | Update README.mdRon Yorston2020-05-261-2/+2
| | | | | | | | MinGW is no longer supported in EPEL.
* | win32: changes to '#!' supportRon Yorston2020-05-242-12/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Since the earliest days of busybox-w32 '#!' has searched PATH for the interpreter. This doesn't seem to be supported by precedent. In testing I also found that additional code was needed for the case where PATH has been altered in the current shell or is modified on the command line: PATH has to be extracted from envp rather than getenv("PATH"). Drop this non-standard feature. *NIX implementations disagree on whether the interpreter can itself be a script. Follow Linux and allow this with a limit of four levels of nesting.
* | dd: fix handling of 'conv=notrunc seek=N'Ron Yorston2020-05-203-7/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e6680912a (dd: create a sparse file when seek=N is used) broke the use of 'conv=notrunc seek=N' to modify existing files. Rename seek_sparse() to make_sparse() and: - add an argument to specify the start of the sparse region; - call make_sparse() before ftruncate(); - call make_sparse() only if: * we can determine the size of the file; * the file is not open in append mode; * the file is being extended. This should fix GitHub issue #186.
* | ash: proper accounting for backspaces in the read builtinRon Yorston2020-05-141-0/+1
| | | | | | | | | | | | When the '-n' option of the 'read' builtin is used we need to account for backspaces: increase 'nchars' when backspace removes a character from the buffer.
* | inotifyd: WIN32 portRon Yorston2020-04-154-2/+213
| | | | | | | | | | | | | | | | | | | | | | | | Use ReadDirectoryChangesW to implement inotifyd for WIN32. There are limitations: - It's only possible to watch directories, not files. - The notification doesn't distinguish between different changes to file state. All changes other than creation, deletion and renaming are reported as 'c'.
* | winansi: more fine-grained control of ANSI emulationRon Yorston2020-04-131-2/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the meaning of the BB_SKIP_ANSI_EMULATION variable: - if it isn't set or if it has any value other than 1 or 2, use ANSI emulation; - if it's set to 1, always emit ANSI escape codes; - if it's set to 2, attempt to enable virtual terminal processing in the current console. If that works emit ANSI escape codes, if not revert to ANSI emulation. On all platforms I've tested (Windows 10, Windows 8.1, ReactOS 0.4.13, plus ConEmu) BB_SKIP_ANSI_EMULATION=2 does the right thing.
* | ash: reset ANSI emulation when BB_SKIP_ANSI_EMULATION changesRon Yorston2020-04-135-10/+22
| | | | | | | | | | Update the skip status on the first call to skip_ansi_emulation() and whenever the BB_SKIP_ANSI_EMULATION variable changes.
* | Fix POSIX buildFRP-3445-g10e14d5ebRon Yorston2020-04-112-2/+2
| |
* | httpd: allow use of MD5-encrypted passwordsRon Yorston2020-04-091-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Allow use of MD5-encrypted passwords in HTTP authentication. However: - Since it adds 4K to the size of the binary it isn't enabled by default. Unencrypted password are allowed in the default build. - The use of '*' wildcards for user/password in the configuration file isn't allowed. - Enabling this feature requires enabling 'Use internal crypt functions' (USE_BB_CRYPT) in the 'Login/Password Management Utilities' section.
* | httpd: prevent access to config file and authenticated URLsRon Yorston2020-04-081-0/+12
| | | | | | | | | | | | | | | | | | | | | | Filesystems on Microsoft Windows are usually case-insensitive. This allows clients to circumvent security by requesting URLs with changes in case that aren't anticipated by the server: http://example.com/Httpd.conf vs http://example.com/httpd.conf http://example.com/SeCuReDir vs http://example.com/SecureDir Use case-insensitive comparisons to avoid this.
