diff options
Diffstat (limited to 'src/lib/libssl/crypto/arch/sparc')
-rw-r--r-- | src/lib/libssl/crypto/arch/sparc/opensslconf.h | 238 |
1 files changed, 238 insertions, 0 deletions
diff --git a/src/lib/libssl/crypto/arch/sparc/opensslconf.h b/src/lib/libssl/crypto/arch/sparc/opensslconf.h new file mode 100644 index 0000000000..fb0979fce3 --- /dev/null +++ b/src/lib/libssl/crypto/arch/sparc/opensslconf.h | |||
@@ -0,0 +1,238 @@ | |||
1 | /* opensslconf.h */ | ||
2 | /* WARNING: Generated automatically from opensslconf.h.in by Configure. */ | ||
3 | |||
4 | /* OpenSSL was configured with the following options: */ | ||
5 | #ifndef OPENSSL_DOING_MAKEDEPEND | ||
6 | |||
7 | #ifndef OPENSSL_NO_CAMELLIA | ||
8 | # define OPENSSL_NO_CAMELLIA | ||
9 | #endif | ||
10 | #ifndef OPENSSL_NO_CAPIENG | ||
11 | # define OPENSSL_NO_CAPIENG | ||
12 | #endif | ||
13 | #ifndef OPENSSL_NO_CMS | ||
14 | # define OPENSSL_NO_CMS | ||
15 | #endif | ||
16 | #ifndef OPENSSL_NO_GMP | ||
17 | # define OPENSSL_NO_GMP | ||
18 | #endif | ||
19 | #ifndef OPENSSL_NO_JPAKE | ||
20 | # define OPENSSL_NO_JPAKE | ||
21 | #endif | ||
22 | #ifndef OPENSSL_NO_KRB5 | ||
23 | # define OPENSSL_NO_KRB5 | ||
24 | #endif | ||
25 | #ifndef OPENSSL_NO_MDC2 | ||
26 | # define OPENSSL_NO_MDC2 | ||
27 | #endif | ||
28 | #ifndef OPENSSL_NO_RC5 | ||
29 | # define OPENSSL_NO_RC5 | ||
30 | #endif | ||
31 | #ifndef OPENSSL_NO_RFC3779 | ||
32 | # define OPENSSL_NO_RFC3779 | ||
33 | #endif | ||
34 | #ifndef OPENSSL_NO_SEED | ||
35 | # define OPENSSL_NO_SEED | ||
36 | #endif | ||
37 | |||
38 | #endif /* OPENSSL_DOING_MAKEDEPEND */ | ||
39 | #ifndef OPENSSL_THREADS | ||
40 | # define OPENSSL_THREADS | ||
41 | #endif | ||
42 | #ifndef OPENSSL_NO_DYNAMIC_ENGINE | ||
43 | # define OPENSSL_NO_DYNAMIC_ENGINE | ||
44 | #endif | ||
45 | |||
46 | /* The OPENSSL_NO_* macros are also defined as NO_* if the application | ||
47 | asks for it. This is a transient feature that is provided for those | ||
48 | who haven't had the time to do the appropriate changes in their | ||
49 | applications. */ | ||
50 | #ifdef OPENSSL_ALGORITHM_DEFINES | ||
51 | # if defined(OPENSSL_NO_CAMELLIA) && !defined(NO_CAMELLIA) | ||
52 | # define NO_CAMELLIA | ||
53 | # endif | ||
54 | # if defined(OPENSSL_NO_CMS) && !defined(NO_CMS) | ||
55 | # define NO_CMS | ||
56 | # endif | ||
57 | # if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) | ||
58 | # define NO_GMP | ||
59 | # endif | ||
60 | # if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) | ||
61 | # define NO_KRB5 | ||
62 | # endif | ||
63 | # if defined(OPENSSL_NO_MDC2) && !defined(NO_MDC2) | ||
64 | # define NO_MDC2 | ||
65 | # endif | ||
66 | # if defined(OPENSSL_NO_RC5) && !defined(NO_RC5) | ||
67 | # define NO_RC5 | ||
68 | # endif | ||
69 | # if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779) | ||
70 | # define NO_RFC3779 | ||
71 | # endif | ||
72 | # if defined(OPENSSL_NO_SEED) && !defined(NO_SEED) | ||
73 | # define NO_SEED | ||
74 | # endif | ||
75 | # if defined(OPENSSL_NO_TLSEXT) && !defined(NO_TLSEXT) | ||
76 | # define NO_TLSEXT | ||
