diff options
Diffstat (limited to '')
| -rw-r--r-- | src/lib/libcrypto/arch/powerpc64/Makefile.inc | 46 | ||||
| -rw-r--r-- | src/lib/libcrypto/arch/powerpc64/opensslconf.h | 149 |
2 files changed, 1 insertions, 194 deletions
diff --git a/src/lib/libcrypto/arch/powerpc64/Makefile.inc b/src/lib/libcrypto/arch/powerpc64/Makefile.inc index cc42f67c5c..7afecde44d 100644 --- a/src/lib/libcrypto/arch/powerpc64/Makefile.inc +++ b/src/lib/libcrypto/arch/powerpc64/Makefile.inc | |||
| @@ -1,48 +1,4 @@ | |||
| 1 | # $OpenBSD: Makefile.inc,v 1.1 2020/06/25 04:29:08 drahn Exp $ | 1 | # $OpenBSD: Makefile.inc,v 1.2 2020/06/26 00:39:59 drahn Exp $ |
| 2 | |||
| 3 | # powerpc-specific libcrypto build rules | ||
| 4 | |||
| 5 | # aes | ||
| 6 | SRCS+= aes_core.c aes_cbc.c | ||
| 7 | # slower than C code | ||
| 8 | #CFLAGS+= -DAES_ASM | ||
| 9 | #SSLASM+= aes aes-ppc aes-ppc | ||
| 10 | # bf | ||
| 11 | SRCS+= bf_enc.c | ||
| 12 | # bn | ||
| 13 | SSLASM+= bn ppc bn-ppc | ||
| 14 | #SSLASM+= bn ppc-mont ppc-mont # bn_mul_mont_int | ||
| 15 | SSLASM+= bn ppc64-mont ppc64-mont # bn_mul_mont_fpu64 | ||
| 16 | CFLAGS+= -DOPENSSL_BN_ASM_MONT | ||
| 17 | # camellia | ||
| 18 | SRCS+= camellia.c cmll_cbc.c cmll_misc.c | ||
| 19 | # des | ||
| 20 | SRCS+= des_enc.c fcrypt_b.c | ||
| 21 | # rc4 | ||
| 22 | SRCS+= rc4_enc.c rc4_skey.c | ||
| 23 | # sha | ||
| 24 | CFLAGS+= -DSHA1_ASM | ||
| 25 | SSLASM+= sha sha1-ppc sha1-ppc | ||
| 26 | CFLAGS+= -DSHA256_ASM | ||
| 27 | SSLASM+= sha sha512-ppc sha256-ppc | ||
| 28 | # whrlpool | ||
| 29 | SRCS+= wp_block.c | ||
| 30 | |||
| 31 | .for dir src dst in ${SSLASM} | ||
| 32 | SRCS+= ${dst}.S | ||
| 33 | GENERATED+=${dst}.S | ||
| 34 | ${dst}.S: ${LCRYPTO_SRC}/${dir}/asm/${src}.pl | ||
| 35 | /usr/bin/perl \ | ||
| 36 | ${LCRYPTO_SRC}/${dir}/asm/${src}.pl linux32 ${.TARGET} > ${.TARGET} | ||
| 37 | .endfor | ||
| 38 | |||
| 39 | #CFLAGS+= -DOPENSSL_CPUID_OBJ # it's commented out in ppccap.c | ||
| 40 | SRCS+= ppccpuid.S ppccap.c | ||
| 41 | GENERATED+=ppccpuid.S | ||
| 42 | ppccpuid.S: ${LCRYPTO_SRC}/ppccpuid.pl | ||
| 43 | /usr/bin/perl \ | ||
| 44 | ${LCRYPTO_SRC}/ppccpuid.pl linux32 > ${.TARGET} | ||
| 45 | # $OpenBSD: Makefile.inc,v 1.1 2020/06/25 04:29:08 drahn Exp $ | ||
| 46 | 2 | ||
| 47 | # powerpc-specific libcrypto build rules | 3 | # powerpc-specific libcrypto build rules |
| 48 | 4 | ||
diff --git a/src/lib/libcrypto/arch/powerpc64/opensslconf.h b/src/lib/libcrypto/arch/powerpc64/opensslconf.h index 6fc15643a4..f8cbb5d652 100644 --- a/src/lib/libcrypto/arch/powerpc64/opensslconf.h +++ b/src/lib/libcrypto/arch/powerpc64/opensslconf.h | |||
| @@ -147,152 +147,3 @@ YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! | |||
| 147 | 147 | ||
| 148 | #endif /* DES_DEFAULT_OPTIONS */ | 148 | #endif /* DES_DEFAULT_OPTIONS */ |
| 149 | #endif /* HEADER_DES_LOCL_H */ | 149 | #endif /* HEADER_DES_LOCL_H */ |
| 150 | #include <openssl/opensslfeatures.h> | ||
| 151 | /* crypto/opensslconf.h.in */ | ||