* | httpd: don't change directory in inetd modeRon Yorston2020-04-073-11/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the WIN32 port inetd mode is used in the same way as in NOMMU to process each new connection. However, it shares a problem with NOMMU mode upstream: the child process changes directory unnecessarily. Thus, 'httpd -fvvvp 8080 -h www' fails with errors: httpd: can't change directory to 'www': No such file or directory Fix this in the WIN32 port by not changing directory in inetd mode. The behaviour of inetd mode is now quite unlike upstream so the option have been changed to '-I' and removed from the help message. Since the -e/-d options appear in the help message unconditionally FEATURE_HTTPD_ENCODE_URL_STR has been enabled.
* | time: WIN32 portRon Yorston2020-04-066-12/+106
| | | | | | | | | | | | | | | | Port the time applet to WIN32. This requires the implemntation of a replacement for wait3(2). Only elapsed, user and system times are supported, not the memory and i/o statistics reported by GNU time.
* | httpd: enable in default configurationsRon Yorston2020-04-053-13/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the httpd applet in WIN32 default configurations. Some additional features have also been enabled: 'Ranges:' header Basic HTTP authentication Custom error pages GZIP content encoding Common Gateway Interface (CGI) and related features are not enabled. Basic HTTP authentication requires bb_simplify_abs_path_inplace(). This function shouldn't be used for WIN32 paths. In this case it's processing a URL which is OK.
* | httpd: WIN32 portRon Yorston2020-04-051-2/+133
| | | | | | | | | | | | | | | | Use mingw_spawn_detach() to daemonize the server. Pass the open socket to the child process on the command line. Omit handling of SIGHUP and SIGALRM. Timeouts are handled using poll(2) instead of alarm(2).
* | win32: new functions: getpeername(2), mingw_spawn_detach()Ron Yorston2020-04-053-3/+30
| | | | | | | | | | | | | | Implement getpeername(2). Add mingw_spawn_detach() to allow the spawned process to detach from the console.
* | libbb: rearrange command line processingRon Yorston2020-04-051-13/+11
| | | | | | | | Process the '--busybox' flag before checking argv[0].
* | xargs: restore correct behaviour of -n optionRon Yorston2020-03-292-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 1ff7002b1 (xargs: fix handling of quoted arguments, closes 11441) the -n option hasn't worked properly: $ echo 1 2 3 | xargs -n 1 echo 1 2 3 $ Because state is now remembered between calls to process_stdin() it's necessary to update the state before any premature return.
* | win32: more improvements to 'c:file' pathsRon Yorston2020-03-292-3/+4
| | | | | | | | | | | | | | | | Tab-completion of 'c:file' paths was leaking memory and incorrectly included BusyBox applets and shell built-ins. Fix handling of 'c:file' paths used as arguments to spawn functions. Otherwise things like 'timeout 5 c:busybox sleep 99' don't work.
* | timeout: fix utter brokennessRon Yorston2020-03-291-0/+1
| | | | | | | | | | The merge from upstream (commit d89ced75b, 2018-09-10) completely broke timeout. Apply a belated fix.
* | dd: create a sparse file when seek=N is usedRon Yorston2020-03-243-0/+21
| | | | | | | | | | | | | | When the seek=N argument is used mark the file as sparse and set the range that is sparse. See https://stackoverflow.com/questions/4011508/how-to-create-a-sparse-file-on-ntfs
* | win32: stat(2): return correct st_blocks for compressed/sparse filesRon Yorston2020-03-241-1/+13
| | | | | | | | | | | | Use GetCompressedFileSize to obtain the actual number of blocks for compressed or sparse files. Use this to return a more accurate value for st_blocks.
* | win32: improve handling of 'c:file' paths for executablesRon Yorston2020-03-182-3/+11
| | | | | | | | | | | | | | | | bb_basename() didn't properly handle paths of the form 'c:file'. Attempting to run 'c:busybox' resulted in 'c:busybox: applet not found'. The shell had a similar problem: trying to run 'c:busybox' reported 'sh: c:busybox: not found'.
