14 files changed, 2806 insertions, 1065 deletions
diff --git a/src/lib/libssl/Makefile b/src/lib/libssl/Makefile
index 3752563fc2..80fb532c3c 100644
--- a/src/lib/libssl/Makefile
+++ b/src/lib/libssl/Makefile
@@ -1,1046 +1,6 @@
-# Build wrapper for OpenSSL
+# $OpenBSD: Makefile,v 1.13 2002/09/03 18:59:55 markus Exp $
-# $OpenBSD: Makefile,v 1.12 2002/08/30 15:08:11 markus Exp $
-# Our lndir is hacked; specify a full path to avoid potential conflicts
+SUBDIR=crypto ssl man
-# with the one installed with X11.
-LNDIR=  /usr/bin/lndir
-# Figure out what flag we use to OpenSSL's configure. This
-# needs to be tested on all architectures.
-SSL_SRC=src
-OPENSSLDIR=     /etc/ssl
-SSLCONF=        --openssldir="${OPENSSLDIR}" OpenBSD-${MACHINE_ARCH}
-MUNGEDFILES= \
-        ${.OBJDIR}/${SSL_SRC}/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/Makefile.ssl \
-        ${.OBJDIR}/${SSL_SRC}/apps/CA.pl \
-        ${.OBJDIR}/${SSL_SRC}/apps/CA.pl.bak \
-        ${.OBJDIR}/${SSL_SRC}/apps/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/apps/der_chop \
-        ${.OBJDIR}/${SSL_SRC}/crypto/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/aes/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/asn1/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/bf/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/bio/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/bn/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/buffer/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/cast/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/comp/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/conf/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/des/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/des/asm/perlasm \
-        ${.OBJDIR}/${SSL_SRC}/crypto/dh/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/dsa/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/dso/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/ec/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/engine/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/err/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/evp/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/hmac/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/idea/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/krb5/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/lhash/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/md2/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/md4/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/md5/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/mdc2/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/objects/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/objects/obj_dat.h \
-        ${.OBJDIR}/${SSL_SRC}/crypto/objects/obj_mac.h \
-        ${.OBJDIR}/${SSL_SRC}/crypto/ocsp/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/opensslconf.h \
-        ${.OBJDIR}/${SSL_SRC}/crypto/pem/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/pkcs12/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/pkcs7/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/rand/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/rc2/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/rc4/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/rc5/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/ripemd/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/rsa/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/sha/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/stack/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/txt_db/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/ui/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/x509/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/crypto/x509v3/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/ssl/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/test/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/test/bftest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/bntest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/casttest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/destest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/dhtest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/dsatest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/ectest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/evp_test.c \
-        ${.OBJDIR}/${SSL_SRC}/test/evptests.txt \
-        ${.OBJDIR}/${SSL_SRC}/test/exptest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/hmactest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/ideatest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/md2test.c \
-        ${.OBJDIR}/${SSL_SRC}/test/md5test.c \
-        ${.OBJDIR}/${SSL_SRC}/test/mdc2test.c \
-        ${.OBJDIR}/${SSL_SRC}/test/randtest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/rc2test.c \
-        ${.OBJDIR}/${SSL_SRC}/test/rc4test.c \
-        ${.OBJDIR}/${SSL_SRC}/test/rc5test.c \
-        ${.OBJDIR}/${SSL_SRC}/test/rmdtest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/sha1test.c \
-        ${.OBJDIR}/${SSL_SRC}/test/shatest.c \
-        ${.OBJDIR}/${SSL_SRC}/test/ssltest.c \
-        ${.OBJDIR}/${SSL_SRC}/tools/Makefile \
-        ${.OBJDIR}/${SSL_SRC}/tools/c_rehash \
-        ${.OBJDIR}/BUF_MEM_new.pm \
-        ${.OBJDIR}/CRYPTO_set_locking_callback.pm \
-        ${.OBJDIR}/HMAC.pm \
-        ${.OBJDIR}/MD5.pm \
-        ${.OBJDIR}/MDC2.pm \
-        ${.OBJDIR}/RC4.pm \
-        ${.OBJDIR}/RIPEMD160.pm \
-        ${.OBJDIR}/SHA1.pm \
-        ${.OBJDIR}/des_random_key.pm
-.include <bsd.own.mk>           # for NOMAN
-.ifndef NOMAN
-MANALL= \
-        BN_CTX_new.cat3 \
-        BN_CTX_start.cat3 \
-        BN_add.cat3 \
-        BN_add_word.cat3 \
-        BN_bn2bin.cat3 \
-        BN_cmp.cat3 \
-        BN_copy.cat3 \
-        BN_generate_prime.cat3 \
-        BN_mod_inverse.cat3 \
-        BN_mod_mul_montgomery.cat3 \
-        BN_mod_mul_reciprocal.cat3 \
-        BN_new.cat3 \
-        BN_num_bytes.cat3 \
-        BN_rand.cat3 \
-        BN_set_bit.cat3 \
-        BN_swap.cat3 \
-        BN_zero.cat3 \
-        BUF_MEM_new.cat3 \
-        BUF_MEM_new.cat3 \
-        CRYPTO_set_ex_data.cat3 \
-        CRYPTO_set_locking_callback.cat3 \
-        DH_generate_key.cat3 \
-        DH_generate_parameters.cat3 \
-        DH_get_ex_new_index.cat3 \
-        DH_new.cat3 \
-        DH_set_method.cat3 \
-        DH_size.cat3 \
-        DSA_SIG_new.cat3 \
-        DSA_do_sign.cat3 \
-        DSA_dup_DH.cat3 \
-        DSA_generate_key.cat3 \
-        DSA_generate_parameters.cat3 \
-        DSA_get_ex_new_index.cat3 \
-        DSA_new.cat3 \
-        DSA_set_method.cat3 \
-        DSA_sign.cat3 \
-        DSA_size.cat3 \
-        ERR_GET_LIB.cat3 \
-        ERR_clear_error.cat3 \
-        ERR_error_string.cat3 \
-        ERR_get_error.cat3 \
-        ERR_load_crypto_strings.cat3 \
-        ERR_load_strings.cat3 \
-        ERR_print_errors.cat3 \
-        ERR_put_error.cat3 \
-        ERR_remove_state.cat3 \
-        EVP_BytesToKey.cat3 \
-        EVP_DigestInit.cat3 \
-        EVP_EncryptInit.cat3 \
-        EVP_OpenInit.cat3 \
-        EVP_SealInit.cat3 \
-        EVP_SignInit.cat3 \
-        EVP_VerifyInit.cat3 \
-        HMAC.cat3 \
-        MD5.cat3 \
-        MDC2.cat3 \
-        OPENSSL_VERSION_NUMBER.cat3 \
-        OpenSSL_add_all_algorithms.cat3 \
-        RAND_add.cat3 \
-        RAND_bytes.cat3 \
-        RAND_cleanup.cat3 \
-        RAND_egd.cat3 \
-        RAND_load_file.cat3 \
-        RAND_set_rand_method.cat3 \
-        RC4.cat3 \
-        RIPEMD160.cat3 \
-        RSA_blinding_on.cat3 \
-        RSA_check_key.cat3 \
-        RSA_generate_key.cat3 \
-        RSA_get_ex_new_index.cat3 \
-        RSA_new.cat3 \
-        RSA_padding_add_PKCS1_type_1.cat3 \
-        RSA_print.cat3 \
-        RSA_private_encrypt.cat3 \
-        RSA_public_encrypt.cat3 \
-        RSA_set_method.cat3 \
-        RSA_sign.cat3 \
-        RSA_sign_ASN1_OCTET_STRING.cat3 \
-        RSA_size.cat3 \
-        SHA1.cat3 \
-        SSL_CIPHER_get_name.cat3 \
-        SSL_COMP_add_compression_method.cat3 \
-        SSL_CTX_add_extra_chain_cert.cat3 \
-        SSL_CTX_add_session.cat3 \
-        SSL_CTX_ctrl.cat3 \
-        SSL_CTX_flush_sessions.cat3 \
-        SSL_CTX_free.cat3 \
-        SSL_CTX_get_ex_new_index.cat3 \
-        SSL_CTX_get_verify_mode.cat3 \
-        SSL_CTX_load_verify_locations.cat3 \
-        SSL_CTX_new.cat3 \
-        SSL_CTX_sess_number.cat3 \
-        SSL_CTX_sess_set_cache_size.cat3 \
-        SSL_CTX_sess_set_get_cb.cat3 \
-        SSL_CTX_sessions.cat3 \
-        SSL_CTX_set_cert_store.cat3 \
-        SSL_CTX_set_cert_verify_callback.cat3 \
-        SSL_CTX_set_cipher_list.cat3 \
-        SSL_CTX_set_client_CA_list.cat3 \
-        SSL_CTX_set_client_cert_cb.cat3 \
-        SSL_CTX_set_default_passwd_cb.cat3 \
-        SSL_CTX_set_generate_session_id.cat3 \
-        SSL_CTX_set_info_callback.cat3 \
-        SSL_CTX_set_max_cert_list.cat3 \
-        SSL_CTX_set_mode.cat3 \
-        SSL_CTX_set_msg_callback.cat3 \
-        SSL_CTX_set_options.cat3 \
-        SSL_CTX_set_quiet_shutdown.cat3 \
-        SSL_CTX_set_session_cache_mode.cat3 \
-        SSL_CTX_set_session_id_context.cat3 \
-        SSL_CTX_set_ssl_version.cat3 \
-        SSL_CTX_set_timeout.cat3 \
-        SSL_CTX_set_tmp_dh_callback.cat3 \
-        SSL_CTX_set_tmp_rsa_callback.cat3 \
-        SSL_CTX_set_verify.cat3 \
-        SSL_CTX_use_certificate.cat3 \
-        SSL_SESSION_free.cat3 \
-        SSL_SESSION_get_ex_new_index.cat3 \
-        SSL_SESSION_get_time.cat3 \
-        SSL_accept.cat3 \
-        SSL_alert_type_string.cat3 \
-        SSL_clear.cat3 \
-        SSL_connect.cat3 \
-        SSL_free.cat3 \
-        SSL_get_SSL_CTX.cat3 \
-        SSL_get_ciphers.cat3 \
-        SSL_get_client_CA_list.cat3 \
-        SSL_get_current_cipher.cat3 \
-        SSL_get_default_timeout.cat3 \
-        SSL_get_error.cat3 \
-        SSL_get_ex_data_X509_STORE_CTX_idx.cat3 \
-        SSL_get_ex_new_index.cat3 \
-        SSL_get_fd.cat3 \
-        SSL_get_peer_cert_chain.cat3 \
-        SSL_get_peer_certificate.cat3 \
-        SSL_get_rbio.cat3 \
-        SSL_get_session.cat3 \
-        SSL_get_verify_result.cat3 \
-        SSL_get_version.cat3 \
-        SSL_library_init.cat3 \
-        SSL_load_client_CA_file.cat3 \
-        SSL_new.cat3 \
-        SSL_pending.cat3 \
-        SSL_read.cat3 \
-        SSL_rstate_string.cat3 \
-        SSL_session_reused.cat3 \
-        SSL_set_bio.cat3 \
-        SSL_set_connect_state.cat3 \
-        SSL_set_fd.cat3 \
-        SSL_set_session.cat3 \
-        SSL_set_shutdown.cat3 \
-        SSL_set_verify_result.cat3 \
-        SSL_shutdown.cat3 \
-        SSL_state_string.cat3 \
-        SSL_want.cat3 \
-        SSL_write.cat3 \
-        blowfish.cat3 \
-        bn.cat3 \
-        bn_internal.cat3 \
-        crypto.cat3 \
-        d2i_DHparams.cat3 \
-        d2i_RSAPublicKey.cat3 \
-        d2i_SSL_SESSION.cat3 \
-        des_modes.cat7 \
-        des_random_key.cat3 \
-        dh.cat3 \
-        dsa.cat3 \
-        lh_stats.cat3 \
-        lhash.cat3 \
-        openssl.cat1 \
-        rsa.cat3 \
-        ssl.cat3
-.if MANPS
-PSALL=  ${MANALL:S/.cat1/.ps1/g:S/.cat2/.ps2/g:S/.cat3/.ps3/g:S/.cat4/.ps4/g:S/.cat5/.ps5/g:S/.cat6/.ps6/g:S/.cat7/.ps7/g:S/.cat8/.ps8/g:S/.cat9/.ps9/g}
-.endif
-# these are is a real problem, since they re-document functions described in
-# other pages.
