quoth the readme:

NOTE: Don't expect any of these programs to work with current
OpenSSL releases, or even with later SSLeay releases.
ok miod

1 files changed, 0 insertions, 215 deletions

diff --git a/src/lib/libssl/src/demos/tunala/tunala.h b/src/lib/libssl/src/demos/tunala/tunala.h
deleted file mode 100644
index 3a752f259a..0000000000
--- a/src/lib/libssl/src/demos/tunala/tunala.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/* Tunala ("Tunneler with a New Zealand accent")
- *
- * Written by Geoff Thorpe, but endorsed/supported by noone. Please use this is
- * if it's useful or informative to you, but it's only here as a scratchpad for
- * ideas about how you might (or might not) program with OpenSSL. If you deploy
- * this is in a mission-critical environment, and have not read, understood,
- * audited, and modified this code to your satisfaction, and the result is that
- * all hell breaks loose and you are looking for a new employer, then it proves
- * nothing except perhaps that Darwinism is alive and well. Let's just say, *I*
- * don't use this in a mission-critical environment, so it would be stupid for
- * anyone to assume that it is solid and/or tested enough when even its author
- * doesn't place that much trust in it. You have been warned.
- *
- * With thanks to Cryptographic Appliances, Inc.
- */
-
-#ifndef _TUNALA_H
-#define _TUNALA_H
-
-/* pull in autoconf fluff */
-#ifndef NO_CONFIG_H
-#include "config.h"
-#else
-/* We don't have autoconf, we have to set all of these unless a tweaked Makefile
- * tells us not to ... */
-/* headers */
-#ifndef NO_HAVE_SELECT
-#define HAVE_SELECT
-#endif
-#ifndef NO_HAVE_SOCKET
-#define HAVE_SOCKET
-#endif
-#ifndef NO_HAVE_UNISTD_H
-#define HAVE_UNISTD_H
-#endif
-#ifndef NO_HAVE_FCNTL_H
-#define HAVE_FCNTL_H
-#endif
-#ifndef NO_HAVE_LIMITS_H
-#define HAVE_LIMITS_H
-#endif
-/* features */
-#ifndef NO_HAVE_STRSTR
-#define HAVE_STRSTR
-#endif
-#ifndef NO_HAVE_STRTOUL
-#define HAVE_STRTOUL
-#endif
-#endif
-
-#if !defined(HAVE_SELECT) || !defined(HAVE_SOCKET)
-#error "can't build without some network basics like select() and socket()"
-#endif
-
-#include <stdlib.h>
-#ifndef NO_SYSTEM_H
-#include <string.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifdef HAVE_FCNTL_H
-#include <fcntl.h>
-#endif
-#ifdef HAVE_LIMITS_H
-#include <limits.h>
-#endif
-#include <netdb.h>
-#include <signal.h>
-#include <sys/socket.h>
-#include <sys/types.h>
-#include <netinet/in.h>
-#endif /* !defined(NO_SYSTEM_H) */
-
-#ifndef NO_OPENSSL
-#include <openssl/err.h>
-#include <openssl/engine.h>
-#include <openssl/ssl.h>
-#endif /* !defined(NO_OPENSSL) */
-
-#ifndef OPENSSL_NO_BUFFER
-/* This is the generic "buffer" type that is used when feeding the
- * state-machine. It's basically a FIFO with respect to the "adddata" &
- * "takedata" type functions that operate on it. */
-#define MAX_DATA_SIZE 16384
-typedef struct _buffer_t {
-        unsigned char data[MAX_DATA_SIZE];
-        unsigned int used;
-        /* Statistical values - counts the total number of bytes read in and
-         * read out (respectively) since "buffer_init()" */
-        unsigned long total_in, total_out;
-} buffer_t;
-
-/* Initialise a buffer structure before use */
-void buffer_init(buffer_t *buf);
-/* Cleanup a buffer structure - presently not needed, but if buffer_t is
- * converted to using dynamic allocation, this would be required - so should be
- * called to protect against an explosion of memory leaks later if the change is
- * made. */
-void buffer_close(buffer_t *buf);
-
-/* Basic functions to manipulate buffers */
-
-unsigned int buffer_used(buffer_t *buf); /* How much data in the buffer */
-unsigned int buffer_unused(buffer_t *buf); /* How much space in the buffer */
-int buffer_full(buffer_t *buf); /* Boolean, is it full? */
-int buffer_notfull(buffer_t *buf); /* Boolean, is it not full? */
-int buffer_empty(buffer_t *buf); /* Boolean, is it empty? */
-int buffer_notempty(buffer_t *buf); /* Boolean, is it not empty? */
-unsigned long buffer_total_in(buffer_t *buf); /* Total bytes written to buffer */
-unsigned long buffer_total_out(buffer_t *buf); /* Total bytes read from buffer */
-
-#if 0 /* Currently used only within buffer.c - better to expose only
-       * higher-level functions anyway */
-/* Add data to the tail of the buffer, returns the amount that was actually
- * added (so, you need to check if return value is less than size) */