* | Merge branch 'busybox' into mergeRon Yorston2020-02-251-207/+183
|\|
| * ash: expand: Fix multiple issues with EXP_DISCARD in evalvarDenys Vlasenko2020-02-241-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upstream commit: Date: Wed, 12 Sep 2018 14:27:16 +0800 expand: Fix multiple issues with EXP_DISCARD in evalvar The commit 3cd538634f71538370f5af239f342aec48b7470b broke parameter expansion in multiple ways because the EXP_DISCARD flag wasn't set or tested for various cases: $ src/dash -c 'var=; echo ${var:+nonempty}' nonempty $ src/dash -u -c 'unset foo bar; echo ${foo+${bar}}' dash: 1: bar: parameter not set $ src/dash -c 'foo=bar; echo ${foo=BUG}; echo $foo' barBUG bar $ This patch fixes them by introducing a new discard variable that tracks whether the extra word should be discarded or not when it is parsed. Reported-by: Martijn Dekker <martijn@inlv.org> Fixes: 3cd538634f71 ("expand: Do not reprocess data when...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Martijn Dekker <martijn@inlv.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * ash: expand: Do not reprocess data when expanding wordsDenys Vlasenko2020-02-241-178/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upstream patch: Date: Wed, 30 May 2018 02:06:03 +0800 expand: Do not reprocess data when expanding words Currently various paths will reprocess data when performing word expansion. For example, expari will skip backwards looking for the start of the arithmetic expansion, while evalvar will skip unexpanded words manually. This is cumbersome and error-prone. This patch fixes this by making word expansions proceed in a linear fashion. This means changing argstr and the various expansion functions such as expari and subevalvar to return the next character to be expanded. This is inspired by similar code from FreeBSD. However, we take things one step further and completely remove the manual word skipping in evalvar. This is accomplished by introducing a new EXP_DISCARD flag that tells argstr to only parse and not produce any actual expansions. Incidentally, argstr will now always NUL-terminate the expansion unless the EXP_WORD flag is set. This is because all but one caller of argstr wants the result to be NUL-termianted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Also includes two one-line follow-up fixes: expand: Eat closing brace for length parameter if (subtype == VSLENGTH) { + p++; if (flag & EXP_DISCARD) expand: Fix double-decrement in argstr - newloc = expdest - (char *)stackblock() - end; + newloc = q - (char *)stackblock() - end; and changes in code for bash substring extensions. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * ash: move TRACE statement in evalcommand()Ron Yorston2020-02-241-1/+2
| | | | | | | | | | | | | | | | Following recent work on evalcommand() a TRACE statement to report the status of a forked command was left in the wrong place. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * ash: rename some function parameters to match dashDenys Vlasenko2020-02-241-29/+29
| | | | | | | | Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * ash: rename stack_nputstr() back to stnputs() to match dashDenys Vlasenko2020-02-241-3/+3
| | | | | | | | Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
* | Merge branch 'busybox' into mergeRon Yorston2020-02-258-59/+101
|\|
| * ash: Expand here-documents in the current shell environmentDenys Vlasenko2020-02-223-13/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upstream commit: Date: Sun, 11 Nov 2007 15:27:00 +0800 Expand here-documents in the current shell environment Previously we always expanded here-documents in a subshell. This is contrary to the POSIX specification and how other shells behave. What's more this slows down many expansions due to the extra fork (however, it must be said that it is possible for it speed up certain expansions by running it simultaneously with the command on two CPUs). This patch move the expansion into the current shell environment. Test case: unset a cat <<- EOF > /dev/null ${a=NOT} EOF echo ${a}BAD Old result: BAD New result: NOTBAD Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * ash: parser: Do not push token back before parseheredocDenys Vlasenko2020-02-221-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upstream commit: Date: Mon, 19 Nov 2018 18:43:58 +0800 parser: Do not push token back before parseheredoc When we read the first token in list() we use peektoken instead of readtoken as the following code needs to use the same token again. However, this is wrong when we're in a