77 | # endif | ||
78 | #endif | ||
79 | |||
80 | /* crypto/opensslconf.h.in */ | ||
81 | |||
82 | /* Generate 80386 code? */ | ||
83 | #undef I386_ONLY | ||
84 | |||
85 | #if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ | ||
86 | #if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) | ||
87 | #define ENGINESDIR "/usr/lib/engines" | ||
88 | #define OPENSSLDIR "/etc/ssl" | ||
89 | #endif | ||
90 | #endif | ||
91 | |||
92 | #undef OPENSSL_UNISTD | ||
93 | #define OPENSSL_UNISTD <unistd.h> | ||
94 | |||
95 | #undef OPENSSL_EXPORT_VAR_AS_FUNCTION | ||
96 | |||
97 | #if defined(HEADER_IDEA_H) && !defined(IDEA_INT) | ||
98 | #define IDEA_INT unsigned int | ||
99 | #endif | ||
100 | |||
101 | #if defined(HEADER_MD2_H) && !defined(MD2_INT) | ||
102 | #define MD2_INT unsigned int | ||
103 | #endif | ||
104 | |||
105 | #if defined(HEADER_RC2_H) && !defined(RC2_INT) | ||
106 | /* I need to put in a mod for the alpha - eay */ | ||
107 | #define RC2_INT unsigned int | ||
108 | #endif | ||
109 | |||
110 | #if defined(HEADER_RC4_H) | ||
111 | #if !defined(RC4_INT) | ||
112 | /* using int types make the structure larger but make the code faster | ||
113 | * on most boxes I have tested - up to %20 faster. */ | ||
114 | /* | ||
115 | * I don't know what does "most" mean, but declaring "int" is a must on: | ||
116 | * - Intel P6 because partial register stalls are very expensive; | ||
117 | * - elder Alpha because it lacks byte load/store instructions; | ||
118 | */ | ||
119 | #define RC4_INT unsigned int | ||
120 | #endif | ||
121 | #if !defined(RC4_CHUNK) | ||
122 | /* | ||
123 | * This enables code handling data aligned at natural CPU word | ||
124 | * boundary. See crypto/rc4/rc4_enc.c for further details. | ||
125 | */ | ||
126 | #undef RC4_CHUNK | ||
127 | #endif | ||
128 | #endif | ||
129 | |||
130 | #if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) | ||
131 | /* If this is set to 'unsigned int' on a DEC Alpha, this gives about a | ||
132 | * %20 speed up (longs are 8 bytes, int's are 4). */ | ||
133 | #ifndef DES_LONG | ||
134 | #define DES_LONG unsigned int | ||
135 | #endif | ||
136 | #endif | ||
137 | |||
138 | #if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) | ||
139 | #define CONFIG_HEADER_BN_H | ||
140 | #define BN_LLONG | ||
141 | |||
142 | /* Should we define BN_DIV2W here? */ | ||
143 | |||
144 | /* Only one for the following should be defined */ | ||
145 | /* The prime number generation stuff may not work when | ||
146 | * EIGHT_BIT but I don't care since I've only used this mode | ||
147 | * for debuging the bignum libraries */ | ||
148 | #undef SIXTY_FOUR_BIT_LONG | ||
149 | #undef SIXTY_FOUR_BIT | ||
150 | #define THIRTY_TWO_BIT | ||
151 | #undef SIXTEEN_BIT | ||
152 | #undef EIGHT_BIT | ||
153 | #endif | ||
154 | |||
155 | #if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) | ||
156 | #define CONFIG_HEADER_RC4_LOCL_H | ||
157 | /* if this is defined data[i] is used instead of *data, this is a %20 | ||
158 | * speedup on x86 */ | ||
159 | #define RC4_INDEX | ||
160 | #endif | ||