-unsigned int buffer_adddata(buffer_t *buf, const unsigned char *ptr,
-                unsigned int size);
-
-/* Take data from the front of the buffer (and scroll the rest forward). If
- * "ptr" is NULL, this just removes data off the front of the buffer. Return
- * value is the amount actually removed (can be less than size if the buffer has
- * too little data). */
-unsigned int buffer_takedata(buffer_t *buf, unsigned char *ptr,
-                unsigned int size);
-
-/* Flushes as much data as possible out of the "from" buffer into the "to"
- * buffer. Return value is the amount moved. The amount moved can be restricted
- * to a maximum by specifying "cap" - setting it to -1 means no limit. */
-unsigned int buffer_tobuffer(buffer_t *to, buffer_t *from, int cap);
-#endif
-
-#ifndef NO_IP
-/* Read or write between a file-descriptor and a buffer */
-int buffer_from_fd(buffer_t *buf, int fd);
-int buffer_to_fd(buffer_t *buf, int fd);
-#endif /* !defined(NO_IP) */
-
-#ifndef NO_OPENSSL
-/* Read or write between an SSL or BIO and a buffer */
-void buffer_from_SSL(buffer_t *buf, SSL *ssl);
-void buffer_to_SSL(buffer_t *buf, SSL *ssl);
-void buffer_from_BIO(buffer_t *buf, BIO *bio);
-void buffer_to_BIO(buffer_t *buf, BIO *bio);
-
-/* Callbacks */
-void cb_ssl_info(const SSL *s, int where, int ret);
-void cb_ssl_info_set_output(FILE *fp); /* Called if output should be sent too */
-int cb_ssl_verify(int ok, X509_STORE_CTX *ctx);
-void cb_ssl_verify_set_output(FILE *fp);
-void cb_ssl_verify_set_depth(unsigned int verify_depth);
-void cb_ssl_verify_set_level(unsigned int level);
-RSA *cb_generate_tmp_rsa(SSL *s, int is_export, int keylength);
-#endif /* !defined(NO_OPENSSL) */
-#endif /* !defined(OPENSSL_NO_BUFFER) */
-
-#ifndef NO_TUNALA
-#ifdef OPENSSL_NO_BUFFER
-#error "TUNALA section of tunala.h requires BUFFER support"
-#endif
-typedef struct _state_machine_t {
-        SSL *ssl;
-        BIO *bio_intossl;
-        BIO *bio_fromssl;
-        buffer_t clean_in, clean_out;
-        buffer_t dirty_in, dirty_out;
-} state_machine_t;
-typedef enum {
-        SM_CLEAN_IN, SM_CLEAN_OUT,
-        SM_DIRTY_IN, SM_DIRTY_OUT
-} sm_buffer_t;
-void state_machine_init(state_machine_t *machine);
-void state_machine_close(state_machine_t *machine);
-buffer_t *state_machine_get_buffer(state_machine_t *machine, sm_buffer_t type);
-SSL *state_machine_get_SSL(state_machine_t *machine);
-int state_machine_set_SSL(state_machine_t *machine, SSL *ssl, int is_server);
-/* Performs the data-IO loop and returns zero if the machine should close */
-int state_machine_churn(state_machine_t *machine);
-/* Is used to handle closing conditions - namely when one side of the tunnel has
- * closed but the other should finish flushing. */
-int state_machine_close_clean(state_machine_t *machine);
-int state_machine_close_dirty(state_machine_t *machine);
-#endif /* !defined(NO_TUNALA) */
-
-#ifndef NO_IP
-/* Initialise anything related to the networking. This includes blocking pesky
- * SIGPIPE signals. */
-int ip_initialise(void);
-/* ip is the 4-byte ip address (eg. 127.0.0.1 is {0x7F,0x00,0x00,0x01}), port is
- * the port to listen on (host byte order), and the return value is the
- * file-descriptor or -1 on error. */
-int ip_create_listener_split(const char *ip, unsigned short port);
-/* Same semantics as above. */
-int ip_create_connection_split(const char *ip, unsigned short port);
-/* Converts a string into the ip/port before calling the above */
-int ip_create_listener(const char *address);
-int ip_create_connection(const char *address);
-/* Just does a string conversion on its own. NB: If accept_all_ip is non-zero,
- * then the address string could be just a port. Ie. it's suitable for a
- * listening address but not a connecting address. */
-int ip_parse_address(const char *address, const char **parsed_ip,
-                unsigned short *port, int accept_all_ip);
-/* Accepts an incoming connection through the listener. Assumes selects and
- * what-not have deemed it an appropriate thing to do. */
-int ip_accept_connection(int listen_fd);
-#endif /* !defined(NO_IP) */
-
-/* These functions wrap up things that can be portability hassles. */
-int int_strtoul(const char *str, unsigned long *val);
-#ifdef HAVE_STRSTR
-#define int_strstr strstr
-#else
-char *int_strstr(const char *haystack, const char *needle);
-#endif
-
-#endif /* !defined(_TUNALA_H) */