| 152 | |||
| 153 | #if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) | ||
| 154 | #define OPENSSLDIR "/etc/ssl" | ||
| 155 | #endif | ||
| 156 | |||
| 157 | #undef OPENSSL_UNISTD | ||
| 158 | #define OPENSSL_UNISTD <unistd.h> | ||
| 159 | |||
| 160 | #undef OPENSSL_EXPORT_VAR_AS_FUNCTION | ||
| 161 | |||
| 162 | #if defined(HEADER_IDEA_H) && !defined(IDEA_INT) | ||
| 163 | #define IDEA_INT unsigned int | ||
| 164 | #endif | ||
| 165 | |||
| 166 | #if defined(HEADER_MD2_H) && !defined(MD2_INT) | ||
| 167 | #define MD2_INT unsigned int | ||
| 168 | #endif | ||
| 169 | |||
| 170 | #if defined(HEADER_RC2_H) && !defined(RC2_INT) | ||
| 171 | /* I need to put in a mod for the alpha - eay */ | ||
| 172 | #define RC2_INT unsigned int | ||
| 173 | #endif | ||
| 174 | |||
| 175 | #if defined(HEADER_RC4_H) | ||
| 176 | #if !defined(RC4_INT) | ||
| 177 | /* using int types make the structure larger but make the code faster | ||
| 178 | * on most boxes I have tested - up to %20 faster. */ | ||
| 179 | /* | ||
| 180 | * I don't know what does "most" mean, but declaring "int" is a must on: | ||
| 181 | * - Intel P6 because partial register stalls are very expensive; | ||
| 182 | * - elder Alpha because it lacks byte load/store instructions; | ||
| 183 | */ | ||
| 184 | #define RC4_INT unsigned int | ||
| 185 | #endif | ||
| 186 | #if !defined(RC4_CHUNK) | ||
| 187 | /* | ||
| 188 | * This enables code handling data aligned at natural CPU word | ||
| 189 | * boundary. See crypto/rc4/rc4_enc.c for further details. | ||
| 190 | */ | ||
| 191 | #define RC4_CHUNK unsigned long | ||
| 192 | #endif | ||
| 193 | #endif | ||
| 194 | |||
| 195 | #if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) | ||
| 196 | /* If this is set to 'unsigned int' on a DEC Alpha, this gives about a | ||
| 197 | * %20 speed up (longs are 8 bytes, int's are 4). */ | ||
| 198 | #ifndef DES_LONG | ||
| 199 | #define DES_LONG unsigned int | ||
| 200 | #endif | ||
| 201 | #endif | ||
| 202 | |||
| 203 | #if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) | ||
| 204 | #define CONFIG_HEADER_BN_H | ||
| 205 | #undef BN_LLONG | ||
| 206 | |||
| 207 | /* Should we define BN_DIV2W here? */ | ||
| 208 | |||
| 209 | /* Only one for the following should be defined */ | ||
| 210 | #define SIXTY_FOUR_BIT_LONG | ||
| 211 | #undef SIXTY_FOUR_BIT | ||
| 212 | #undef THIRTY_TWO_BIT | ||
| 213 | #endif | ||
| 214 | |||
| 215 | #if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) | ||
| 216 | #define CONFIG_HEADER_RC4_LOCL_H | ||
| 217 | /* if this is defined data[i] is used instead of *data, this is a %20 | ||
| 218 | * speedup on x86 */ | ||
| 219 | #undef RC4_INDEX | ||
| 220 | #endif | ||
| 221 | |||
| 222 | #if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) | ||
| 223 | #define CONFIG_HEADER_BF_LOCL_H | ||
| 224 | #undef BF_PTR | ||
| 225 | #endif /* HEADER_BF_LOCL_H */ | ||
| 226 | |||
| 227 | #if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) | ||