161 | |||
162 | #if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) | ||
163 | #define CONFIG_HEADER_BF_LOCL_H | ||
164 | #undef BF_PTR | ||
165 | #endif /* HEADER_BF_LOCL_H */ | ||
166 | |||
167 | #if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) | ||
168 | #define CONFIG_HEADER_DES_LOCL_H | ||
169 | #ifndef DES_DEFAULT_OPTIONS | ||
170 | /* the following is tweaked from a config script, that is why it is a | ||
171 | * protected undef/define */ | ||
172 | #ifndef DES_PTR | ||
173 | #undef DES_PTR | ||
174 | #endif | ||
175 | |||
176 | /* This helps C compiler generate the correct code for multiple functional | ||
177 | * units. It reduces register dependancies at the expense of 2 more | ||
178 | * registers */ | ||
179 | #ifndef DES_RISC1 | ||
180 | #undef DES_RISC1 | ||
181 | #endif | ||
182 | |||
183 | #ifndef DES_RISC2 | ||
184 | #undef DES_RISC2 | ||
185 | #endif | ||
186 | |||
187 | #if defined(DES_RISC1) && defined(DES_RISC2) | ||
188 | YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! | ||
189 | #endif | ||
190 | |||
191 | /* Unroll the inner loop, this sometimes helps, sometimes hinders. | ||
192 | * Very mucy CPU dependant */ | ||
193 | #ifndef DES_UNROLL | ||
194 | #define DES_UNROLL | ||
195 | #endif | ||
196 | |||
197 | /* These default values were supplied by | ||
198 | * Peter Gutman <pgut001@cs.auckland.ac.nz> | ||
199 | * They are only used if nothing else has been defined */ | ||
200 | #if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) | ||
201 | /* Special defines which change the way the code is built depending on the | ||
202 | CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find | ||
203 | even newer MIPS CPU's, but at the moment one size fits all for | ||
204 | optimization options. Older Sparc's work better with only UNROLL, but | ||
205 | there's no way to tell at compile time what it is you're running on */ | ||
206 | |||
207 | #if defined( sun ) /* Newer Sparc's */ | ||
208 | # define DES_PTR | ||
209 | # define DES_RISC1 | ||
210 | # define DES_UNROLL | ||
211 | #elif defined( __ultrix ) /* Older MIPS */ | ||
212 | # define DES_PTR | ||
213 | # define DES_RISC2 | ||
214 | # define DES_UNROLL | ||
215 | #elif defined( __osf1__ ) /* Alpha */ | ||
216 | # define DES_PTR | ||
217 | # define DES_RISC2 | ||
218 | #elif defined ( _AIX ) /* RS6000 */ | ||
219 | /* Unknown */ | ||
220 | #elif defined( __hpux ) /* HP-PA */ | ||
221 | /* Unknown */ | ||
222 | #elif defined( __aux ) /* 68K */ | ||
223 | /* Unknown */ | ||
224 | #elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ | ||
225 | # define DES_UNROLL | ||
226 | #elif defined( __sgi ) /* Newer MIPS */ | ||
227 | # define DES_PTR | ||
228 | # define DES_RISC2 | ||
229 | # define DES_UNROLL | ||
230 | #elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ | ||
231 | # define DES_PTR | ||
232 | # define DES_RISC1 | ||
233 | # define DES_UNROLL | ||
234 | #endif /* Systems-specific speed defines */ | ||
235 | #endif | ||
236 | |||
237 | #endif /* DES_DEFAULT_OPTIONS */ | ||
238 | #endif /* HEADER_DES_LOCL_H */ | ||