config: deindent all help texts

Those two spaces after tab have no effect, and always a nuisance when editing.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

7 files changed, 92 insertions, 92 deletions

diff --git a/modutils/Config.src b/modutils/Config.src
index 9b76c83d2..e413702bb 100644
--- a/modutils/Config.src
+++ b/modutils/Config.src
@@ -9,29 +9,29 @@ config MODPROBE_SMALL
         bool "Simplified modutils"
         default y
         help
-          Build smaller (~1.5 kbytes), simplified module tools.
+        Build smaller (~1.5 kbytes), simplified module tools.
 
-          This option by itself does not enable any applets -
-          you need to select applets individually below.
+        This option by itself does not enable any applets -
+        you need to select applets individually below.
 
-          With this option modprobe does not require modules.dep file
-          and does not use /etc/modules.conf file.
-          It scans module files in /lib/modules/`uname -r` and
-          determines dependencies and module alias names on the fly.
-          This may make module loading slower, most notably
-          when one needs to load module by alias (this requires
-          scanning through module _bodies_).
+        With this option modprobe does not require modules.dep file
+        and does not use /etc/modules.conf file.
+        It scans module files in /lib/modules/`uname -r` and
+        determines dependencies and module alias names on the fly.
+        This may make module loading slower, most notably
+        when one needs to load module by alias (this requires
+        scanning through module _bodies_).
 
-          At the first attempt to load a module by alias modprobe
-          will try to generate modules.dep.bb file in order to speed up
-          future loads by alias. Failure to do so (read-only /lib/modules,
-          etc) is not reported, and future modprobes will be slow too.
+        At the first attempt to load a module by alias modprobe
+        will try to generate modules.dep.bb file in order to speed up
+        future loads by alias. Failure to do so (read-only /lib/modules,
+        etc) is not reported, and future modprobes will be slow too.
 
-          NB: modules.dep.bb file format is not compatible
-          with modules.dep file as created/used by standard module tools.
+        NB: modules.dep.bb file format is not compatible
+        with modules.dep file as created/used by standard module tools.
 
-          Additional module parameters can be stored in
-          /etc/modules/$module_name files.
+        Additional module parameters can be stored in
+        /etc/modules/$module_name files.
 
 INSERT
 
@@ -42,145 +42,145 @@ config FEATURE_CMDLINE_MODULE_OPTIONS
         default y
         depends on INSMOD || MODPROBE
         help
-          Allow insmod and modprobe take module options from the applets'
-          command line.
+        Allow insmod and modprobe take module options from the applets'
+        command line.
 
 config FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED
         bool "Skip loading of already loaded modules"
         default y
         depends on MODPROBE_SMALL && (DEPMOD || INSMOD || MODPROBE)
         help
-          Check if the module is already loaded.
+        Check if the module is already loaded.
 
 config FEATURE_2_4_MODULES
         bool "Support version 2.2/2.4 Linux kernels"
         default n
         depends on (INSMOD || LSMOD || MODPROBE || RMMOD) && !MODPROBE_SMALL
         help
-          Support module loading for 2.2.x and 2.4.x Linux kernels.
-          This increases size considerably. Say N unless you plan
-          to run ancient kernels.
+        Support module loading for 2.2.x and 2.4.x Linux kernels.
+        This increases size considerably. Say N unless you plan
+        to run ancient kernels.
 
 config FEATURE_INSMOD_VERSION_CHECKING
         bool "Enable module version checking"
         default n
         depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
         help
-          Support checking of versions for modules. This is used to
-          ensure that the kernel and module are made for each other.
+        Support checking of versions for modules. This is used to
+        ensure that the kernel and module are made for each other.
 
 config FEATURE_INSMOD_KSYMOOPS_SYMBOLS
         bool "Add module symbols to kernel symbol table"
         default n
         depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
         help
-          By adding module symbols to the kernel symbol table, Oops messages
-          occurring within kernel modules can be properly debugged. By enabling
-          this feature, module symbols will always be added to the kernel symbol
-          table for proper debugging support. If you are not interested in
-          Oops messages from kernel modules, say N.
+        By adding module symbols to the kernel symbol table, Oops messages
+        occurring within kernel modules can be properly debugged. By enabling
+        this feature, module symbols will always be added to the kernel symbol
+        table for proper debugging support. If you are not interested in
+        Oops messages from kernel modules, say N.
 
 config FEATURE_INSMOD_LOADINKMEM
         bool "In kernel memory optimization (uClinux only)"
         default n
         depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
         help
-          This is a special uClinux only memory optimization that lets insmod
-          load the specified kernel module directly into kernel space, reducing
-          memory usage by preventing the need for two copies of the module
-          being loaded into memory.
+        This is a special uClinux only memory optimization that lets insmod
+        load the specified kernel module directly into kernel space, reducing
+        memory usage by preventing the need for two copies of the module
+        being loaded into memory.
 