| 228 | #define CONFIG_HEADER_DES_LOCL_H | ||
| 229 | #ifndef DES_DEFAULT_OPTIONS | ||
| 230 | /* the following is tweaked from a config script, that is why it is a | ||
| 231 | * protected undef/define */ | ||
| 232 | #ifndef DES_PTR | ||
| 233 | #undef DES_PTR | ||
| 234 | #endif | ||
| 235 | |||
| 236 | /* This helps C compiler generate the correct code for multiple functional | ||
| 237 | * units. It reduces register dependancies at the expense of 2 more | ||
| 238 | * registers */ | ||
| 239 | #ifndef DES_RISC1 | ||
| 240 | #undef DES_RISC1 | ||
| 241 | #endif | ||
| 242 | |||
| 243 | #ifndef DES_RISC2 | ||
| 244 | #undef DES_RISC2 | ||
| 245 | #endif | ||
| 246 | |||
| 247 | #if defined(DES_RISC1) && defined(DES_RISC2) | ||
| 248 | YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! | ||
| 249 | #endif | ||
| 250 | |||
| 251 | /* Unroll the inner loop, this sometimes helps, sometimes hinders. | ||
| 252 | * Very mucy CPU dependant */ | ||
| 253 | #ifndef DES_UNROLL | ||
| 254 | #define DES_UNROLL | ||
| 255 | #endif | ||
| 256 | |||
| 257 | /* These default values were supplied by | ||
| 258 | * Peter Gutman <pgut001@cs.auckland.ac.nz> | ||
| 259 | * They are only used if nothing else has been defined */ | ||
| 260 | #if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) | ||
| 261 | /* Special defines which change the way the code is built depending on the | ||
| 262 | CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find | ||
| 263 | even newer MIPS CPU's, but at the moment one size fits all for | ||
| 264 | optimization options. Older Sparc's work better with only UNROLL, but | ||
| 265 | there's no way to tell at compile time what it is you're running on */ | ||
| 266 | |||
| 267 | #if defined( sun ) /* Newer Sparc's */ | ||
| 268 | # define DES_PTR | ||
| 269 | # define DES_RISC1 | ||
| 270 | # define DES_UNROLL | ||
| 271 | #elif defined( __ultrix ) /* Older MIPS */ | ||
| 272 | # define DES_PTR | ||
| 273 | # define DES_RISC2 | ||
| 274 | # define DES_UNROLL | ||
| 275 | #elif defined( __osf1__ ) /* Alpha */ | ||
| 276 | # define DES_PTR | ||
| 277 | # define DES_RISC2 | ||
| 278 | #elif defined ( _AIX ) /* RS6000 */ | ||
| 279 | /* Unknown */ | ||
| 280 | #elif defined( __hpux ) /* HP-PA */ | ||
| 281 | /* Unknown */ | ||
| 282 | #elif defined( __aux ) /* 68K */ | ||
| 283 | /* Unknown */ | ||
| 284 | #elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ | ||
| 285 | # define DES_UNROLL | ||
| 286 | #elif defined( __sgi ) /* Newer MIPS */ | ||
| 287 | # define DES_PTR | ||
| 288 | # define DES_RISC2 | ||
| 289 | # define DES_UNROLL | ||
| 290 | #elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ | ||
| 291 | # define DES_PTR | ||
| 292 | # define DES_RISC1 | ||
| 293 | # define DES_UNROLL | ||
| 294 | #endif /* Systems-specific speed defines */ | ||
| 295 | #endif | ||
| 296 | |||
| 297 | #endif /* DES_DEFAULT_OPTIONS */ | ||
| 298 | #endif /* HEADER_DES_LOCL_H */ | ||