-#
-# err.pod -> ERR_get_error.pod
-# ERR_peek_error ERR_get_error_line
-# ERR_peek_error_line ERR_get_error_line_data ERR_peek_error_line_data
-# ERR_GET_LIB ERR_GET_FUNC ERR_GET_REASON ERR_clear_error ERR_error_string
-# ERR_lib_error_string ERR_func_error_string ERR_reason_error_string
-# ERR_print_errors ERR_print_errors_fp ERR_load_crypto_strings ERR_free_strings
-# ERR_remove_state ERR_put_error ERR_add_error_data ERR_load_strings ERR_PACK
-# ERR_get_next_error_library
-#
-# rand.pod -> RAND_bytes.pod
-# RAND_pseudo_bytes RAND_seed RAND_add RAND_status RAND_event
-# RAND_screen RAND_load_file RAND_write_file RAND_file_name RAND_egd
-# RAND_set_rand_method RAND_get_rand_method RAND_SSLeay RAND_cleanup
-# buffer.pod -> BUF_MEM_new.pod
-# BUF_MEM_free BUF_MEM_grow BUF_strdup
-BUF_MEM_new.cat3: buffer.pod
-        ( cp ${.ALLSRC} BUF_MEM_new.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          BUF_MEM_new.pm ) | nroff -Tascii -man > ${.TARGET}
-.if MANPS
-BUF_MEM_new.ps3: buffer.pod
-        ( cp ${.ALLSRC} BUF_MEM_new.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          BUF_MEM_new.pm ) | nroff -Tps -man > ${.TARGET}
-.endif
-# rc4.pod -> RC4.pod
-# RC4_set_key
-RC4.cat3: rc4.pod
-        ( cp ${.ALLSRC} RC4.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          RC4.pm ) | nroff -Tascii -man > ${.TARGET}
-.if MANPS
-RC4.ps3: rc4.pod
-        ( cp ${.ALLSRC} RC4.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          RC4.pm ) | nroff -Tps -man > ${.TARGET}
-.endif
-# threads.pod -> CRYPTO_set_locking_callback.pod
-# CRYPTO_set_id_callback CRYPTO_num_locks
-CRYPTO_set_locking_callback.cat3: threads.pod
-        ( cp ${.ALLSRC} CRYPTO_set_locking_callback.pm && \
-          pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          CRYPTO_set_locking_callback.pm ) | nroff -Tascii -man > ${.TARGET}
-.if MANPS
-CRYPTO_set_locking_callback.ps3: threads.pod
-        ( cp ${.ALLSRC} CRYPTO_set_locking_callback.pm && \
-          pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          CRYPTO_set_locking_callback.pm ) | nroff -Tps -man > ${.TARGET}
-.endif
-# ripemd.pod -> RIPEMD160.pod
-# RIPEMD160_Init RIPEMD160_Update RIPEMD160_Final
-RIPEMD160.cat3: ripemd.pod
-        ( cp ${.ALLSRC} RIPEMD160.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          RIPEMD160.pm ) | nroff -Tascii -man > ${.TARGET}
-.if MANPS
-RIPEMD160.ps3: ripemd.pod
-        ( cp ${.ALLSRC} RIPEMD160.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          RIPEMD160.pm ) | nroff -Tps -man > ${.TARGET}
-.endif
-# sha.pod -> SHA1.pod
-SHA1.cat3: sha.pod
-        ( cp ${.ALLSRC} SHA1.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          SHA1.pm ) | nroff -Tascii -man > ${.TARGET}
-.if MANPS
-SHA1.ps3: sha.pod
-        ( cp ${.ALLSRC} SHA1.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          SHA1.pm ) | nroff -Tps -man > ${.TARGET}
-.endif
-# md5.pod -> MD5.pod
-MD5.cat3: md5.pod
-        ( cp ${.ALLSRC} MD5.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          MD5.pm ) | nroff -Tascii -man > ${.TARGET}
-.if MANPS
-MD5.ps3: md5.pod
-        ( cp ${.ALLSRC} MD5.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          MD5.pm ) | nroff -Tps -man > ${.TARGET}
-.endif
-# mdc2.pod -> MDC2.pod
-MDC2.cat3: mdc2.pod
-        ( cp ${.ALLSRC} MDC2.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          MDC2.pm ) | nroff -Tascii -man > ${.TARGET}
-.if MANPS
-MDC2.ps3: mdc2.pod
-        ( cp ${.ALLSRC} MDC2.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          MDC2.pm ) | nroff -Tps -man > ${.TARGET}
-.endif
-# hmac.pod -> HMAC.pod
-HMAC.cat3: hmac.pod
-        ( cp ${.ALLSRC} HMAC.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          HMAC.pm ) | nroff -Tascii -man > ${.TARGET}
-.if MANPS
-HMAC.ps3: hmac.pod
-        ( cp ${.ALLSRC} HMAC.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          HMAC.pm ) | nroff -Tps -man > ${.TARGET}
-.endif
-# des.pod -> des_random_key, des_set_key, des_key_sched, des_set_key_checked,
-# des_set_key_unchecked, des_set_odd_parity, des_is_weak_key, des_ecb_encrypt,
-# des_ecb2_encrypt, des_ecb3_encrypt, des_ncbc_encrypt, des_cfb_encrypt,
-# des_ofb_encrypt, des_pcbc_encrypt, des_cfb64_encrypt, des_ofb64_encrypt,
-# des_xcbc_encrypt, des_ede2_cbc_encrypt, des_ede2_cfb64_encrypt,
-# des_ede2_ofb64_encrypt, des_ede3_cbc_encrypt, des_ede3_cbcm_encrypt,
-# des_ede3_cfb64_encrypt, des_ede3_ofb64_encrypt, des_read_password,
-# des_read_2passwords, des_read_pw_string, des_cbc_cksum, des_quad_cksum,
-# des_string_to_key, des_string_to_2keys, des_fcrypt, des_crypt,
-# des_enc_read, des_enc_write
-des_random_key.cat3: des.pod
-        ( cp ${.ALLSRC} des_random_key.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          des_random_key.pm ) | nroff -Tascii -man > ${.TARGET}
-.if MANPS
-des_random_key.ps3: des.pod
-        ( cp ${.ALLSRC} des_random_key.pm && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          des_random_key.pm ) | nroff -Tps -man > ${.TARGET}
-.endif
-MLINKS+=\
-        BN_CTX_new.3 BN_CTX_free.3 \
-        BN_CTX_new.3 BN_CTX_init.3 \
-        BN_CTX_start.3 BN_CTX_end.3 \
-        BN_CTX_start.3 BN_CTX_get.3 \
-        BN_add.3 BN_div.3 \
-        BN_add.3 BN_exp.3 \
-        BN_add.3 BN_gcd.3 \
-        BN_add.3 BN_mod.3 \
-        BN_add.3 BN_mod_exp.3 \
-        BN_add.3 BN_mod_mul.3 \
-        BN_add.3 BN_mul.3 \
-        BN_add.3 BN_sqr.3 \
-        BN_add.3 BN_sub.3 \
-        BN_add_word.3 BN_div_word.3 \
-        BN_add_word.3 BN_mod_word.3 \
-        BN_add_word.3 BN_mul_word.3 \
-        BN_add_word.3 BN_sub_word.3 \
-        BN_bn2bin.3 BN_bin2bn.3 \
-        BN_bn2bin.3 BN_bn2dec.3 \
-        BN_bn2bin.3 BN_bn2hex.3 \
-        BN_bn2bin.3 BN_bn2mpi.3 \
-        BN_bn2bin.3 BN_dec2bn.3 \
-        BN_bn2bin.3 BN_hex2bn.3 \
-        BN_bn2bin.3 BN_mpi2bn.3 \
-        BN_bn2bin.3 BN_print.3 \
-        BN_bn2bin.3 BN_print_fp.3 \
-        BN_cmp.3 BN_is_odd.3 \
-        BN_cmp.3 BN_is_one.3 \
-        BN_cmp.3 BN_is_word.3 \
-        BN_cmp.3 BN_is_zero.3 \
-        BN_cmp.3 BN_ucmp.3 \
-        BN_copy.3 BN_dup.3 \
-        BN_generate_prime.3 BN_is_prime.3 \
-        BN_generate_prime.3 BN_is_prime_fasttest.3 \
-        BN_mod_mul_montgomery.3 BN_MONT_CTX_copy.3 \
-        BN_mod_mul_montgomery.3 BN_MONT_CTX_free.3 \
-        BN_mod_mul_montgomery.3 BN_MONT_CTX_init.3 \
-        BN_mod_mul_montgomery.3 BN_MONT_CTX_new.3 \
-        BN_mod_mul_montgomery.3 BN_MONT_CTX_set.3 \
-        BN_mod_mul_montgomery.3 BN_from_montgomery.3 \
-        BN_mod_mul_montgomery.3 BN_to_montgomery.3 \
-        BN_mod_mul_reciprocal.3 BN_RECP_CTX_free.3 \
-        BN_mod_mul_reciprocal.3 BN_RECP_CTX_init.3 \
-        BN_mod_mul_reciprocal.3 BN_RECP_CTX_new.3 \
-        BN_mod_mul_reciprocal.3 BN_RECP_CTX_set.3 \
-        BN_mod_mul_reciprocal.3 BN_div_recp.3 \
-        BN_new.3 BN_clear.3 \
-        BN_new.3 BN_clear_free.3 \
-        BN_new.3 BN_free.3 \
-        BN_new.3 BN_init.3 \
-        BN_num_bytes.3 BN_num_bits.3 \
-        BN_num_bytes.3 BN_num_bits_word.3 \
-        BN_rand.3 BN_pseudo_rand.3 \
-        BN_rand.3 BN_rand_range.3 \
-        BN_set_bit.3 BN_clear_bit.3 \
-        BN_set_bit.3 BN_is_bit_set.3 \
-        BN_set_bit.3 BN_lshift.3 \
-        BN_set_bit.3 BN_lshift1.3 \
-        BN_set_bit.3 BN_mask_bits.3 \
-        BN_set_bit.3 BN_rshift.3 \
-        BN_set_bit.3 BN_rshift1.3 \
-        BN_zero.3 BN_get_word.3 \
-        BN_zero.3 BN_one.3 \
-        BN_zero.3 BN_set_word.3 \
-        BN_zero.3 BN_value_one.3 \
-        BUF_MEM_new.3 BUF_MEM_free.3 \
-        BUF_MEM_new.3 BUF_MEM_grow.3 \
-        BUF_MEM_new.3 BUF_strdup.3 \
-        CRYPTO_set_ex_data.3 CRYPTO_get_ex_data.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_add.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_add_lock.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_destroy_dynlockid.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_get_new_dynlockid.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_lock.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_num_locks.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_r_lock.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_r_unlock.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_set_dynlock_create_callback.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_set_dynlock_destroy_callback.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_set_dynlock_lock_callback.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_set_id_callback.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_w_lock.3 \
-        CRYPTO_set_locking_callback.3 CRYPTO_w_unlock.3 \
-        DH_generate_key.3 DH_compute_key.3 \
-        DH_generate_parameters.3 DH_check.3 \
-        DH_get_ex_new_index.3 DH_get_ex_data.3 \
-        DH_get_ex_new_index.3 DH_set_ex_data.3 \
-        DH_new.3 DH_free.3 \
-        DH_set_method.3 DH_OpenSSL.3 \
-        DH_set_method.3 DH_get_default_method.3 \
-        DH_set_method.3 DH_get_default_openssl_method.3 \
-        DH_set_method.3 DH_new_method.3 \
-        DH_set_method.3 DH_set_default_method.3 \
-        DH_set_method.3 DH_set_default_openssl_method.3 \
-        DSA_new.3 DSA_free.3 \
-        DSA_set_method.3 DSA_OpenSSL.3 \
-        DSA_set_method.3 DSA_get_default_method.3 \
-        DSA_set_method.3 DSA_get_default_openssl_method.3 \
-        DSA_set_method.3 DSA_new_method.3 \
-        DSA_set_method.3 DSA_set_default_method.3 \
-        DSA_set_method.3 DSA_set_default_openssl_method.3 \
-        DSA_sign.3 DSA_sign_setup.3 \
-        DSA_sign.3 DSA_verify.3 \
-        ERR_GET_LIB.3 ERR_GET_FUNC.3 \
-        ERR_GET_LIB.3 ERR_GET_REASON.3 \
-        ERR_error_string.3 ERR_error_string_n.3 \
-        ERR_error_string.3 ERR_func_error_string.3 \
-        ERR_error_string.3 ERR_lib_error_string.3 \
-        ERR_error_string.3 ERR_reason_error_string.3 \
-        ERR_get_error.3 ERR_get_error_line.3 \
-        ERR_get_error.3 ERR_get_error_line_data.3 \
-        ERR_get_error.3 ERR_peek_error.3 \
-        ERR_get_error.3 ERR_peek_error_line.3 \
-        ERR_get_error.3 ERR_peek_error_line_data.3 \
-        ERR_load_crypto_strings.3 ERR_free_strings.3 \
-        ERR_load_crypto_strings.3 SSL_load_error_strings.3 \
-        ERR_load_strings.3 ERR_PACK.3 \
-        ERR_load_strings.3 ERR_get_next_error_library.3 \
-        ERR_print_errors.3 ERR_print_errors_fp.3 \
-        ERR_put_error.3 ERR_add_error_data.3 \
-        EVP_DigestInit.3 EVP_DigestFinal.3 \
-        EVP_DigestInit.3 EVP_DigestUpdate.3 \
-        EVP_DigestInit.3 EVP_MD_CTX_block_size.3 \
-        EVP_DigestInit.3 EVP_MD_CTX_copy.3 \
-        EVP_DigestInit.3 EVP_MD_CTX_md.3 \
-        EVP_DigestInit.3 EVP_MD_CTX_size.3 \
-        EVP_DigestInit.3 EVP_MD_CTX_type.3 \
-        EVP_DigestInit.3 EVP_MD_block_size.3 \
-        EVP_DigestInit.3 EVP_MD_block_size.3 \
-        EVP_DigestInit.3 EVP_MD_pkey_type.3 \
-        EVP_DigestInit.3 EVP_MD_size.3 \
-        EVP_DigestInit.3 EVP_MD_size.3 \
-        EVP_DigestInit.3 EVP_MD_type.3 \
-        EVP_DigestInit.3 EVP_MD_type.3 \