 config FEATURE_INSMOD_LOAD_MAP
         bool "Enable insmod load map (-m) option"
         default n
         depends on FEATURE_2_4_MODULES && INSMOD
         help
-          Enabling this, one would be able to get a load map
-          output on stdout. This makes kernel module debugging
-          easier.
-          If you don't plan to debug kernel modules, you
-          don't need this option.
+        Enabling this, one would be able to get a load map
+        output on stdout. This makes kernel module debugging
+        easier.
+        If you don't plan to debug kernel modules, you
+        don't need this option.
 
 config FEATURE_INSMOD_LOAD_MAP_FULL
         bool "Symbols in load map"
         default y
         depends on FEATURE_INSMOD_LOAD_MAP
         help
-          Without this option, -m will only output section
-          load map. With this option, -m will also output
-          symbols load map.
+        Without this option, -m will only output section
+        load map. With this option, -m will also output
+        symbols load map.
 
 config FEATURE_CHECK_TAINTED_MODULE
         bool "Support tainted module checking with new kernels"
         default y
         depends on (LSMOD || FEATURE_2_4_MODULES) && !MODPROBE_SMALL
         help
-          Support checking for tainted modules. These are usually binary
-          only modules that will make the linux-kernel list ignore your
-          support request.
-          This option is required to support GPLONLY modules.
+        Support checking for tainted modules. These are usually binary
+        only modules that will make the linux-kernel list ignore your
+        support request.
+        This option is required to support GPLONLY modules.
 
 config FEATURE_INSMOD_TRY_MMAP
         bool "Try to load module from a mmap'ed area"
         default n
         depends on (INSMOD || MODPROBE) && !MODPROBE_SMALL
         help
-          This option causes module loading code to try to mmap
-          module first. If it does not work (for example,
-          it does not work for compressed modules), module will be read
-          (and unpacked if needed) into a memory block allocated by malloc.
+        This option causes module loading code to try to mmap
+        module first. If it does not work (for example,
+        it does not work for compressed modules), module will be read
+        (and unpacked if needed) into a memory block allocated by malloc.
 
-          The only case when mmap works but malloc does not is when
-          you are trying to load a big module on a very memory-constrained
-          machine. Malloc will momentarily need 2x as much memory as mmap.
+        The only case when mmap works but malloc does not is when
+        you are trying to load a big module on a very memory-constrained
+        machine. Malloc will momentarily need 2x as much memory as mmap.
 
-          Choosing N saves about 250 bytes of code (on 32-bit x86).
+        Choosing N saves about 250 bytes of code (on 32-bit x86).
 
 config FEATURE_MODUTILS_ALIAS
         bool "Support module.aliases file"
         default y
         depends on (DEPMOD || MODPROBE) && !MODPROBE_SMALL
         help
-          Generate and parse modules.alias containing aliases for bus
-          identifiers:
-            alias pcmcia:m*c*f03fn*pfn*pa*pb*pc*pd* parport_cs
+        Generate and parse modules.alias containing aliases for bus
+        identifiers:
+                alias pcmcia:m*c*f03fn*pfn*pa*pb*pc*pd* parport_cs
 
-          and aliases for logical modules names e.g.:
-            alias padlock_aes aes
-            alias aes_i586 aes
-            alias aes_generic aes
+        and aliases for logical modules names e.g.:
+                alias padlock_aes aes
+                alias aes_i586 aes
+                alias aes_generic aes
 
-          Say Y if unsure.
+        Say Y if unsure.
 
 config FEATURE_MODUTILS_SYMBOLS
         bool "Support module.symbols file"
         default y
         depends on (DEPMOD || MODPROBE) && !MODPROBE_SMALL
         help
-          Generate and parse modules.symbols containing aliases for
-          symbol_request() kernel calls, such as:
-            alias symbol:usb_sg_init usbcore
+        Generate and parse modules.symbols containing aliases for
+        symbol_request() kernel calls, such as:
+                alias symbol:usb_sg_init usbcore
 
-          Say Y if unsure.
+        Say Y if unsure.
 
 config DEFAULT_MODULES_DIR
         string "Default directory containing modules"
         default "/lib/modules"
         depends on DEPMOD || MODPROBE || MODINFO
         help
-          Directory that contains kernel modules.
-          Defaults to "/lib/modules"
+        Directory that contains kernel modules.
+        Defaults to "/lib/modules"
 
 config DEFAULT_DEPMOD_FILE
         string "Default name of modules.dep"
         default "modules.dep"
         depends on DEPMOD || MODPROBE || MODINFO
         help
-          Filename that contains kernel modules dependencies.
-          Defaults to "modules.dep".
-          If you configured the "simplified modutils" (MODPROBE_SMALL), a
-          ".bb" suffix will be added after this name. Do not specify ".bb"
-          here unless you intend your depmod or modprobe to work on
-          "modules.dep.bb.bb" or such.
+        Filename that contains kernel modules dependencies.
+        Defaults to "modules.dep".
+        If you configured the "simplified modutils" (MODPROBE_SMALL), a
+        ".bb" suffix will be added after this name. Do not specify ".bb"
+        here unless you intend your depmod or modprobe to work on
+        "modules.dep.bb.bb" or such.
 
 endmenu
diff --git a/modutils/depmod.c b/modutils/depmod.c
index f6e889d8f..004c67a11 100644
--- a/modutils/depmod.c
+++ b/modutils/depmod.c
@@ -12,9 +12,9 @@
 //config:       default y
 //config:       select PLATFORM_LINUX
 //config:       help
-//config:         depmod generates modules.dep (and potentially modules.alias
-//config:         and modules.symbols) that contain dependency information
-//config:         for modprobe.
+//config:       depmod generates modules.dep (and potentially modules.alias
+//config:       and modules.symbols) that contain dependency information
+//config:       for modprobe.
 
