Andreas Mohr writes:

the busybox menuconfig triggered my "inacceptable number of spelling mistakes"
upper level, so I decided to make a patch ;-)

I also improved some wording to describe some things in a better way.

Many thanks for an incredible piece of software!

Andreas Mohr, random OSS developer

1 files changed, 22 insertions, 23 deletions

diff --git a/util-linux/Config.in b/util-linux/Config.in
index ffa31a009..2bb9c09cc 100644
--- a/util-linux/Config.in
+++ b/util-linux/Config.in
@@ -24,8 +24,8 @@ config CONFIG_FBSET
         help
           fbset is used to show or change the settings of a Linux frame buffer
           device.  The frame buffer device provides a simple and unique
-          interface to access a graphic display.  Enable this option if you wish
-          to enable the 'fbset' utility.
+          interface to access a graphics display.  Enable this option
+          if you wish to enable the 'fbset' utility.
 
 
 config CONFIG_FEATURE_FBSET_FANCY
@@ -34,7 +34,7 @@ config CONFIG_FEATURE_FBSET_FANCY
         depends on CONFIG_FBSET
         help
           This option enables extended fbset options, allowing one to set the
-          framebuffer size, color depth, etc.  interface to access a graphic
+          framebuffer size, color depth, etc.  interface to access a graphics
           display.  Enable this option if you wish to enable extended fbset
           options.
 
@@ -51,19 +51,19 @@ config CONFIG_FDFLUSH
         bool "fdflush"
         default n
         help
-          Fdflush is only needed when changing media on slightly-broken
+          fdflush is only needed when changing media on slightly-broken
           removable media drives.  It is used to make Linux believe that a
           hardware disk-change switch has been actuated, which causes Linux to
           forget anything it has cached from the previous media.  If you have
           such a slightly-broken drive, you will need to run fdflush every time
           you change a disk.  Most people have working hardware and can safely
-          say leave this disabled.
+          leave this disabled.
 
 config CONFIG_FDFORMAT
         bool "fdformat"
         default n
         help
-          Fdformat is used to low-level format a floppy disk.
+          fdformat is used to low-level format a floppy disk.
 
 config CONFIG_FDISK
         bool "fdisk"
@@ -76,12 +76,11 @@ config CONFIG_FDISK
 
 if !CONFIG_LFS
 config FDISK_SUPPORT_LARGE_DISKS
-        bool "  support over 4Gb disks"
+        bool "  support over 4GB disks"
         default y
         depends on CONFIG_FDISK
         help
-          Previous set detected unsupport large file, but you can support
-          large disks after enable this option
+          Enable this option to support large disks > 4GB.
 endif
 
 config CONFIG_FEATURE_FDISK_WRITABLE
@@ -152,7 +151,7 @@ config CONFIG_FSCK_MINIX
         help
           The minix filesystem is a nice, small, compact, read-write filesystem
           with little overhead.  It is not a journaling filesystem however and
-          can encounted corruption if it is not properly unmounted or if the
+          can experience corruption if it is not properly unmounted or if the
           power goes off in the middle of a write.  This utility allows you to
           check for and attempt to repair any corruption that occurs to a minix
           filesystem.
@@ -200,9 +199,9 @@ config CONFIG_HWCLOCK
         default n
         help
           The hwclock utility is used to read and set the hardware clock
-          on a system.  This is primarily used to set the correct time in
-          the hardware close, so the hardware will keep the correct time 
-          when Linux is _not_ running.
+          on a system.  This is primarily used to set the current time on
+          shutdown in the hardware clock, so the hardware will keep the
+          correct time when Linux is _not_ running.
 
 config CONFIG_FEATURE_HWCLOCK_LONGOPTIONS
         bool "  Support long options (--hctosys,...)"
@@ -210,7 +209,7 @@ config CONFIG_FEATURE_HWCLOCK_LONGOPTIONS
         depends on CONFIG_HWCLOCK
         help
           By default, the hwclock utility only uses short options.  If you
-          are overly fond of the long options, such as --hctosys, --utc, etc)
+          are overly fond of its long options, such as --hctosys, --utc, etc)
           then enable this option.
 
 config CONFIG_LOSETUP
@@ -230,15 +229,15 @@ config CONFIG_MKSWAP
           partition as if it were additional RAM, which can greatly increase
           the capability of low-memory machines.  This additional memory is
           much slower than real RAM, but can be very helpful at preventing your
-          applications being killed by the Linux out of memory (OOM) killer.  Once
-          you have created swap space using 'mkswap' you need to enable the swap
-          space using the 'swapon' utility.
+          applications being killed by the Linux out of memory (OOM) killer.
+          Once you have created swap space using 'mkswap' you need to enable
+          the swap space using the 'swapon' utility.
 
 config CONFIG_MORE
         bool "more"
         default n
         help
-          More is a simple utility which allows you to read text one screen
+          more is a simple utility which allows you to read text one screen
           sized page at a time.  If you want to read text that is larger than
           the screen, and you are using anything faster than a 300 baud modem,
           you will probably find this utility very helpful.  If you don't have
@@ -251,7 +250,7 @@ config CONFIG_FEATURE_USE_TERMIOS
         help
           This option allows utilities such as 'more' and 'top' to determine
           the size of the screen.  If you leave this disabled, your utilities
-          that display things on the screen with be especially primitive and
+          that display things on the screen will be especially primitive and
           will be unable to determine the current screen size, and will be
           unable to move the cursor.
 
@@ -268,7 +267,7 @@ config CONFIG_RDATE
         bool "rdate"
         default n
         help
-          The rdate utility allows you to syncronize the date and time of your 
+          The rdate utility allows you to synchronize the date and time of your 
           system clock with the date and time of a remote networked system using
           the RFC868 protocol, which is built into the inetd daemon on most
           systems.
@@ -296,7 +295,7 @@ config CONFIG_MOUNT
           the 'mount' utility.
 
 config CONFIG_NFSMOUNT
-        bool "  Support mounting nfs file systems"
+        bool "  Support mounting NFS file systems"
         default n
         depends on CONFIG_MOUNT
         help
@@ -330,8 +329,8 @@ config CONFIG_FEATURE_MOUNT_LOOP
           Enabling this feature allows mount to use the '-o' loop options,
           which lets you loop mount files.  Mount will automagically setup and
           free the necessary loop devices so you do not need to mess with the
-          'losetup' utility unless you really want to.  This is really only useful
-          if you plan to loop mount files.
+          'losetup' utility unless you really want to.  This is really
+          only useful if you plan to loop mount files.
 
 config CONFIG_FEATURE_MTAB_SUPPORT
         bool "  Support for a real /etc/mtab (instead of /proc/mounts)"