-        EVP_DigestInit.3 EVP_dss.3 \
-        EVP_DigestInit.3 EVP_dss1.3 \
-        EVP_DigestInit.3 EVP_get_digestbyname.3 \
-        EVP_DigestInit.3 EVP_get_digestbyname.3 \
-        EVP_DigestInit.3 EVP_get_digestbynid.3 \
-        EVP_DigestInit.3 EVP_get_digestbynid.3 \
-        EVP_DigestInit.3 EVP_get_digestbyobj.3 \
-        EVP_DigestInit.3 EVP_md2.3 \
-        EVP_DigestInit.3 EVP_md5.3 \
-        EVP_DigestInit.3 EVP_md_null.3 \
-        EVP_DigestInit.3 EVP_mdc2.3 \
-        EVP_DigestInit.3 EVP_ripemd160.3 \
-        EVP_DigestInit.3 EVP_sha.3 \
-        EVP_DigestInit.3 EVP_sha1.3 \
-        EVP_DigestInit.3 OBJ_nid2sn.3 \
-        EVP_DigestInit.3 OBJ_obj2nid.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_CTX_block_size.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_CTX_cipher.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_CTX_cipher.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_CTX_cleanup.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_CTX_ctrl.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_CTX_iv_length.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_CTX_key_length.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_CTX_nid.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_CTX_set_key_length.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_CTX_type.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_asn1_to_param.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_block_size.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_iv_length.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_key_length.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_nid.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_param_to_asn1.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_type.3 \
-        EVP_EncryptInit.3 EVP_CIPHER_type.3 \
-        EVP_EncryptInit.3 EVP_CipherFinal.3 \
-        EVP_EncryptInit.3 EVP_CipherInit.3 \
-        EVP_EncryptInit.3 EVP_CipherUpdate.3 \
-        EVP_EncryptInit.3 EVP_DecryptFinal.3 \
-        EVP_EncryptInit.3 EVP_DecryptInit.3 \
-        EVP_EncryptInit.3 EVP_DecryptUpdate.3 \
-        EVP_EncryptInit.3 EVP_EncryptFinal.3 \
-        EVP_EncryptInit.3 EVP_EncryptUpdate.3 \
-        EVP_EncryptInit.3 EVP_get_cipherbyname.3 \
-        EVP_EncryptInit.3 EVP_get_cipherbyname.3 \
-        EVP_EncryptInit.3 EVP_get_cipherbynid.3 \
-        EVP_EncryptInit.3 EVP_get_cipherbynid.3 \
-        EVP_EncryptInit.3 EVP_get_cipherbyobj.3 \
-        EVP_EncryptInit.3 OBJ_nid2sn.3 \
-        EVP_EncryptInit.3 OBJ_obj2nid.3 \
-        EVP_OpenInit.3 EVP_OpenFinal.3 \
-        EVP_OpenInit.3 EVP_OpenUpdate.3 \
-        EVP_SealInit.3 EVP_SealFinal.3 \
-        EVP_SealInit.3 EVP_SealUpdate.3 \
-        EVP_SignInit.3 EVP_PKEY_size.3 \
-        EVP_SignInit.3 EVP_SignFinal.3 \
-        EVP_SignInit.3 EVP_SignUpdate.3 \
-        EVP_VerifyInit.3 EVP_VerifyFinal.3 \
-        EVP_VerifyInit.3 EVP_VerifyUpdate.3 \
-        HMAC.3 HMAC_Final.3 \
-        HMAC.3 HMAC_Init.3 \
-        HMAC.3 HMAC_Update.3 \
-        HMAC.3 HMAC_cleanup.3 \
-        MD5.3 MD2.3 \
-        MD5.3 MD2_Final.3 \
-        MD5.3 MD2_Init.3 \
-        MD5.3 MD2_Update.3 \
-        MD5.3 MD4.3 \
-        MD5.3 MD4_Final.3 \
-        MD5.3 MD4_Init.3 \
-        MD5.3 MD4_Update.3 \
-        MD5.3 MD5_Final.3 \
-        MD5.3 MD5_Init.3 \
-        MD5.3 MD5_Update.3 \
-        MDC2.3 MDC2_Final.3 \
-        MDC2.3 MDC2_Init.3 \
-        MDC2.3 MDC2_Update.3 \
-        OPENSSL_VERSION_NUMBER.3 SSLeay.3 \
-        OPENSSL_VERSION_NUMBER.3 SSLeay_version.3 \
-        OpenSSL_add_all_algorithms.3 EVP_cleanup.3 \
-        OpenSSL_add_all_algorithms.3 OpenSSL_add_all_ciphers.3 \
-        OpenSSL_add_all_algorithms.3 OpenSSL_add_all_digests.3 \
-        RAND_add.3 RAND_event.3 \
-        RAND_add.3 RAND_screen.3 \
-        RAND_add.3 RAND_seed.3 \
-        RAND_add.3 RAND_status.3 \
-        RAND_bytes.3 RAND_pseudo_bytes.3 \
-        RAND_bytes.3 RAND_pseudo_bytes.3 \
-        RAND_egd.3 RAND_egd_bytes.3 \
-        RAND_load_file.3 RAND_file_name.3 \
-        RAND_load_file.3 RAND_file_name.3 \
-        RAND_load_file.3 RAND_write_file.3 \
-        RAND_load_file.3 RAND_write_file.3 \
-        RAND_set_rand_method.3 RAND_SSLeay.3 \
-        RAND_set_rand_method.3 RAND_SSLeay.3 \
-        RAND_set_rand_method.3 RAND_get_rand_method.3 \
-        RAND_set_rand_method.3 RAND_get_rand_method.3 \
-        RC4.3 RC4_set_key.3 \
-        RIPEMD160.3 RIPEMD160_Final.3 \
-        RIPEMD160.3 RIPEMD160_Init.3 \
-        RIPEMD160.3 RIPEMD160_Update.3 \
-        RSA_blinding_on.3 RSA_blinding_off.3 \
-        RSA_get_ex_new_index.3 RSA_get_ex_data.3 \
-        RSA_get_ex_new_index.3 RSA_set_ex_data.3 \
-        RSA_new.3 RSA_free.3 \
-        RSA_padding_add_PKCS1_type_1.3 RSA_padding_add_PKCS1_OAEP.3 \
-        RSA_padding_add_PKCS1_type_1.3 RSA_padding_add_PKCS1_type_2.3 \
-        RSA_padding_add_PKCS1_type_1.3 RSA_padding_add_SSLv23.3 \
-        RSA_padding_add_PKCS1_type_1.3 RSA_padding_add_none.3 \
-        RSA_padding_add_PKCS1_type_1.3 RSA_padding_check_PKCS1_OAEP.3 \
-        RSA_padding_add_PKCS1_type_1.3 RSA_padding_check_PKCS1_type_1.3 \
-        RSA_padding_add_PKCS1_type_1.3 RSA_padding_check_PKCS1_type_2.3 \
-        RSA_padding_add_PKCS1_type_1.3 RSA_padding_check_SSLv23.3 \
-        RSA_padding_add_PKCS1_type_1.3 RSA_padding_check_none.3 \
-        RSA_print.3 DHparams_print.3 \
-        RSA_print.3 DHparams_print.3 \
-        RSA_print.3 DHparams_print_fp.3 \
-        RSA_print.3 DHparams_print_fp.3 \
-        RSA_print.3 DSA_print.3 \
-        RSA_print.3 DSA_print_fp.3 \
-        RSA_print.3 DSA_print_fp.3 \
-        RSA_print.3 DSAparams_print.3 \
-        RSA_print.3 DSAparams_print.3 \
-        RSA_print.3 DSAparams_print_fp.3 \
-        RSA_print.3 DSAparams_print_fp.3 \
-        RSA_print.3 RSA_print_fp.3 \
-        RSA_print.3 RSA_print_fp.3 \
-        RSA_private_encrypt.3 RSA_public_decrypt.3 \
-        RSA_public_encrypt.3 RSA_private_decrypt.3 \
-        RSA_set_method.3 RSA_PKCS1_RSAref.3 \
-        RSA_set_method.3 RSA_PKCS1_SSLeay.3 \
-        RSA_set_method.3 RSA_flags.3 \
-        RSA_set_method.3 RSA_get_default_method.3 \
-        RSA_set_method.3 RSA_get_default_openssl_method.3 \
-        RSA_set_method.3 RSA_get_method.3 \
-        RSA_set_method.3 RSA_new_method.3 \
-        RSA_set_method.3 RSA_null_method.3 \
-        RSA_set_method.3 RSA_set_default_method.3 \
-        RSA_set_method.3 RSA_set_default_openssl_method.3 \
-        RSA_sign.3 RSA_verify.3 \
-        RSA_sign_ASN1_OCTET_STRING.3 RSA_verify_ASN1_OCTET_STRING.3 \
-        SHA1.3 SHA1_Final.3 \
-        SHA1.3 SHA1_Init.3 \
-        SHA1.3 SHA1_Update.3 \
-        SSL_CIPHER_get_name.3 SSL_CIPHER_description.3 \
-        SSL_CIPHER_get_name.3 SSL_CIPHER_get_bits.3 \
-        SSL_CIPHER_get_name.3 SSL_CIPHER_get_version.3 \
-        SSL_CTX_add_session.3 SSL_CTX_remove_session.3 \
-        SSL_CTX_add_session.3 SSL_add_session.3 \
-        SSL_CTX_add_session.3 SSL_remove_session.3 \
-        SSL_CTX_ctrl.3 SSL_CTX_callback_ctrl.3 \
-        SSL_CTX_ctrl.3 SSL_callback_ctrl.3 \
-        SSL_CTX_ctrl.3 SSL_ctrl.3 \
-        SSL_CTX_flush_sessions.3 SSL_flush_sessions.3 \
-        SSL_CTX_get_ex_new_index.3 SSL_CTX_get_ex_data.3 \
-        SSL_CTX_get_ex_new_index.3 SSL_CTX_set_ex_data.3 \
-        SSL_CTX_get_verify_mode.3 SSL_CTX_get_verify_callback.3 \
-        SSL_CTX_get_verify_mode.3 SSL_CTX_get_verify_depth.3 \
-        SSL_CTX_get_verify_mode.3 SSL_get_verify_callback.3 \
-        SSL_CTX_get_verify_mode.3 SSL_get_verify_depth.3 \
-        SSL_CTX_get_verify_mode.3 SSL_get_verify_mode.3 \
-        SSL_CTX_sess_number.3 SSL_CTX_sess_accept.3 \
-        SSL_CTX_sess_number.3 SSL_CTX_sess_accept_good.3 \
-        SSL_CTX_sess_number.3 SSL_CTX_sess_accept_renegotiate.3 \
-        SSL_CTX_sess_number.3 SSL_CTX_sess_cache_full.3 \
-        SSL_CTX_sess_number.3 SSL_CTX_sess_cb_hits.3 \
-        SSL_CTX_sess_number.3 SSL_CTX_sess_connect.3 \
-        SSL_CTX_sess_number.3 SSL_CTX_sess_connect_good.3 \
-        SSL_CTX_sess_number.3 SSL_CTX_sess_connect_renegotiate.3 \
-        SSL_CTX_sess_number.3 SSL_CTX_sess_hits.3 \
-        SSL_CTX_sess_number.3 SSL_CTX_sess_misses.3 \
-        SSL_CTX_sess_number.3 SSL_CTX_sess_timeouts.3 \
-        SSL_CTX_sess_set_cache_size.3 SSL_CTX_sess_get_cache_size.3 \
-        SSL_CTX_sess_set_get_cb.3 SSL_CTX_sess_get_get_cb.3 \
-        SSL_CTX_sess_set_get_cb.3 SSL_CTX_sess_get_new_cb.3 \
-        SSL_CTX_sess_set_get_cb.3 SSL_CTX_sess_get_remove_cb.3 \
-        SSL_CTX_sess_set_get_cb.3 SSL_CTX_sess_set_new_cb.3 \
-        SSL_CTX_sess_set_get_cb.3 SSL_CTX_sess_set_remove.3 \
-        SSL_CTX_set_cert_store.3 SSL_CTX_get_cert_store.3 \
-        SSL_CTX_set_cipher_list.3 SSL_set_cipher_list.3 \
-        SSL_CTX_set_client_CA_list.3 SSL_CTX_add_client_CA.3 \
-        SSL_CTX_set_client_CA_list.3 SSL_add_client_CA.3 \
-        SSL_CTX_set_client_CA_list.3 SSL_set_client_CA_list.3 \
-        SSL_CTX_set_default_passwd_cb.3 \
-        SSL_CTX_set_default_passwd_cb_userdata.3 \
-        SSL_CTX_set_max_cert_list.3 SSL_CTX_get_max_cert_list.3 \
-        SSL_CTX_set_max_cert_list.3 SSL_get_max_cert_list.3 \
-        SSL_CTX_set_max_cert_list.3 SSL_set_max_cert_list.3 \
-        SSL_CTX_set_mode.3 SSL_CTX_get_mode.3 \
-        SSL_CTX_set_mode.3 SSL_get_mode.3 \
-        SSL_CTX_set_mode.3 SSL_set_mode.3 \
-        SSL_CTX_set_msg_callback.3 SSL_CTX_set_msg_callback_arg.3 \
-        SSL_CTX_set_msg_callback.3 SSL_set_msg_callback.3 \
-        SSL_CTX_set_msg_callback.3 SSL_set_msg_callback_arg.3 \
-        SSL_CTX_set_options.3 SSL_CTX_get_options.3 \
-        SSL_CTX_set_options.3 SSL_get_options.3 \
-        SSL_CTX_set_options.3 SSL_set_options.3 \
-        SSL_CTX_set_quiet_shutdown.3 SSL_CTX_get_quiet_shutdown.3 \
-        SSL_CTX_set_quiet_shutdown.3 SSL_get_quiet_shutdown.3 \
-        SSL_CTX_set_quiet_shutdown.3 SSL_set_quiet_shutdown.3 \
-        SSL_CTX_set_session_cache_mode.3 SSL_CTX_get_session_cache_mode.3 \
-        SSL_CTX_set_session_id_context.3 SSL_set_session_id_context.3 \
-        SSL_CTX_set_ssl_version.3 SSL_get_ssl_method.3 \
-        SSL_CTX_set_ssl_version.3 SSL_set_ssl_method.3 \
-        SSL_CTX_set_timeout.3 SSL_CTX_get_timeout.3 \
-        SSL_CTX_set_tmp_dh_callback.3 SSL_CTX_set_tmp_dh.3 \
-        SSL_CTX_set_tmp_dh_callback.3 SSL_set_tmp_dh.3 \
-        SSL_CTX_set_tmp_dh_callback.3 SSL_set_tmp_dh_callback.3 \
-        SSL_CTX_set_tmp_rsa_callback.3 SSL_CTX_need_tmp_rsa.3 \
-        SSL_CTX_set_tmp_rsa_callback.3 SSL_CTX_set_tmp_rsa.3 \
-        SSL_CTX_set_tmp_rsa_callback.3 SSL_need_tmp_rsa.3 \
-        SSL_CTX_set_tmp_rsa_callback.3 SSL_set_tmp_rsa.3 \
-        SSL_CTX_set_tmp_rsa_callback.3 SSL_set_tmp_rsa_callback.3 \
-        SSL_CTX_set_verify.3 SSL_CTX_set_verify_depth.3 \
-        SSL_CTX_set_verify.3 SSL_set_verify.3 \
-        SSL_CTX_set_verify.3 SSL_set_verify_depth.3 \
-        SSL_CTX_use_certificate.3 SSL_CTX_check_private_key.3 \
-        SSL_CTX_use_certificate.3 SSL_CTX_use_PrivateKey.3 \
