'21.07'21.07

1 files changed, 236 insertions, 0 deletions

diff --git a/C/LzmaDec.h b/C/LzmaDec.h
new file mode 100644
index 0000000..6f12962
--- /dev/null
+++ b/C/LzmaDec.h
@@ -0,0 +1,236 @@
+/* LzmaDec.h -- LZMA Decoder
+2020-03-19 : Igor Pavlov : Public domain */
+
+#ifndef __LZMA_DEC_H
+#define __LZMA_DEC_H
+
+#include "7zTypes.h"
+
+EXTERN_C_BEGIN
+
+/* #define _LZMA_PROB32 */
+/* _LZMA_PROB32 can increase the speed on some CPUs,
+   but memory usage for CLzmaDec::probs will be doubled in that case */
+
+typedef
+#ifdef _LZMA_PROB32
+  UInt32
+#else
+  UInt16
+#endif
+  CLzmaProb;
+
+
+/* ---------- LZMA Properties ---------- */
+
+#define LZMA_PROPS_SIZE 5
+
+typedef struct _CLzmaProps
+{
+  Byte lc;
+  Byte lp;
+  Byte pb;
+  Byte _pad_;
+  UInt32 dicSize;
+} CLzmaProps;
+
+/* LzmaProps_Decode - decodes properties
+Returns:
+  SZ_OK
+  SZ_ERROR_UNSUPPORTED - Unsupported properties
+*/
+
+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
+
+
+/* ---------- LZMA Decoder state ---------- */
+
+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
+   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
+
+#define LZMA_REQUIRED_INPUT_MAX 20
+
+typedef struct
+{
+  /* Don't change this structure. ASM code can use it. */
+  CLzmaProps prop;
+  CLzmaProb *probs;
+  CLzmaProb *probs_1664;
+  Byte *dic;
+  SizeT dicBufSize;
+  SizeT dicPos;
+  const Byte *buf;
+  UInt32 range;
+  UInt32 code;
+  UInt32 processedPos;
+  UInt32 checkDicSize;
+  UInt32 reps[4];
+  UInt32 state;
+  UInt32 remainLen;
+
+  UInt32 numProbs;
+  unsigned tempBufSize;
+  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
+} CLzmaDec;
+
+#define LzmaDec_Construct(p) { (p)->dic = NULL; (p)->probs = NULL; }
+
+void LzmaDec_Init(CLzmaDec *p);
+
+/* There are two types of LZMA streams:
+     - Stream with end mark. That end mark adds about 6 bytes to compressed size.
+     - Stream without end mark. You must know exact uncompressed size to decompress such stream. */
+
+typedef enum
+{
+  LZMA_FINISH_ANY,   /* finish at any point */
+  LZMA_FINISH_END    /* block must be finished at the end */
+} ELzmaFinishMode;
+
+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
+
+   You must use LZMA_FINISH_END, when you know that current output buffer
+   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
+
+   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
+   and output value of destLen will be less than output buffer size limit.
+   You can check status result also.
+
+   You can use multiple checks to test data integrity after full decompression:
+     1) Check Result and "status" variable.
+     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
+     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
+        You must use correct finish mode in that case. */
+
+typedef enum
+{
+  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
+  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
+  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
+  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
+  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
+} ELzmaStatus;
+
+/* ELzmaStatus is used only as output value for function call */
+
+
+/* ---------- Interfaces ---------- */
+
+/* There are 3 levels of interfaces:
+     1) Dictionary Interface
+     2) Buffer Interface
+     3) One Call Interface
+   You can select any of these interfaces, but don't mix functions from different
+   groups for same object. */
+
+
+/* There are two variants to allocate state for Dictionary Interface:
+     1) LzmaDec_Allocate / LzmaDec_Free
+     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
+   You can use variant 2, if you set dictionary buffer manually.
+   For Buffer Interface you must always use variant 1.
+
+LzmaDec_Allocate* can return:
+  SZ_OK
+  SZ_ERROR_MEM         - Memory allocation error
+  SZ_ERROR_UNSUPPORTED - Unsupported properties
+*/
+   
+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAllocPtr alloc);
+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAllocPtr alloc);
+
+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAllocPtr alloc);
+void LzmaDec_Free(CLzmaDec *p, ISzAllocPtr alloc);
+
+/* ---------- Dictionary Interface ---------- */
+
+/* You can use it, if you want to eliminate the overhead for data copying from
+   dictionary to some other external buffer.
+   You must work with CLzmaDec variables directly in this interface.
+
+   STEPS:
+     LzmaDec_Construct()
+     LzmaDec_Allocate()
+     for (each new stream)
+     {
+       LzmaDec_Init()
+       while (it needs more decompression)
+       {
+         LzmaDec_DecodeToDic()
+         use data from CLzmaDec::dic and update CLzmaDec::dicPos
+       }
+     }
+     LzmaDec_Free()
+*/
+
+/* LzmaDec_DecodeToDic
+   
+   The decoding to internal dictionary buffer (CLzmaDec::dic).
+   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
+
+finishMode:
+  It has meaning only if the decoding reaches output limit (dicLimit).
+  LZMA_FINISH_ANY - Decode just dicLimit bytes.
+  LZMA_FINISH_END - Stream must be finished after dicLimit.
+
+Returns:
+  SZ_OK
+    status:
+      LZMA_STATUS_FINISHED_WITH_MARK
+      LZMA_STATUS_NOT_FINISHED
+      LZMA_STATUS_NEEDS_MORE_INPUT
+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+  SZ_ERROR_DATA - Data error
+  SZ_ERROR_FAIL - Some unexpected error: internal error of code, memory corruption or hardware failure
+*/
+
+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+
+
+/* ---------- Buffer Interface ---------- */
+
+/* It's zlib-like interface.
+   See LzmaDec_DecodeToDic description for information about STEPS and return results,
+   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
+   to work with CLzmaDec variables manually.
+
+finishMode:
+  It has meaning only if the decoding reaches output limit (*destLen).
+  LZMA_FINISH_ANY - Decode just destLen bytes.
+  LZMA_FINISH_END - Stream must be finished after (*destLen).
+*/
+
+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+
+
+/* ---------- One Call Interface ---------- */
+
+/* LzmaDecode
+
+finishMode:
+  It has meaning only if the decoding reaches output limit (*destLen).
+  LZMA_FINISH_ANY - Decode just destLen bytes.
+  LZMA_FINISH_END - Stream must be finished after (*destLen).
+
+Returns:
+  SZ_OK
+    status:
+      LZMA_STATUS_FINISHED_WITH_MARK
+      LZMA_STATUS_NOT_FINISHED
+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+  SZ_ERROR_DATA - Data error
+  SZ_ERROR_MEM  - Memory allocation error
+  SZ_ERROR_UNSUPPORTED - Unsupported properties
+  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
+  SZ_ERROR_FAIL - Some unexpected error: internal error of code, memory corruption or hardware failure
+*/
+
+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
+    ELzmaStatus *status, ISzAllocPtr alloc);
+
+EXTERN_C_END
+
+#endif