here-document as it will clobber the saved token without resetting the tokpushback flag. This patch fixes it by doing the tokpushback after parseheredoc and setting lasttoken again if parseheredoc was called. Reported-by: Ron Yorston <rmy@frippery.org> Fixes: 7c245aa8ed33 ("[PARSER] Simplify EOF/newline handling in...") Fixes: ee5cbe9fd6bc ("[SHELL] Optimize dash -c "command" to avoid a fork") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Simon Ser <contact@emersion.fr> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * ash: parser: Fix old-style command substitution here-document crashDenys Vlasenko2020-02-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upstream commit: Date: Fri, 29 Mar 2019 13:49:59 +0800 parser: Fix old-style command substitution here-document crash ... This is caused by the recent change to save/restore here-docment list around command substitutions. In doing so we must finish existing here-documents prior to restoring the old here-document list. This is done for new-style command substitutions but not for old-style. This patch fixes it by doing it for both. Fixes: 51e2d88d6e51 ("parser: Save/restore here-documents in...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * hush: fix negative_arith.tests: glob-protect dash in "$((arith))"Denys Vlasenko2020-02-211-5/+19
| | | | | | | | | | | | | | | | | | | | function old new delta expand_vars_to_list 1026 1082 +56 parse_dollar 810 811 +1 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 57/0) Total: 57 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * ash: expand: Ensure result is escaped in cvtnumDenys Vlasenko2020-02-215-25/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upstream commit: Date: Fri, 1 Jun 2018 18:25:29 +0800 expand: Ensure result is escaped in cvtnum The minus sign generated from arithmetic expansion is currently unquoted which causes anomalies when the result is used in where the quoting matters. This patch fixes it by explicitly calling memtodest on the result in cvtnum. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * ash: memalloc: Avoid looping in growstacktoDenys Vlasenko2020-02-211-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upstream commit: Date: Thu, 31 May 2018 01:51:48 +0800 memalloc: Avoid looping in growstackto Currently growstackto will repeatedly call growstackblock until the requisite size is obtained. This is wasteful. This patch changes growstackblock to take a minimum size instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
* | Merge branch 'busybox' into mergeRon Yorston2020-02-2118-77/+226
|\|
| * hush: make "exit" in trap use pre-trap exitcode - fix for nested trapDenys Vlasenko2020-02-215-1/+29
| | | | | | | | | | | | | | function old new delta check_and_run_traps 276 278 +2 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * hush: make "exit" in trap use pre-trap exitcodeDenys Vlasenko2020-02-211-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | function old new delta check_and_run_traps 259 276 +17 builtin_exit 42 53 +11 hush_main 1086 1096 +10 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/0 up/down: 38/0) Total: 38 bytes Fixes exitcode_trap2.tests. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * ash: eval: Only restore exit status on exit/returnDenys Vlasenko2020-02-201-48/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upstream commit: Date: Fri, 14 Dec 2018 13:52:02 +0800 eval: Only restore exit status on exit/return We unconditionally restore the saved status in exitreset, which is incorrect as we only want to do it for exitcmd and returncmd. This patch fixes the problem by introducing EXEND. Reported-by: Martijn Dekker <martijn@inlv.org> Fixes: da30b4b78769 ("[BUILTIN] Exit without arguments in a trap...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
| * ash: Return without arguments in a trap should use status outside trapsDenys Vlasenko2020-02-201-5/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes exitcode_trap4.tests. Upstream commit: Date: Mon, 6 Oct 2014 21:51:26 +0800 Return without arguments in a trap should use status outside traps POSIX now requires that return without arguments in a trap should return the last command status prior to executing traps. This patch implements this behaviour. Incidentally this also changes the behaviour of return without arguments in a loop conditional to use the last exit status in the body as opposed to the last command in the conditional when there is one. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.2.3-55-g6feb (git 2.39.1) at 2025-03-28 21:39:38 +0000