-        SSL_CTX_use_certificate.3 SSL_CTX_use_PrivateKey_ASN1.3 \
-        SSL_CTX_use_certificate.3 SSL_CTX_use_PrivateKey_file.3 \
-        SSL_CTX_use_certificate.3 SSL_CTX_use_RSAPrivateKey.3 \
-        SSL_CTX_use_certificate.3 SSL_CTX_use_RSAPrivateKey_ASN1.3 \
-        SSL_CTX_use_certificate.3 SSL_CTX_use_RSAPrivateKey_file.3 \
-        SSL_CTX_use_certificate.3 SSL_CTX_use_certificate_ASN1.3 \
-        SSL_CTX_use_certificate.3 SSL_CTX_use_certificate_chain_file.3 \
-        SSL_CTX_use_certificate.3 SSL_CTX_use_certificate_file.3 \
-        SSL_CTX_use_certificate.3 SSL_check_private_key.3 \
-        SSL_CTX_use_certificate.3 SSL_use_PrivateKey.3 \
-        SSL_CTX_use_certificate.3 SSL_use_PrivateKey_ASN1.3 \
-        SSL_CTX_use_certificate.3 SSL_use_PrivateKey_file.3 \
-        SSL_CTX_use_certificate.3 SSL_use_RSAPrivateKey.3 \
-        SSL_CTX_use_certificate.3 SSL_use_RSAPrivateKey_ASN1.3 \
-        SSL_CTX_use_certificate.3 SSL_use_RSAPrivateKey_file.3 \
-        SSL_CTX_use_certificate.3 SSL_use_certificate.3 \
-        SSL_CTX_use_certificate.3 SSL_use_certificate_ASN1.3 \
-        SSL_CTX_use_certificate.3 SSL_use_certificate_file.3 \
-        SSL_SESSION_get_ex_new_index.3 SSL_SESSION_get_ex_data.3 \
-        SSL_SESSION_get_ex_new_index.3 SSL_SESSION_set_ex_data.3 \
-        SSL_SESSION_get_time.3 SSL_SESSION_get_timeout.3 \
-        SSL_SESSION_get_time.3 SSL_SESSION_set_time.3 \
-        SSL_SESSION_get_time.3 SSL_SESSION_set_timeout.3 \
-        SSL_SESSION_get_time.3 SSL_get_time.3 \
-        SSL_SESSION_get_time.3 SSL_get_timeout.3 \
-        SSL_SESSION_get_time.3 SSL_set_time.3 \
-        SSL_SESSION_get_time.3 SSL_set_timeout.3 \
-        SSL_alert_type_string.3 SSL_alert_desc_string.3 \
-        SSL_alert_type_string.3 SSL_alert_desc_string_long.3 \
-        SSL_alert_type_string.3 SSL_alert_type_string_long.3 \
-        SSL_get_ciphers.3 SSL_get_cipher_list.3 \
-        SSL_get_client_CA_list.3 SSL_CTX_get_client_CA_list.3 \
-        SSL_get_current_cipher.3 SSL_get_cipher.3 \
-        SSL_get_current_cipher.3 SSL_get_cipher_bits.3 \
-        SSL_get_current_cipher.3 SSL_get_cipher_name.3 \
-        SSL_get_current_cipher.3 SSL_get_cipher_version.3 \
-        SSL_get_ex_new_index.3 SSL_get_ex_data.3 \
-        SSL_get_ex_new_index.3 SSL_set_ex_data.3 \
-        SSL_get_fd.3 SSL_get_rfd.3 \
-        SSL_get_fd.3 SSL_get_wfd.3 \
-        SSL_get_rbio.3 SSL_get_wbio.3 \
-        SSL_get_session.3 SSL_get0_session.3 \
-        SSL_get_session.3 SSL_get1_session.3 \
-        SSL_library_init.3 OpenSSL_add_ssl_algorithms.3 \
-        SSL_library_init.3 SSLeay_add_ssl_algorithms.3 \
-        SSL_rstate_string.3 SSL_rstate_string_long.3 \
-        SSL_set_connect_state.3 SSL_set_accept_state.3 \
-        SSL_set_fd.3 SSL_set_rfd.3 \
-        SSL_set_fd.3 SSL_set_wfd.3 \
-        SSL_set_shutdown.3 SSL_get_shutdown.3 \
-        SSL_state_string.3 SSL_state_string_long.3 \
-        SSL_want.3 SSL_want_nothing.3 \
-        SSL_want.3 SSL_want_read.3 \
-        SSL_want.3 SSL_want_write.3 \
-        SSL_want.3 SSL_want_x509_lookup.3 \
-        blowfish.3 BF_cbc.3 \
-        blowfish.3 BF_cbc_encrypt.3 \
-        blowfish.3 BF_cfb64_encrypt.3 \
-        blowfish.3 BF_decrypt.3 \
-        blowfish.3 BF_ecb.3 \
-        blowfish.3 BF_ecb_encrypt.3 \
-        blowfish.3 BF_encrypt.3 \
-        blowfish.3 BF_ofb64_encrypt.3 \
-        blowfish.3 BF_options.3 \
-        blowfish.3 BF_set_key.3 \
-        bn_internal.3 bn_add_words.3 \
-        bn_internal.3 bn_check_top.3 \
-        bn_internal.3 bn_cmp_words.3 \
-        bn_internal.3 bn_div_words.3 \
-        bn_internal.3 bn_dump.3 \
-        bn_internal.3 bn_expand.3 \
-        bn_internal.3 bn_expand2.3 \
-        bn_internal.3 bn_fix_top.3 \
-        bn_internal.3 bn_mul_add_words.3 \
-        bn_internal.3 bn_mul_comba4.3 \
-        bn_internal.3 bn_mul_comba8.3 \
-        bn_internal.3 bn_mul_high.3 \
-        bn_internal.3 bn_mul_low_normal.3 \
-        bn_internal.3 bn_mul_low_recursive.3 \
-        bn_internal.3 bn_mul_normal.3 \
-        bn_internal.3 bn_mul_part_recursive.3 \
-        bn_internal.3 bn_mul_recursive.3 \
-        bn_internal.3 bn_mul_words.3 \
-        bn_internal.3 bn_print.3 \
-        bn_internal.3 bn_set_high.3 \
-        bn_internal.3 bn_set_low.3 \
-        bn_internal.3 bn_set_max.3 \
-        bn_internal.3 bn_sqr_comba4.3 \
-        bn_internal.3 bn_sqr_comba8.3 \
-        bn_internal.3 bn_sqr_normal.3 \
-        bn_internal.3 bn_sqr_recursive.3 \
-        bn_internal.3 bn_sqr_words.3 \
-        bn_internal.3 bn_sub_words.3 \
-        bn_internal.3 bn_wexpand.3 \
-        bn_internal.3 mul.3 \
-        bn_internal.3 mul_add.3 \
-        bn_internal.3 sqr.3 \
-        d2i_DHparams.3 i2d_DHparams.3 \
-        d2i_RSAPublicKey.3 d2i_Netscape_RSA.3 \
-        d2i_RSAPublicKey.3 d2i_RSAPrivateKey.3 \
-        d2i_RSAPublicKey.3 i2d_Netscape_RSA.3 \
-        d2i_RSAPublicKey.3 i2d_RSAPrivateKey.3 \
-        d2i_RSAPublicKey.3 i2d_RSAPublicKey.3 \
-        d2i_SSL_SESSION.3 i2d_SSL_SESSION.3 \
-        des_crypt.3 des_string_to_2keys.3 \
-        des_random_key.3 des_cbc_cksum.3 \
-        des_random_key.3 des_cfb64_encrypt.3 \
-        des_random_key.3 des_cfb_encrypt.3 \
-        des_random_key.3 des_crypt.3 \
-        des_random_key.3 des_ecb2_encrypt.3 \
-        des_random_key.3 des_ecb3_encrypt.3 \
-        des_random_key.3 des_ecb_encrypt.3 \
-        des_random_key.3 des_ede2_cbc_encrypt.3 \
-        des_random_key.3 des_ede2_cfb64_encrypt.3 \
-        des_random_key.3 des_ede2_ofb64_encrypt.3 \
-        des_random_key.3 des_ede3_cbc_encrypt.3 \
-        des_random_key.3 des_ede3_cbcm_encrypt.3 \
-        des_random_key.3 des_ede3_cfb64_encrypt.3 \
-        des_random_key.3 des_ede3_ofb64_encrypt.3 \
-        des_random_key.3 des_enc_read.3 \
-        des_random_key.3 des_enc_write.3 \
-        des_random_key.3 des_fcrypt.3 \
-        des_random_key.3 des_is_weak_key.3 \
-        des_random_key.3 des_key_sched.3 \
-        des_random_key.3 des_ncbc_encrypt.3 \
-        des_random_key.3 des_ofb64_encrypt.3 \
-        des_random_key.3 des_ofb_encrypt.3 \
-        des_random_key.3 des_pcbc_encrypt.3 \
-        des_random_key.3 des_quad_cksum.3 \
-        des_random_key.3 des_read_2passwords.3 \
-        des_random_key.3 des_read_password.3 \
-        des_random_key.3 des_read_pw_string.3 \
-        des_random_key.3 des_set_key.3 \
-        des_random_key.3 des_set_key_checked.3 \
-        des_random_key.3 des_set_key_unchecked.3 \
-        des_random_key.3 des_set_odd_parity.3 \
-        des_random_key.3 des_string_to_2keys.3 \
-        des_random_key.3 des_string_to_key.3 \
-        des_random_key.3 des_xcbc_encrypt.3 \
-        dsa.3 DSA_OpenSSL.3 \
-        dsa.3 DSA_SIG_free.3 \
-        dsa.3 DSA_do_verify.3 \
-        dsa.3 DSA_free.3 \
-        dsa.3 DSA_get_default_method.3 \
-        dsa.3 DSA_get_ex_data.3 \
-        dsa.3 DSA_new_method.3 \
-        dsa.3 DSA_set_default_method.3 \
-        dsa.3 DSA_set_ex_data.3 \
-        dsa.3 DSA_sign_setup.3 \
-        dsa.3 DSA_verify.3 \
-        dsa.3 d2i_DSAPrivateKey.3 \
-        dsa.3 d2i_DSAPublicKey.3 \
-        dsa.3 d2i_DSA_SIG.3 \
-        dsa.3 d2i_DSAparams.3 \
-        dsa.3 i2d_DSAPrivateKey.3 \
-        dsa.3 i2d_DSAPublicKey.3 \
-        dsa.3 i2d_DSA_SIG.3 \
-        dsa.3 i2d_DSAparams.3 \
-        lh_stats.3 lh_node_stats.3 \
-        lh_stats.3 lh_node_stats_bio.3 \
-        lh_stats.3 lh_node_usage_stats.3 \
-        lh_stats.3 lh_node_usage_stats_bio.3 \
-        lh_stats.3 lh_stats_bio.3 \
-        lhash.3 lh_delete.3 \
-        lhash.3 lh_doall.3 \
-        lhash.3 lh_doall_arg.3 \
-        lhash.3 lh_error.3 \
-        lhash.3 lh_free.3 \
-        lhash.3 lh_insert.3 \
-        lhash.3 lh_new.3 \
-        lhash.3 lh_retrieve.3
-.include <bsd.man.mk>
-.else
-maninstall:
-.endif
-# XXX .PATH order is critical because of non-unique filenames
-.PATH: ${.CURDIR}/src/doc/crypto ${.CURDIR}/src/doc/ssl ${.CURDIR}/src/doc/apps
-.SUFFIXES: .pod
-.pod.cat3:
-        ( cd `dirname ${.ALLSRC}` && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          `basename ${.ALLSRC}` ) | nroff -Tascii -man > ${.TARGET}
-.pod.cat7:
-        ( cd `dirname ${.ALLSRC}` && pod2man --section=7 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          `basename ${.ALLSRC}` ) | nroff -Tascii -man > ${.TARGET}
-.pod.cat1:
-        ( cd `dirname ${.ALLSRC}` && pod2man --section=1 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          `basename ${.ALLSRC}` ) | nroff -Tascii -man > ${.TARGET}
-.pod.ps3:
-        ( cd `dirname ${.ALLSRC}` && pod2man --section=3 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          `basename ${.ALLSRC}` ) | nroff -Tps -man > ${.TARGET}
-.pod.ps7:
-        ( cd `dirname ${.ALLSRC}` && pod2man --section=7 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          `basename ${.ALLSRC}` ) | nroff -Tps -man > ${.TARGET}
-.pod.ps1:
-        ( cd `dirname ${.ALLSRC}` && pod2man --section=1 --official \
-          --center='OpenSSL' --release="OpenBSD `uname -r`" \
-          `basename ${.ALLSRC}` ) | nroff -Tps -man > ${.TARGET}
-all:    prereq ${MANALL} ${PSALL}
-# egcs bombs optimising this file on vax
-.if (${MACHINE_ARCH} == "vax")
-        cd ${.OBJDIR}/crypto && CFLAGS=-O0 ${MAKE} a_strnid.o a_strnid.po
-        cd ${.OBJDIR}/crypto && CFLAGS=-O1 ${MAKE} des_enc.o des_enc.po
-.endif
-        @cd ${.OBJDIR}/crypto && ${MAKE}
-        @cd ${.OBJDIR}/ssl && ${MAKE}
-includes: prereq
-        @cd ${.OBJDIR}/crypto && ${MAKE} includes
-        @cd ${.OBJDIR}/ssl && ${MAKE} includes
-prereq: ${.OBJDIR}/${SSL_SRC}/Makefile.ssl ${.OBJDIR}/${SSL_SRC}/crypto/objects/obj_dat.h ${.OBJDIR}/${SSL_SRC}/crypto/objects/obj_mac.h
-install: maninstall
-        @cd ${.OBJDIR}/crypto && ${MAKE} install
-        @cd ${.OBJDIR}/ssl && ${MAKE} install
-${.OBJDIR}/${SSL_SRC}/crypto/objects/obj_dat.h: ${.OBJDIR}/${SSL_SRC}/crypto/objects/obj_mac.h
-        /usr/bin/perl ${.OBJDIR}/${SSL_SRC}/crypto/objects/obj_dat.pl ${.OBJDIR}/${SSL_SRC}/crypto/objects/obj_mac.h ${.OBJDIR}/${SSL_SRC}/crypto/objects/obj_dat.h
-${.OBJDIR}/${SSL_SRC}/crypto/objects/obj_mac.h: ${.OBJDIR}/${SSL_SRC}/crypto/objects/objects.h
-        /usr/bin/perl ${.OBJDIR}/${SSL_SRC}/crypto/objects/objects.pl ${.OBJDIR}/${SSL_SRC}/crypto/objects/objects.txt ${.OBJDIR}/${SSL_SRC}/crypto/objects/obj_mac.num ${.OBJDIR}/${SSL_SRC}/crypto/objects/obj_mac.h
-${.OBJDIR}/${SSL_SRC}/Makefile.ssl : ${.OBJDIR}/${SSL_SRC}/Makefile.org
-        @cd ${.OBJDIR}/${SSL_SRC} && /usr/bin/perl Configure ${SSLCONF}
-.if !exists(${.OBJDIR}/${SSL_SRC}/Makefile.org)
-${.OBJDIR}/${SSL_SRC}/Makefile.org: ${.CURDIR}/${SSL_SRC}/Makefile.org
-        @${LNDIR} -s -e obj -e obj.${MACHINE_ARCH} ${.CURDIR}
-.endif
-.if ${.OBJDIR} == ${.CURDIR}
-clean:
-        @cd ${.OBJDIR}/crypto && ${MAKE} clean
-        @cd ${.OBJDIR}/ssl && ${MAKE} clean
-        @rm -f ${MUNGEDFILES}
-        @rm -rf ${.OBJDIR}/${SSL_SRC}/include
-.else   
-clean:
-        @cd ${.OBJDIR} && find . \! -type d -print | xargs rm
-.endif
-cleandir: clean
-test:
-        # Nothing here so far...