 //applet:IF_DEPMOD(IF_NOT_MODPROBE_SMALL(APPLET(depmod, BB_DIR_SBIN, BB_SUID_DROP)))
 
diff --git a/modutils/insmod.c b/modutils/insmod.c
index 6f448f34d..b8ede8a81 100644
--- a/modutils/insmod.c
+++ b/modutils/insmod.c
@@ -11,7 +11,7 @@
 //config:       default y
 //config:       select PLATFORM_LINUX
 //config:       help
-//config:         insmod is used to load specified modules in the running kernel.
+//config:       insmod is used to load specified modules in the running kernel.
 
 //applet:IF_INSMOD(IF_NOT_MODPROBE_SMALL(APPLET(insmod, BB_DIR_SBIN, BB_SUID_DROP)))
 
diff --git a/modutils/lsmod.c b/modutils/lsmod.c
index 9fe0eff22..4bf8f8481 100644
--- a/modutils/lsmod.c
+++ b/modutils/lsmod.c
@@ -12,16 +12,16 @@
 //config:       default y
 //config:       select PLATFORM_LINUX
 //config:       help
-//config:         lsmod is used to display a list of loaded modules.
+//config:       lsmod is used to display a list of loaded modules.
 //config:
 //config:config FEATURE_LSMOD_PRETTY_2_6_OUTPUT
 //config:       bool "Pretty output"
 //config:       default y
 //config:       depends on LSMOD && !MODPROBE_SMALL
 //config:       help
-//config:         This option makes output format of lsmod adjusted to
-//config:         the format of module-init-tools for Linux kernel 2.6.
-//config:         Increases size somewhat.
+//config:       This option makes output format of lsmod adjusted to
+//config:       the format of module-init-tools for Linux kernel 2.6.
+//config:       Increases size somewhat.
 
 //applet:IF_LSMOD(IF_NOT_MODPROBE_SMALL(APPLET(lsmod, BB_DIR_SBIN, BB_SUID_DROP)))
 
diff --git a/modutils/modinfo.c b/modutils/modinfo.c
index 6eae1b7b1..371c93991 100644
--- a/modutils/modinfo.c
+++ b/modutils/modinfo.c
@@ -10,7 +10,7 @@
 //config:       default y
 //config:       select PLATFORM_LINUX
 //config:       help
-//config:         Show information about a Linux Kernel module
+//config:       Show information about a Linux Kernel module
 
 //applet:IF_MODINFO(APPLET(modinfo, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/modutils/modprobe.c b/modutils/modprobe.c
index 6bcfb9bcd..1a7db09f2 100644
--- a/modutils/modprobe.c
+++ b/modutils/modprobe.c
@@ -12,19 +12,19 @@
 //config:       default y
 //config:       select PLATFORM_LINUX
 //config:       help
-//config:         Handle the loading of modules, and their dependencies on a high
-//config:         level.
+//config:       Handle the loading of modules, and their dependencies on a high
+//config:       level.
 //config:
 //config:config FEATURE_MODPROBE_BLACKLIST
 //config:       bool "Blacklist support"
 //config:       default y
 //config:       depends on MODPROBE && !MODPROBE_SMALL
 //config:       help
-//config:         Say 'y' here to enable support for the 'blacklist' command in
-//config:         modprobe.conf. This prevents the alias resolver to resolve
-//config:         blacklisted modules. This is useful if you want to prevent your
-//config:         hardware autodetection scripts to load modules like evdev, frame
-//config:         buffer drivers etc.
+//config:       Say 'y' here to enable support for the 'blacklist' command in
+//config:       modprobe.conf. This prevents the alias resolver to resolve
+//config:       blacklisted modules. This is useful if you want to prevent your
+//config:       hardware autodetection scripts to load modules like evdev, frame
+//config:       buffer drivers etc.
 
 //applet:IF_MODPROBE(IF_NOT_MODPROBE_SMALL(APPLET(modprobe, BB_DIR_SBIN, BB_SUID_DROP)))
 
diff --git a/modutils/rmmod.c b/modutils/rmmod.c
index 1e87abf3a..d60e49413 100644
--- a/modutils/rmmod.c
+++ b/modutils/rmmod.c
@@ -12,7 +12,7 @@
 //config:       default y
 //config:       select PLATFORM_LINUX
 //config:       help
-//config:         rmmod is used to unload specified modules from the kernel.
+//config:       rmmod is used to unload specified modules from the kernel.
 
 //applet:IF_RMMOD(IF_NOT_MODPROBE_SMALL(APPLET(rmmod, BB_DIR_SBIN, BB_SUID_DROP)))