-depend: prereq
-        # Nothing here so far...
-lint:
-        # Nothing here so far...
-tags:
-        # Nothing here so far...
 distribution:
        ${INSTALL} ${INSTALL_COPY} -g ${BINGRP} -m 444 \
@@ -1048,5 +8,4 @@ distribution:
        ${INSTALL} ${INSTALL_COPY} -g ${BINGRP} -m 444 \
           ${.CURDIR}/x509v3.cnf ${DESTDIR}/etc/ssl/x509v3.cnf
-.include <bsd.obj.mk>
 .include <bsd.subdir.mk>
diff --git a/src/lib/libssl/crypto/Makefile b/src/lib/libssl/crypto/Makefile
index a98e51e477..15c310f2ee 100644
--- a/src/lib/libssl/crypto/Makefile
+++ b/src/lib/libssl/crypto/Makefile
@@ -1,10 +1,10 @@
+# $OpenBSD: Makefile,v 1.25 2002/09/03 18:59:55 markus Exp $
 LIB=    crypto
-SSLEAYDIST= src
+SSLEAYDIST=     src
+SSL_SRC=        ${.CURDIR}/../${SSLEAYDIST}
-LCRYPTO_SRC= ${.CURDIR}/../${SSLEAYDIST}/crypto
+LCRYPTO_SRC=    ${SSL_SRC}/crypto
-LCRYPTO_INC= ${.CURDIR}/../${SSLEAYDIST}/include
 .if ${MACHINE_ARCH} == "i386"
 CFLAGS+= -DL_ENDIAN
@@ -33,7 +33,6 @@ CFLAGS+= -DOPENSSL_NO_HW_SUREWARE
 CFLAGS+= -I${.CURDIR}/../${SSLEAYDIST}
 CFLAGS+= -I${LCRYPTO_SRC}
 SRCS+= o_time.c
-CFLAGS+= -I${LCRYPTO_INC}
 SRCS+=  cryptlib.c ex_data.c cpt_err.c mem.c mem_dbg.c tmdiff.c cversion.c uid.c
 CFLAGS+= -I${LCRYPTO_SRC}/md2
 SRCS+=  md2_dgst.c md2_one.c                                    
@@ -177,17 +176,6 @@ CFLAGS+= -I${LCRYPTO_SRC}/ec
 SRCS+= ec_cvt.c ec_lib.c ecp_mont.c ecp_recp.c
 SRCS+= ec_err.c ec_mult.c ecp_nist.c ecp_smpl.c
-HDRS=   asn1.h asn1_mac.h bio.h blowfish.h bn.h buffer.h cast.h \
-        comp.h conf.h conf_api.h crypto.h des.h dh.h dsa.h dso.h \
-        e_os2.h ebcdic.h engine.h err.h evp.h hmac.h idea.h lhash.h \
-        md2.h md4.h md5.h mdc2.h obj_mac.h objects.h opensslconf.h \
-        opensslv.h pem.h pem2.h pkcs12.h pkcs7.h rand.h rc2.h rc4.h \
-        rc5.h ripemd.h rsa.h safestack.h sha.h \
-        stack.h symhacks.h tmdiff.h txt_db.h x509.h \
-        x509_vfy.h x509v3.h asn1t.h des_old.h ossl_typ.h \
-        ui.h ui_compat.h aes.h ec.h ocsp.h
 .PATH:  ${LCRYPTO_SRC}/md2 ${LCRYPTO_SRC}/md5 ${LCRYPTO_SRC}/sha \
        ${LCRYPTO_SRC}/mdc2 ${LCRYPTO_SRC}/hmac ${LCRYPTO_SRC}/ripemd \
        ${LCRYPTO_SRC}/des ${LCRYPTO_SRC}/rc2 ${LCRYPTO_SRC}/rc4 \
@@ -203,13 +191,85 @@ HDRS=	asn1.h asn1_mac.h bio.h blowfish.h bn.h buffer.h cast.h \
        ${LCRYPTO_SRC}/engine ${LCRYPTO_SRC}/dso ${LCRYPTO_SRC}/ui \
        ${LCRYPTO_SRC}/ocsp ${LCRYPTO_SRC}/ec ${LCRYPTO_SRC}/aes ${LCRYPTO_SRC}
-includes:
+HDRS=\
+        crypto/aes/aes.h \
+        crypto/asn1/asn1.h \
+        crypto/asn1/asn1_mac.h \
+        crypto/asn1/asn1t.h \
+        crypto/bf/blowfish.h \
+        crypto/bio/bio.h \
+        crypto/bn/bn.h \
+        crypto/buffer/buffer.h \
+        crypto/cast/cast.h \
+        crypto/comp/comp.h \
+        crypto/conf/conf.h \
+        crypto/conf/conf_api.h \
+        crypto/crypto.h \
+        crypto/des/des.h \
+        crypto/des/des_old.h \
+        crypto/dh/dh.h \
+        crypto/dsa/dsa.h \
+        crypto/dso/dso.h \
+        crypto/ebcdic.h \
+        crypto/ec/ec.h \
+        crypto/engine/engine.h \
+        crypto/err/err.h \
+        crypto/evp/evp.h \
+        crypto/hmac/hmac.h \
+        crypto/idea/idea.h \
+        crypto/lhash/lhash.h \
+        crypto/md2/md2.h \
+        crypto/md4/md4.h \
+        crypto/md5/md5.h \
+        crypto/mdc2/mdc2.h \
+        crypto/objects/objects.h \
+        crypto/ocsp/ocsp.h \
+        crypto/opensslv.h \
+        crypto/ossl_typ.h \
+        crypto/pem/pem.h \
+        crypto/pem/pem2.h \
+        crypto/pkcs12/pkcs12.h \
+        crypto/pkcs7/pkcs7.h \
+        crypto/rand/rand.h \
+        crypto/rc2/rc2.h \
+        crypto/rc4/rc4.h \
+        crypto/rc5/rc5.h \
+        crypto/ripemd/ripemd.h \
+        crypto/rsa/rsa.h \
+        crypto/sha/sha.h \
+        crypto/stack/safestack.h \
+        crypto/stack/stack.h \
+        crypto/symhacks.h \
+        crypto/tmdiff.h \
+        crypto/txt_db/txt_db.h \
+        crypto/ui/ui.h \
+        crypto/ui/ui_compat.h \
+        crypto/x509/x509.h \
+        crypto/x509/x509_vfy.h \
+        crypto/x509v3/x509v3.h \
+        e_os2.h
+HDRS_GEN=\
+        ${.CURDIR}/arch/${MACHINE_ARCH}/opensslconf.h \
+        ${.OBJDIR}/obj_mac.h
+includes: obj_mac.h
        @test -d ${DESTDIR}/usr/include/ssl || mkdir ${DESTDIR}/usr/include/ssl
        @d=`mktemp -d /tmp/libsslXXXXXXXXXX`; \
-        cd ${LCRYPTO_INC}/openssl; for i in $(HDRS); do \
+        for i in $(HDRS); do \
+                f=`basename $$i`; \
+                j="sed 's/<openssl/<ssl/' \
+                       ${SSL_SRC}/$$i >$$d/$$f && \
+                (cmp -s $$d/$$f ${DESTDIR}/usr/include/ssl/$$f || \
+                ${INSTALL} ${INSTALL_COPY} -o ${BINOWN} -g ${BINGRP} -m 444 \
+                           $$d/$$f ${DESTDIR}/usr/include/ssl)"; \
+                echo $$j; \
+                eval "$$j"; \
+        done; \
+        for i in $(HDRS_GEN); do \
                f=`basename $$i`; \
                j="sed 's/<openssl/<ssl/' \
-                       ${LCRYPTO_INC}/openssl/$$i >$$d/$$f && \
+                       $$i >$$d/$$f && \
                (cmp -s $$d/$$f ${DESTDIR}/usr/include/ssl/$$f || \
                ${INSTALL} ${INSTALL_COPY} -o ${BINOWN} -g ${BINGRP} -m 444 \
                           $$d/$$f ${DESTDIR}/usr/include/ssl)"; \
@@ -218,4 +278,30 @@ includes:
        done; \
        rm -rf $$d
+# generated
+CFLAGS+= -I${.OBJDIR}
+GENERATED=obj_mac.h obj_dat.h
+CLEANFILES=${GENERATED}
+SSL_OBJECTS=${SSL_SRC}/crypto/objects
+obj_mac.h: ${SSL_OBJECTS}/objects.h
+        /usr/bin/perl ${SSL_OBJECTS}/objects.pl ${SSL_OBJECTS}/objects.txt ${SSL_OBJECTS}/obj_mac.num obj_mac.h
+obj_dat.h: obj_mac.h
+        /usr/bin/perl ${SSL_OBJECTS}/obj_dat.pl obj_mac.h obj_dat.h
+.if (${MACHINE_ARCH} == "vax")
+# egcs bombs optimising this file on vax
+a_strnid.o:
+        ${CC} ${CFLAGS} -O0 ${CPPFLAGS} -c ${.IMPSRC}
+a_strnid.po:           
+        ${CC} ${CFLAGS} -O0 ${CPPFLAGS} -c ${.IMPSRC} -o $@
+des_enc.o:             
+        ${CC} ${CFLAGS} -O1 ${CPPFLAGS} -c ${.IMPSRC}
+des_enc.po:            
+        ${CC} ${CFLAGS} -O1 ${CPPFLAGS} -c ${.IMPSRC} -o $@
+.endif  
+all beforedepend: ${GENERATED}
 .include <bsd.lib.mk>
diff --git a/src/lib/libssl/crypto/arch/alpha/opensslconf.h b/src/lib/libssl/crypto/arch/alpha/opensslconf.h
new file mode 100644
index 0000000000..c33ccc8a0f
--- /dev/null
+++ b/src/lib/libssl/crypto/arch/alpha/opensslconf.h
@@ -0,0 +1,180 @@
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_DOING_MAKEDEPEND
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+#endif
+/* crypto/opensslconf.h.in */
+/* Generate 80386 code? */
+#undef I386_ONLY
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define OPENSSLDIR "/etc/ssl"
+#endif
+#endif
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#undef RC4_CHUNK
+#endif
+#endif
+#if (defined(HEADER_DES_H) || defined(HEADER_DES_OLD_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned int
+#endif
+#endif
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#undef BN_LLONG
+/* Should we define BN_DIV2W here? */
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#define SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#undef THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#undef RC4_INDEX
+#endif
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#undef BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#define DES_PTR
+#endif
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#undef DES_RISC1
+#endif
+#ifndef DES_RISC2
+#define DES_RISC2
+#endif
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#undef DES_UNROLL
+#endif
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )              /* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )       /* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )       /* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )          /* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )         /* HP-PA */
+  /* Unknown */
+#elif defined( __aux )          /* 68K */
+  /* Unknown */
+#elif defined( __dgux )         /* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )          /* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)        /* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
diff --git a/src/lib/libssl/crypto/arch/hppa/opensslconf.h b/src/lib/libssl/crypto/arch/hppa/opensslconf.h
new file mode 100644
index 0000000000..0334dbdfc6
--- /dev/null
+++ b/src/lib/libssl/crypto/arch/hppa/opensslconf.h
@@ -0,0 +1,180 @@
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_DOING_MAKEDEPEND
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+#endif
+/* crypto/opensslconf.h.in */
+/* Generate 80386 code? */
+#undef I386_ONLY
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define OPENSSLDIR "/etc/ssl"
+#endif
+#endif
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#undef RC4_CHUNK
+#endif
+#endif
+#if (defined(HEADER_DES_H) || defined(HEADER_DES_OLD_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned long
+#endif
+#endif
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#define BN_LLONG
+/* Should we define BN_DIV2W here? */
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#undef SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#define THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#define RC4_INDEX
+#endif
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#undef BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#undef DES_PTR
+#endif
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#undef DES_RISC1
+#endif
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#define DES_UNROLL
+#endif
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )              /* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )       /* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )       /* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )          /* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )         /* HP-PA */
+  /* Unknown */
+#elif defined( __aux )          /* 68K */
+  /* Unknown */
+#elif defined( __dgux )         /* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )          /* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)        /* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
diff --git a/src/lib/libssl/crypto/arch/i386/opensslconf.h b/src/lib/libssl/crypto/arch/i386/opensslconf.h
new file mode 100644
index 0000000000..7361ac56a1
--- /dev/null
+++ b/src/lib/libssl/crypto/arch/i386/opensslconf.h
@@ -0,0 +1,180 @@
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_DOING_MAKEDEPEND
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+#endif
+/* crypto/opensslconf.h.in */
+/* Generate 80386 code? */
+#undef I386_ONLY
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define OPENSSLDIR "/etc/ssl"
+#endif
+#endif
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#undef RC4_CHUNK
+#endif
+#endif
+#if (defined(HEADER_DES_H) || defined(HEADER_DES_OLD_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned long
+#endif
+#endif
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#define BN_LLONG
+/* Should we define BN_DIV2W here? */
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#undef SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#define THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#define RC4_INDEX
+#endif
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#undef BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#define DES_PTR
+#endif
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#define DES_RISC1
+#endif
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#define DES_UNROLL
+#endif
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )              /* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )       /* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )       /* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )          /* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )         /* HP-PA */
+  /* Unknown */
+#elif defined( __aux )          /* 68K */
+  /* Unknown */
+#elif defined( __dgux )         /* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )          /* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)        /* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
diff --git a/src/lib/libssl/crypto/arch/m68k/opensslconf.h b/src/lib/libssl/crypto/arch/m68k/opensslconf.h
new file mode 100644
index 0000000000..47a6dd8596
--- /dev/null
+++ b/src/lib/libssl/crypto/arch/m68k/opensslconf.h
@@ -0,0 +1,180 @@
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_DOING_MAKEDEPEND
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+#endif
+/* crypto/opensslconf.h.in */
+/* Generate 80386 code? */
+#undef I386_ONLY
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define OPENSSLDIR "/etc/ssl"
+#endif
+#endif
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#undef RC4_CHUNK
+#endif
+#endif
+#if (defined(HEADER_DES_H) || defined(HEADER_DES_OLD_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned int
+#endif
+#endif
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#define BN_LLONG
+/* Should we define BN_DIV2W here? */
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#undef SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#define THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#define RC4_INDEX
+#endif
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#undef BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#undef DES_PTR
+#endif
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#undef DES_RISC1
+#endif
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#define DES_UNROLL
+#endif
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )              /* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )       /* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )       /* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )          /* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )         /* HP-PA */
+  /* Unknown */
+#elif defined( __aux )          /* 68K */
+  /* Unknown */
+#elif defined( __dgux )         /* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )          /* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)        /* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
diff --git a/src/lib/libssl/crypto/arch/m88k/opensslconf.h b/src/lib/libssl/crypto/arch/m88k/opensslconf.h
new file mode 100644
index 0000000000..47a6dd8596
--- /dev/null
+++ b/src/lib/libssl/crypto/arch/m88k/opensslconf.h
@@ -0,0 +1,180 @@
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_DOING_MAKEDEPEND
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+#endif
+/* crypto/opensslconf.h.in */
+/* Generate 80386 code? */
+#undef I386_ONLY
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define OPENSSLDIR "/etc/ssl"
+#endif
+#endif
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#undef RC4_CHUNK
+#endif
+#endif
+#if (defined(HEADER_DES_H) || defined(HEADER_DES_OLD_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned int
+#endif
+#endif
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#define BN_LLONG
+/* Should we define BN_DIV2W here? */
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#undef SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#define THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#define RC4_INDEX
+#endif
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#undef BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#undef DES_PTR
+#endif
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#undef DES_RISC1
+#endif
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#define DES_UNROLL
+#endif
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )              /* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )       /* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )       /* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )          /* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )         /* HP-PA */
+  /* Unknown */
+#elif defined( __aux )          /* 68K */
+  /* Unknown */
+#elif defined( __dgux )         /* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )          /* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)        /* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
diff --git a/src/lib/libssl/crypto/arch/mips/opensslconf.h b/src/lib/libssl/crypto/arch/mips/opensslconf.h
new file mode 100644
index 0000000000..2b030ba088
--- /dev/null
+++ b/src/lib/libssl/crypto/arch/mips/opensslconf.h
@@ -0,0 +1,180 @@
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_DOING_MAKEDEPEND
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+#endif
+/* crypto/opensslconf.h.in */
+/* Generate 80386 code? */
+#undef I386_ONLY
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define OPENSSLDIR "/etc/ssl"
+#endif
+#endif
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#undef RC4_CHUNK
+#endif
+#endif
+#if (defined(HEADER_DES_H) || defined(HEADER_DES_OLD_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned int
+#endif
+#endif
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#define BN_LLONG
+/* Should we define BN_DIV2W here? */
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#undef SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#define THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#define RC4_INDEX
+#endif
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#undef BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#undef DES_PTR
+#endif
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#undef DES_RISC1
+#endif
+#ifndef DES_RISC2
+#define DES_RISC2
+#endif
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#define DES_UNROLL
+#endif
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )              /* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )       /* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )       /* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )          /* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )         /* HP-PA */
+  /* Unknown */
+#elif defined( __aux )          /* 68K */
+  /* Unknown */
+#elif defined( __dgux )         /* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )          /* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)        /* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
diff --git a/src/lib/libssl/crypto/arch/powerpc/opensslconf.h b/src/lib/libssl/crypto/arch/powerpc/opensslconf.h
new file mode 100644
index 0000000000..47a6dd8596
--- /dev/null
+++ b/src/lib/libssl/crypto/arch/powerpc/opensslconf.h
@@ -0,0 +1,180 @@
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_DOING_MAKEDEPEND
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+#endif
+/* crypto/opensslconf.h.in */
+/* Generate 80386 code? */
+#undef I386_ONLY
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define OPENSSLDIR "/etc/ssl"
+#endif
+#endif
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#undef RC4_CHUNK
+#endif
+#endif
+#if (defined(HEADER_DES_H) || defined(HEADER_DES_OLD_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned int
+#endif
+#endif
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#define BN_LLONG
+/* Should we define BN_DIV2W here? */
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#undef SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#define THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#define RC4_INDEX
+#endif
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#undef BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#undef DES_PTR
+#endif
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#undef DES_RISC1
+#endif
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#define DES_UNROLL
+#endif
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )              /* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )       /* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )       /* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )          /* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )         /* HP-PA */
+  /* Unknown */
+#elif defined( __aux )          /* 68K */
+  /* Unknown */
+#elif defined( __dgux )         /* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )          /* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)        /* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
diff --git a/src/lib/libssl/crypto/arch/sparc/opensslconf.h b/src/lib/libssl/crypto/arch/sparc/opensslconf.h
new file mode 100644
index 0000000000..47a6dd8596
--- /dev/null
+++ b/src/lib/libssl/crypto/arch/sparc/opensslconf.h
@@ -0,0 +1,180 @@
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_DOING_MAKEDEPEND
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+#endif
+/* crypto/opensslconf.h.in */
+/* Generate 80386 code? */
+#undef I386_ONLY
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define OPENSSLDIR "/etc/ssl"
+#endif
+#endif
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#undef RC4_CHUNK
+#endif
+#endif
+#if (defined(HEADER_DES_H) || defined(HEADER_DES_OLD_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned int
+#endif
+#endif
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#define BN_LLONG
+/* Should we define BN_DIV2W here? */
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#undef SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#define THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#define RC4_INDEX
+#endif
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#undef BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#undef DES_PTR
+#endif
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#undef DES_RISC1
+#endif
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#define DES_UNROLL
+#endif
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )              /* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )       /* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )       /* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )          /* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )         /* HP-PA */
+  /* Unknown */
+#elif defined( __aux )          /* 68K */
+  /* Unknown */
+#elif defined( __dgux )         /* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )          /* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)        /* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
diff --git a/src/lib/libssl/crypto/arch/sparc64/opensslconf.h b/src/lib/libssl/crypto/arch/sparc64/opensslconf.h
new file mode 100644
index 0000000000..053308653b
--- /dev/null
+++ b/src/lib/libssl/crypto/arch/sparc64/opensslconf.h
@@ -0,0 +1,180 @@
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_DOING_MAKEDEPEND
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+#endif
+/* crypto/opensslconf.h.in */
+/* Generate 80386 code? */
+#undef I386_ONLY
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define OPENSSLDIR "/etc/ssl"
+#endif
+#endif
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#undef RC4_CHUNK
+#endif
+#endif
+#if (defined(HEADER_DES_H) || defined(HEADER_DES_OLD_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned int
+#endif
+#endif
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#undef BN_LLONG
+/* Should we define BN_DIV2W here? */
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#define SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#undef THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#undef RC4_INDEX
+#endif
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#define BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#define DES_PTR
+#endif
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#undef DES_RISC1
+#endif
+#ifndef DES_RISC2
+#define DES_RISC2
+#endif
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#undef DES_UNROLL
+#endif
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )              /* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )       /* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )       /* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )          /* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )         /* HP-PA */
+  /* Unknown */
+#elif defined( __aux )          /* 68K */
+  /* Unknown */
+#elif defined( __dgux )         /* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )          /* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)        /* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
diff --git a/src/lib/libssl/crypto/arch/vax/opensslconf.h b/src/lib/libssl/crypto/arch/vax/opensslconf.h
new file mode 100644
index 0000000000..47a6dd8596
--- /dev/null
+++ b/src/lib/libssl/crypto/arch/vax/opensslconf.h
@@ -0,0 +1,180 @@
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_DOING_MAKEDEPEND
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+#endif
+/* crypto/opensslconf.h.in */
+/* Generate 80386 code? */
+#undef I386_ONLY
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define OPENSSLDIR "/etc/ssl"
+#endif
+#endif
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#undef RC4_CHUNK
+#endif
+#endif
+#if (defined(HEADER_DES_H) || defined(HEADER_DES_OLD_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned int
+#endif
+#endif
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#define BN_LLONG
+/* Should we define BN_DIV2W here? */
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#undef SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#define THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#define RC4_INDEX
+#endif
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#undef BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#undef DES_PTR
+#endif
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#undef DES_RISC1
+#endif
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#define DES_UNROLL
+#endif
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )              /* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )       /* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )       /* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )          /* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )         /* HP-PA */
+  /* Unknown */
+#elif defined( __aux )          /* 68K */
+  /* Unknown */
+#elif defined( __dgux )         /* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )          /* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)        /* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
diff --git a/src/lib/libssl/man/Makefile b/src/lib/libssl/man/Makefile
new file mode 100644
index 0000000000..a9e097ef3e
--- /dev/null
+++ b/src/lib/libssl/man/Makefile
@@ -0,0 +1,898 @@
+# $OpenBSD: Makefile,v 1.1 2002/09/03 18:59:56 markus Exp $
+.include <bsd.own.mk>           # for NOMAN
+.ifndef NOMAN
+MANALL= \
+        BN_CTX_new.cat3 \
+        BN_CTX_start.cat3 \
+        BN_add.cat3 \
+        BN_add_word.cat3 \
+        BN_bn2bin.cat3 \
+        BN_cmp.cat3 \
+        BN_copy.cat3 \
+        BN_generate_prime.cat3 \
+        BN_mod_inverse.cat3 \
+        BN_mod_mul_montgomery.cat3 \
+        BN_mod_mul_reciprocal.cat3 \
+        BN_new.cat3 \
+        BN_num_bytes.cat3 \
+        BN_rand.cat3 \
+        BN_set_bit.cat3 \
+        BN_swap.cat3 \
+        BN_zero.cat3 \
+        BUF_MEM_new.cat3 \
+        BUF_MEM_new.cat3 \
+        CRYPTO_set_ex_data.cat3 \
+        CRYPTO_set_locking_callback.cat3 \
+        DH_generate_key.cat3 \
+        DH_generate_parameters.cat3 \
+        DH_get_ex_new_index.cat3 \
+        DH_new.cat3 \
+        DH_set_method.cat3 \
+        DH_size.cat3 \
+        DSA_SIG_new.cat3 \
+        DSA_do_sign.cat3 \
+        DSA_dup_DH.cat3 \
+        DSA_generate_key.cat3 \
+        DSA_generate_parameters.cat3 \
+        DSA_get_ex_new_index.cat3 \
+        DSA_new.cat3 \
+        DSA_set_method.cat3 \
+        DSA_sign.cat3 \
+        DSA_size.cat3 \
+        ERR_GET_LIB.cat3 \
+        ERR_clear_error.cat3 \
+        ERR_error_string.cat3 \
+        ERR_get_error.cat3 \
+        ERR_load_crypto_strings.cat3 \
+        ERR_load_strings.cat3 \
+        ERR_print_errors.cat3 \
+        ERR_put_error.cat3 \
+        ERR_remove_state.cat3 \
+        EVP_BytesToKey.cat3 \
+        EVP_DigestInit.cat3 \
+        EVP_EncryptInit.cat3 \
+        EVP_OpenInit.cat3 \
+        EVP_SealInit.cat3 \
+        EVP_SignInit.cat3 \
+        EVP_VerifyInit.cat3 \
+        HMAC.cat3 \
+        MD5.cat3 \
+        MDC2.cat3 \
+        OPENSSL_VERSION_NUMBER.cat3 \
+        OpenSSL_add_all_algorithms.cat3 \
+        RAND_add.cat3 \
+        RAND_bytes.cat3 \
+        RAND_cleanup.cat3 \
+        RAND_egd.cat3 \
+        RAND_load_file.cat3 \
+        RAND_set_rand_method.cat3 \
+        RC4.cat3 \
+        RIPEMD160.cat3 \
+        RSA_blinding_on.cat3 \
+        RSA_check_key.cat3 \
+        RSA_generate_key.cat3 \
+        RSA_get_ex_new_index.cat3 \
+        RSA_new.cat3 \
+        RSA_padding_add_PKCS1_type_1.cat3 \
+        RSA_print.cat3 \
+        RSA_private_encrypt.cat3 \
+        RSA_public_encrypt.cat3 \
+        RSA_set_method.cat3 \
+        RSA_sign.cat3 \
+        RSA_sign_ASN1_OCTET_STRING.cat3 \
+        RSA_size.cat3 \
+        SHA1.cat3 \
+        SSL_CIPHER_get_name.cat3 \
+        SSL_COMP_add_compression_method.cat3 \
+        SSL_CTX_add_extra_chain_cert.cat3 \
+        SSL_CTX_add_session.cat3 \
+        SSL_CTX_ctrl.cat3 \
+        SSL_CTX_flush_sessions.cat3 \
+        SSL_CTX_free.cat3 \
+        SSL_CTX_get_ex_new_index.cat3 \
+        SSL_CTX_get_verify_mode.cat3 \
+        SSL_CTX_load_verify_locations.cat3 \
+        SSL_CTX_new.cat3 \
+        SSL_CTX_sess_number.cat3 \
+        SSL_CTX_sess_set_cache_size.cat3 \
+        SSL_CTX_sess_set_get_cb.cat3 \
+        SSL_CTX_sessions.cat3 \
+        SSL_CTX_set_cert_store.cat3 \
+        SSL_CTX_set_cert_verify_callback.cat3 \
+        SSL_CTX_set_cipher_list.cat3 \
+        SSL_CTX_set_client_CA_list.cat3 \
+        SSL_CTX_set_client_cert_cb.cat3 \
+        SSL_CTX_set_default_passwd_cb.cat3 \
+        SSL_CTX_set_generate_session_id.cat3 \
+        SSL_CTX_set_info_callback.cat3 \
+        SSL_CTX_set_max_cert_list.cat3 \
+        SSL_CTX_set_mode.cat3 \
+        SSL_CTX_set_msg_callback.cat3 \
+        SSL_CTX_set_options.cat3 \
+        SSL_CTX_set_quiet_shutdown.cat3 \
+        SSL_CTX_set_session_cache_mode.cat3 \
+        SSL_CTX_set_session_id_context.cat3 \
+        SSL_CTX_set_ssl_version.cat3 \
+        SSL_CTX_set_timeout.cat3 \
+        SSL_CTX_set_tmp_dh_callback.cat3 \
+        SSL_CTX_set_tmp_rsa_callback.cat3 \
+        SSL_CTX_set_verify.cat3 \
+        SSL_CTX_use_certificate.cat3 \
+        SSL_SESSION_free.cat3 \
+        SSL_SESSION_get_ex_new_index.cat3 \
+        SSL_SESSION_get_time.cat3 \
+        SSL_accept.cat3 \
+        SSL_alert_type_string.cat3 \
+        SSL_clear.cat3 \
+        SSL_connect.cat3 \
+        SSL_free.cat3 \
+        SSL_get_SSL_CTX.cat3 \
+        SSL_get_ciphers.cat3 \
+        SSL_get_client_CA_list.cat3 \
+        SSL_get_current_cipher.cat3 \
+        SSL_get_default_timeout.cat3 \
+        SSL_get_error.cat3 \
+        SSL_get_ex_data_X509_STORE_CTX_idx.cat3 \
+        SSL_get_ex_new_index.cat3 \
+        SSL_get_fd.cat3 \
+        SSL_get_peer_cert_chain.cat3 \
+        SSL_get_peer_certificate.cat3 \
+        SSL_get_rbio.cat3 \
+        SSL_get_session.cat3 \
+        SSL_get_verify_result.cat3 \
+        SSL_get_version.cat3 \
+        SSL_library_init.cat3 \
+        SSL_load_client_CA_file.cat3 \
+        SSL_new.cat3 \
+        SSL_pending.cat3 \
+        SSL_read.cat3 \
+        SSL_rstate_string.cat3 \
+        SSL_session_reused.cat3 \
+        SSL_set_bio.cat3 \
+        SSL_set_connect_state.cat3 \
+        SSL_set_fd.cat3 \
+        SSL_set_session.cat3 \
+        SSL_set_shutdown.cat3 \
+        SSL_set_verify_result.cat3 \
+        SSL_shutdown.cat3 \
+        SSL_state_string.cat3 \
+        SSL_want.cat3 \
+        SSL_write.cat3 \
+        blowfish.cat3 \
+        bn.cat3 \
+        bn_internal.cat3 \
+        crypto.cat3 \
+        d2i_DHparams.cat3 \
+        d2i_RSAPublicKey.cat3 \
+        d2i_SSL_SESSION.cat3 \
+        des_modes.cat7 \
+        des_random_key.cat3 \
+        dh.cat3 \
+        dsa.cat3 \
+        lh_stats.cat3 \
+        lhash.cat3 \
+        openssl.cat1 \
+        rsa.cat3 \
+        ssl.cat3
+.if MANPS
+PSALL=  ${MANALL:S/.cat1/.ps1/g:S/.cat2/.ps2/g:S/.cat3/.ps3/g:S/.cat4/.ps4/g:S/.cat5/.ps5/g:S/.cat6/.ps6/g:S/.cat7/.ps7/g:S/.cat8/.ps8/g:S/.cat9/.ps9/g}
+.endif
+# these are is a real problem, since they re-document functions described in
+# other pages.
+#
+# err.pod -> ERR_get_error.pod
+# ERR_peek_error ERR_get_error_line
+# ERR_peek_error_line ERR_get_error_line_data ERR_peek_error_line_data
+# ERR_GET_LIB ERR_GET_FUNC ERR_GET_REASON ERR_clear_error ERR_error_string
+# ERR_lib_error_string ERR_func_error_string ERR_reason_error_string
+# ERR_print_errors ERR_print_errors_fp ERR_load_crypto_strings ERR_free_strings
+# ERR_remove_state ERR_put_error ERR_add_error_data ERR_load_strings ERR_PACK
+# ERR_get_next_error_library
+#
+# rand.pod -> RAND_bytes.pod
+# RAND_pseudo_bytes RAND_seed RAND_add RAND_status RAND_event
+# RAND_screen RAND_load_file RAND_write_file RAND_file_name RAND_egd
+# RAND_set_rand_method RAND_get_rand_method RAND_SSLeay RAND_cleanup
+# buffer.pod -> BUF_MEM_new.pod
+# BUF_MEM_free BUF_MEM_grow BUF_strdup
+BUF_MEM_new.cat3: buffer.pod
+        ( cp ${.ALLSRC} BUF_MEM_new.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          BUF_MEM_new.pm ) | nroff -Tascii -man > ${.TARGET}
+.if MANPS
+BUF_MEM_new.ps3: buffer.pod
+        ( cp ${.ALLSRC} BUF_MEM_new.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          BUF_MEM_new.pm ) | nroff -Tps -man > ${.TARGET}
+.endif
+# rc4.pod -> RC4.pod
+# RC4_set_key
+RC4.cat3: rc4.pod
+        ( cp ${.ALLSRC} RC4.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          RC4.pm ) | nroff -Tascii -man > ${.TARGET}
+.if MANPS
+RC4.ps3: rc4.pod
+        ( cp ${.ALLSRC} RC4.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          RC4.pm ) | nroff -Tps -man > ${.TARGET}
+.endif
+# threads.pod -> CRYPTO_set_locking_callback.pod
+# CRYPTO_set_id_callback CRYPTO_num_locks
+CRYPTO_set_locking_callback.cat3: threads.pod
+        ( cp ${.ALLSRC} CRYPTO_set_locking_callback.pm && \
+          pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          CRYPTO_set_locking_callback.pm ) | nroff -Tascii -man > ${.TARGET}
+.if MANPS
+CRYPTO_set_locking_callback.ps3: threads.pod
+        ( cp ${.ALLSRC} CRYPTO_set_locking_callback.pm && \
+          pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          CRYPTO_set_locking_callback.pm ) | nroff -Tps -man > ${.TARGET}
+.endif
+# ripemd.pod -> RIPEMD160.pod
+# RIPEMD160_Init RIPEMD160_Update RIPEMD160_Final
+RIPEMD160.cat3: ripemd.pod
+        ( cp ${.ALLSRC} RIPEMD160.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          RIPEMD160.pm ) | nroff -Tascii -man > ${.TARGET}
+.if MANPS
+RIPEMD160.ps3: ripemd.pod
+        ( cp ${.ALLSRC} RIPEMD160.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          RIPEMD160.pm ) | nroff -Tps -man > ${.TARGET}
+.endif
+# sha.pod -> SHA1.pod
+SHA1.cat3: sha.pod
+        ( cp ${.ALLSRC} SHA1.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          SHA1.pm ) | nroff -Tascii -man > ${.TARGET}
+.if MANPS
+SHA1.ps3: sha.pod
+        ( cp ${.ALLSRC} SHA1.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          SHA1.pm ) | nroff -Tps -man > ${.TARGET}
+.endif
+# md5.pod -> MD5.pod
+MD5.cat3: md5.pod
+        ( cp ${.ALLSRC} MD5.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          MD5.pm ) | nroff -Tascii -man > ${.TARGET}
+.if MANPS
+MD5.ps3: md5.pod
+        ( cp ${.ALLSRC} MD5.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          MD5.pm ) | nroff -Tps -man > ${.TARGET}
+.endif
+# mdc2.pod -> MDC2.pod
+MDC2.cat3: mdc2.pod
+        ( cp ${.ALLSRC} MDC2.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          MDC2.pm ) | nroff -Tascii -man > ${.TARGET}
+.if MANPS
+MDC2.ps3: mdc2.pod
+        ( cp ${.ALLSRC} MDC2.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          MDC2.pm ) | nroff -Tps -man > ${.TARGET}
+.endif
+# hmac.pod -> HMAC.pod
+HMAC.cat3: hmac.pod
+        ( cp ${.ALLSRC} HMAC.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          HMAC.pm ) | nroff -Tascii -man > ${.TARGET}
+.if MANPS
+HMAC.ps3: hmac.pod
+        ( cp ${.ALLSRC} HMAC.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          HMAC.pm ) | nroff -Tps -man > ${.TARGET}
+.endif
+# des.pod -> des_random_key, des_set_key, des_key_sched, des_set_key_checked,
+# des_set_key_unchecked, des_set_odd_parity, des_is_weak_key, des_ecb_encrypt,
+# des_ecb2_encrypt, des_ecb3_encrypt, des_ncbc_encrypt, des_cfb_encrypt,
+# des_ofb_encrypt, des_pcbc_encrypt, des_cfb64_encrypt, des_ofb64_encrypt,
+# des_xcbc_encrypt, des_ede2_cbc_encrypt, des_ede2_cfb64_encrypt,
+# des_ede2_ofb64_encrypt, des_ede3_cbc_encrypt, des_ede3_cbcm_encrypt,
+# des_ede3_cfb64_encrypt, des_ede3_ofb64_encrypt, des_read_password,
+# des_read_2passwords, des_read_pw_string, des_cbc_cksum, des_quad_cksum,
+# des_string_to_key, des_string_to_2keys, des_fcrypt, des_crypt,
+# des_enc_read, des_enc_write
+des_random_key.cat3: des.pod
+        ( cp ${.ALLSRC} des_random_key.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          des_random_key.pm ) | nroff -Tascii -man > ${.TARGET}
+.if MANPS
+des_random_key.ps3: des.pod
+        ( cp ${.ALLSRC} des_random_key.pm && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          des_random_key.pm ) | nroff -Tps -man > ${.TARGET}
+.endif
+MLINKS+=\
+        BN_CTX_new.3 BN_CTX_free.3 \
+        BN_CTX_new.3 BN_CTX_init.3 \
+        BN_CTX_start.3 BN_CTX_end.3 \
+        BN_CTX_start.3 BN_CTX_get.3 \
+        BN_add.3 BN_div.3 \
+        BN_add.3 BN_exp.3 \
+        BN_add.3 BN_gcd.3 \
+        BN_add.3 BN_mod.3 \
+        BN_add.3 BN_mod_exp.3 \
+        BN_add.3 BN_mod_mul.3 \
+        BN_add.3 BN_mul.3 \
+        BN_add.3 BN_sqr.3 \
+        BN_add.3 BN_sub.3 \
+        BN_add_word.3 BN_div_word.3 \
+        BN_add_word.3 BN_mod_word.3 \
+        BN_add_word.3 BN_mul_word.3 \
+        BN_add_word.3 BN_sub_word.3 \
+        BN_bn2bin.3 BN_bin2bn.3 \
+        BN_bn2bin.3 BN_bn2dec.3 \
+        BN_bn2bin.3 BN_bn2hex.3 \
+        BN_bn2bin.3 BN_bn2mpi.3 \
+        BN_bn2bin.3 BN_dec2bn.3 \
+        BN_bn2bin.3 BN_hex2bn.3 \
+        BN_bn2bin.3 BN_mpi2bn.3 \
+        BN_bn2bin.3 BN_print.3 \
+        BN_bn2bin.3 BN_print_fp.3 \
+        BN_cmp.3 BN_is_odd.3 \
+        BN_cmp.3 BN_is_one.3 \
+        BN_cmp.3 BN_is_word.3 \
+        BN_cmp.3 BN_is_zero.3 \
+        BN_cmp.3 BN_ucmp.3 \
+        BN_copy.3 BN_dup.3 \
+        BN_generate_prime.3 BN_is_prime.3 \
+        BN_generate_prime.3 BN_is_prime_fasttest.3 \
+        BN_mod_mul_montgomery.3 BN_MONT_CTX_copy.3 \
+        BN_mod_mul_montgomery.3 BN_MONT_CTX_free.3 \
+        BN_mod_mul_montgomery.3 BN_MONT_CTX_init.3 \
+        BN_mod_mul_montgomery.3 BN_MONT_CTX_new.3 \
+        BN_mod_mul_montgomery.3 BN_MONT_CTX_set.3 \
+        BN_mod_mul_montgomery.3 BN_from_montgomery.3 \
+        BN_mod_mul_montgomery.3 BN_to_montgomery.3 \
+        BN_mod_mul_reciprocal.3 BN_RECP_CTX_free.3 \
+        BN_mod_mul_reciprocal.3 BN_RECP_CTX_init.3 \
+        BN_mod_mul_reciprocal.3 BN_RECP_CTX_new.3 \
+        BN_mod_mul_reciprocal.3 BN_RECP_CTX_set.3 \
+        BN_mod_mul_reciprocal.3 BN_div_recp.3 \
+        BN_new.3 BN_clear.3 \
+        BN_new.3 BN_clear_free.3 \
+        BN_new.3 BN_free.3 \
+        BN_new.3 BN_init.3 \
+        BN_num_bytes.3 BN_num_bits.3 \
+        BN_num_bytes.3 BN_num_bits_word.3 \
+        BN_rand.3 BN_pseudo_rand.3 \
+        BN_rand.3 BN_rand_range.3 \
+        BN_set_bit.3 BN_clear_bit.3 \
+        BN_set_bit.3 BN_is_bit_set.3 \
+        BN_set_bit.3 BN_lshift.3 \
+        BN_set_bit.3 BN_lshift1.3 \
+        BN_set_bit.3 BN_mask_bits.3 \
+        BN_set_bit.3 BN_rshift.3 \
+        BN_set_bit.3 BN_rshift1.3 \
+        BN_zero.3 BN_get_word.3 \
+        BN_zero.3 BN_one.3 \
+        BN_zero.3 BN_set_word.3 \
+        BN_zero.3 BN_value_one.3 \
+        BUF_MEM_new.3 BUF_MEM_free.3 \
+        BUF_MEM_new.3 BUF_MEM_grow.3 \
+        BUF_MEM_new.3 BUF_strdup.3 \
+        CRYPTO_set_ex_data.3 CRYPTO_get_ex_data.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_add.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_add_lock.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_destroy_dynlockid.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_get_new_dynlockid.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_lock.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_num_locks.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_r_lock.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_r_unlock.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_set_dynlock_create_callback.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_set_dynlock_destroy_callback.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_set_dynlock_lock_callback.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_set_id_callback.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_w_lock.3 \
+        CRYPTO_set_locking_callback.3 CRYPTO_w_unlock.3 \
+        DH_generate_key.3 DH_compute_key.3 \
+        DH_generate_parameters.3 DH_check.3 \
+        DH_get_ex_new_index.3 DH_get_ex_data.3 \
+        DH_get_ex_new_index.3 DH_set_ex_data.3 \
+        DH_new.3 DH_free.3 \
+        DH_set_method.3 DH_OpenSSL.3 \
+        DH_set_method.3 DH_get_default_method.3 \
+        DH_set_method.3 DH_get_default_openssl_method.3 \
+        DH_set_method.3 DH_new_method.3 \
+        DH_set_method.3 DH_set_default_method.3 \
+        DH_set_method.3 DH_set_default_openssl_method.3 \
+        DSA_new.3 DSA_free.3 \
+        DSA_set_method.3 DSA_OpenSSL.3 \
+        DSA_set_method.3 DSA_get_default_method.3 \
+        DSA_set_method.3 DSA_get_default_openssl_method.3 \
+        DSA_set_method.3 DSA_new_method.3 \
+        DSA_set_method.3 DSA_set_default_method.3 \
+        DSA_set_method.3 DSA_set_default_openssl_method.3 \
+        DSA_sign.3 DSA_sign_setup.3 \
+        DSA_sign.3 DSA_verify.3 \
+        ERR_GET_LIB.3 ERR_GET_FUNC.3 \
+        ERR_GET_LIB.3 ERR_GET_REASON.3 \
+        ERR_error_string.3 ERR_error_string_n.3 \
+        ERR_error_string.3 ERR_func_error_string.3 \
+        ERR_error_string.3 ERR_lib_error_string.3 \
+        ERR_error_string.3 ERR_reason_error_string.3 \
+        ERR_get_error.3 ERR_get_error_line.3 \
+        ERR_get_error.3 ERR_get_error_line_data.3 \
+        ERR_get_error.3 ERR_peek_error.3 \
+        ERR_get_error.3 ERR_peek_error_line.3 \
+        ERR_get_error.3 ERR_peek_error_line_data.3 \
+        ERR_load_crypto_strings.3 ERR_free_strings.3 \
+        ERR_load_crypto_strings.3 SSL_load_error_strings.3 \
+        ERR_load_strings.3 ERR_PACK.3 \
+        ERR_load_strings.3 ERR_get_next_error_library.3 \
+        ERR_print_errors.3 ERR_print_errors_fp.3 \
+        ERR_put_error.3 ERR_add_error_data.3 \
+        EVP_DigestInit.3 EVP_DigestFinal.3 \
+        EVP_DigestInit.3 EVP_DigestUpdate.3 \
+        EVP_DigestInit.3 EVP_MD_CTX_block_size.3 \
+        EVP_DigestInit.3 EVP_MD_CTX_copy.3 \
+        EVP_DigestInit.3 EVP_MD_CTX_md.3 \
+        EVP_DigestInit.3 EVP_MD_CTX_size.3 \
+        EVP_DigestInit.3 EVP_MD_CTX_type.3 \
+        EVP_DigestInit.3 EVP_MD_block_size.3 \
+        EVP_DigestInit.3 EVP_MD_block_size.3 \
+        EVP_DigestInit.3 EVP_MD_pkey_type.3 \
+        EVP_DigestInit.3 EVP_MD_size.3 \
+        EVP_DigestInit.3 EVP_MD_size.3 \
+        EVP_DigestInit.3 EVP_MD_type.3 \
+        EVP_DigestInit.3 EVP_MD_type.3 \
+        EVP_DigestInit.3 EVP_dss.3 \
+        EVP_DigestInit.3 EVP_dss1.3 \
+        EVP_DigestInit.3 EVP_get_digestbyname.3 \
+        EVP_DigestInit.3 EVP_get_digestbyname.3 \
+        EVP_DigestInit.3 EVP_get_digestbynid.3 \
+        EVP_DigestInit.3 EVP_get_digestbynid.3 \
+        EVP_DigestInit.3 EVP_get_digestbyobj.3 \
+        EVP_DigestInit.3 EVP_md2.3 \
+        EVP_DigestInit.3 EVP_md5.3 \
+        EVP_DigestInit.3 EVP_md_null.3 \
+        EVP_DigestInit.3 EVP_mdc2.3 \
+        EVP_DigestInit.3 EVP_ripemd160.3 \
+        EVP_DigestInit.3 EVP_sha.3 \
+        EVP_DigestInit.3 EVP_sha1.3 \
+        EVP_DigestInit.3 OBJ_nid2sn.3 \
+        EVP_DigestInit.3 OBJ_obj2nid.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_CTX_block_size.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_CTX_cipher.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_CTX_cipher.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_CTX_cleanup.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_CTX_ctrl.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_CTX_iv_length.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_CTX_key_length.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_CTX_nid.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_CTX_set_key_length.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_CTX_type.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_asn1_to_param.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_block_size.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_iv_length.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_key_length.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_nid.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_param_to_asn1.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_type.3 \
+        EVP_EncryptInit.3 EVP_CIPHER_type.3 \
+        EVP_EncryptInit.3 EVP_CipherFinal.3 \
+        EVP_EncryptInit.3 EVP_CipherInit.3 \
+        EVP_EncryptInit.3 EVP_CipherUpdate.3 \
+        EVP_EncryptInit.3 EVP_DecryptFinal.3 \
+        EVP_EncryptInit.3 EVP_DecryptInit.3 \
+        EVP_EncryptInit.3 EVP_DecryptUpdate.3 \
+        EVP_EncryptInit.3 EVP_EncryptFinal.3 \
+        EVP_EncryptInit.3 EVP_EncryptUpdate.3 \
+        EVP_EncryptInit.3 EVP_get_cipherbyname.3 \
+        EVP_EncryptInit.3 EVP_get_cipherbyname.3 \
+        EVP_EncryptInit.3 EVP_get_cipherbynid.3 \
+        EVP_EncryptInit.3 EVP_get_cipherbynid.3 \
+        EVP_EncryptInit.3 EVP_get_cipherbyobj.3 \
+        EVP_EncryptInit.3 OBJ_nid2sn.3 \
+        EVP_EncryptInit.3 OBJ_obj2nid.3 \
+        EVP_OpenInit.3 EVP_OpenFinal.3 \
+        EVP_OpenInit.3 EVP_OpenUpdate.3 \
+        EVP_SealInit.3 EVP_SealFinal.3 \
+        EVP_SealInit.3 EVP_SealUpdate.3 \
+        EVP_SignInit.3 EVP_PKEY_size.3 \
+        EVP_SignInit.3 EVP_SignFinal.3 \
+        EVP_SignInit.3 EVP_SignUpdate.3 \
+        EVP_VerifyInit.3 EVP_VerifyFinal.3 \
+        EVP_VerifyInit.3 EVP_VerifyUpdate.3 \
+        HMAC.3 HMAC_Final.3 \
+        HMAC.3 HMAC_Init.3 \
+        HMAC.3 HMAC_Update.3 \
+        HMAC.3 HMAC_cleanup.3 \
+        MD5.3 MD2.3 \
+        MD5.3 MD2_Final.3 \
+        MD5.3 MD2_Init.3 \
+        MD5.3 MD2_Update.3 \
+        MD5.3 MD4.3 \
+        MD5.3 MD4_Final.3 \
+        MD5.3 MD4_Init.3 \
+        MD5.3 MD4_Update.3 \
+        MD5.3 MD5_Final.3 \
+        MD5.3 MD5_Init.3 \
+        MD5.3 MD5_Update.3 \
+        MDC2.3 MDC2_Final.3 \
+        MDC2.3 MDC2_Init.3 \
+        MDC2.3 MDC2_Update.3 \
+        OPENSSL_VERSION_NUMBER.3 SSLeay.3 \
+        OPENSSL_VERSION_NUMBER.3 SSLeay_version.3 \
+        OpenSSL_add_all_algorithms.3 EVP_cleanup.3 \
+        OpenSSL_add_all_algorithms.3 OpenSSL_add_all_ciphers.3 \
+        OpenSSL_add_all_algorithms.3 OpenSSL_add_all_digests.3 \
+        RAND_add.3 RAND_event.3 \
+        RAND_add.3 RAND_screen.3 \
+        RAND_add.3 RAND_seed.3 \
+        RAND_add.3 RAND_status.3 \
+        RAND_bytes.3 RAND_pseudo_bytes.3 \
+        RAND_bytes.3 RAND_pseudo_bytes.3 \
+        RAND_egd.3 RAND_egd_bytes.3 \
+        RAND_load_file.3 RAND_file_name.3 \
+        RAND_load_file.3 RAND_file_name.3 \
+        RAND_load_file.3 RAND_write_file.3 \
+        RAND_load_file.3 RAND_write_file.3 \
+        RAND_set_rand_method.3 RAND_SSLeay.3 \
+        RAND_set_rand_method.3 RAND_SSLeay.3 \
+        RAND_set_rand_method.3 RAND_get_rand_method.3 \
+        RAND_set_rand_method.3 RAND_get_rand_method.3 \
+        RC4.3 RC4_set_key.3 \
+        RIPEMD160.3 RIPEMD160_Final.3 \
+        RIPEMD160.3 RIPEMD160_Init.3 \
+        RIPEMD160.3 RIPEMD160_Update.3 \
+        RSA_blinding_on.3 RSA_blinding_off.3 \
+        RSA_get_ex_new_index.3 RSA_get_ex_data.3 \
+        RSA_get_ex_new_index.3 RSA_set_ex_data.3 \
+        RSA_new.3 RSA_free.3 \
+        RSA_padding_add_PKCS1_type_1.3 RSA_padding_add_PKCS1_OAEP.3 \
+        RSA_padding_add_PKCS1_type_1.3 RSA_padding_add_PKCS1_type_2.3 \
+        RSA_padding_add_PKCS1_type_1.3 RSA_padding_add_SSLv23.3 \
+        RSA_padding_add_PKCS1_type_1.3 RSA_padding_add_none.3 \
+        RSA_padding_add_PKCS1_type_1.3 RSA_padding_check_PKCS1_OAEP.3 \
+        RSA_padding_add_PKCS1_type_1.3 RSA_padding_check_PKCS1_type_1.3 \
+        RSA_padding_add_PKCS1_type_1.3 RSA_padding_check_PKCS1_type_2.3 \
+        RSA_padding_add_PKCS1_type_1.3 RSA_padding_check_SSLv23.3 \
+        RSA_padding_add_PKCS1_type_1.3 RSA_padding_check_none.3 \
+        RSA_print.3 DHparams_print.3 \
+        RSA_print.3 DHparams_print.3 \
+        RSA_print.3 DHparams_print_fp.3 \
+        RSA_print.3 DHparams_print_fp.3 \
+        RSA_print.3 DSA_print.3 \
+        RSA_print.3 DSA_print_fp.3 \
+        RSA_print.3 DSA_print_fp.3 \
+        RSA_print.3 DSAparams_print.3 \
+        RSA_print.3 DSAparams_print.3 \
+        RSA_print.3 DSAparams_print_fp.3 \
+        RSA_print.3 DSAparams_print_fp.3 \
+        RSA_print.3 RSA_print_fp.3 \
+        RSA_print.3 RSA_print_fp.3 \
+        RSA_private_encrypt.3 RSA_public_decrypt.3 \
+        RSA_public_encrypt.3 RSA_private_decrypt.3 \
+        RSA_set_method.3 RSA_PKCS1_RSAref.3 \
+        RSA_set_method.3 RSA_PKCS1_SSLeay.3 \
+        RSA_set_method.3 RSA_flags.3 \
+        RSA_set_method.3 RSA_get_default_method.3 \
+        RSA_set_method.3 RSA_get_default_openssl_method.3 \
+        RSA_set_method.3 RSA_get_method.3 \
+        RSA_set_method.3 RSA_new_method.3 \
+        RSA_set_method.3 RSA_null_method.3 \
+        RSA_set_method.3 RSA_set_default_method.3 \
+        RSA_set_method.3 RSA_set_default_openssl_method.3 \
+        RSA_sign.3 RSA_verify.3 \
+        RSA_sign_ASN1_OCTET_STRING.3 RSA_verify_ASN1_OCTET_STRING.3 \
+        SHA1.3 SHA1_Final.3 \
+        SHA1.3 SHA1_Init.3 \
+        SHA1.3 SHA1_Update.3 \
+        SSL_CIPHER_get_name.3 SSL_CIPHER_description.3 \
+        SSL_CIPHER_get_name.3 SSL_CIPHER_get_bits.3 \
+        SSL_CIPHER_get_name.3 SSL_CIPHER_get_version.3 \
+        SSL_CTX_add_session.3 SSL_CTX_remove_session.3 \
+        SSL_CTX_add_session.3 SSL_add_session.3 \
+        SSL_CTX_add_session.3 SSL_remove_session.3 \
+        SSL_CTX_ctrl.3 SSL_CTX_callback_ctrl.3 \
+        SSL_CTX_ctrl.3 SSL_callback_ctrl.3 \
+        SSL_CTX_ctrl.3 SSL_ctrl.3 \
+        SSL_CTX_flush_sessions.3 SSL_flush_sessions.3 \
+        SSL_CTX_get_ex_new_index.3 SSL_CTX_get_ex_data.3 \
+        SSL_CTX_get_ex_new_index.3 SSL_CTX_set_ex_data.3 \
+        SSL_CTX_get_verify_mode.3 SSL_CTX_get_verify_callback.3 \
+        SSL_CTX_get_verify_mode.3 SSL_CTX_get_verify_depth.3 \
+        SSL_CTX_get_verify_mode.3 SSL_get_verify_callback.3 \
+        SSL_CTX_get_verify_mode.3 SSL_get_verify_depth.3 \
+        SSL_CTX_get_verify_mode.3 SSL_get_verify_mode.3 \
+        SSL_CTX_sess_number.3 SSL_CTX_sess_accept.3 \
+        SSL_CTX_sess_number.3 SSL_CTX_sess_accept_good.3 \
+        SSL_CTX_sess_number.3 SSL_CTX_sess_accept_renegotiate.3 \
+        SSL_CTX_sess_number.3 SSL_CTX_sess_cache_full.3 \
+        SSL_CTX_sess_number.3 SSL_CTX_sess_cb_hits.3 \
+        SSL_CTX_sess_number.3 SSL_CTX_sess_connect.3 \
+        SSL_CTX_sess_number.3 SSL_CTX_sess_connect_good.3 \
+        SSL_CTX_sess_number.3 SSL_CTX_sess_connect_renegotiate.3 \
+        SSL_CTX_sess_number.3 SSL_CTX_sess_hits.3 \
+        SSL_CTX_sess_number.3 SSL_CTX_sess_misses.3 \
+        SSL_CTX_sess_number.3 SSL_CTX_sess_timeouts.3 \
+        SSL_CTX_sess_set_cache_size.3 SSL_CTX_sess_get_cache_size.3 \
+        SSL_CTX_sess_set_get_cb.3 SSL_CTX_sess_get_get_cb.3 \
+        SSL_CTX_sess_set_get_cb.3 SSL_CTX_sess_get_new_cb.3 \
+        SSL_CTX_sess_set_get_cb.3 SSL_CTX_sess_get_remove_cb.3 \
+        SSL_CTX_sess_set_get_cb.3 SSL_CTX_sess_set_new_cb.3 \
+        SSL_CTX_sess_set_get_cb.3 SSL_CTX_sess_set_remove.3 \
+        SSL_CTX_set_cert_store.3 SSL_CTX_get_cert_store.3 \
+        SSL_CTX_set_cipher_list.3 SSL_set_cipher_list.3 \
+        SSL_CTX_set_client_CA_list.3 SSL_CTX_add_client_CA.3 \
+        SSL_CTX_set_client_CA_list.3 SSL_add_client_CA.3 \
+        SSL_CTX_set_client_CA_list.3 SSL_set_client_CA_list.3 \
+        SSL_CTX_set_default_passwd_cb.3 \
+        SSL_CTX_set_default_passwd_cb_userdata.3 \
+        SSL_CTX_set_max_cert_list.3 SSL_CTX_get_max_cert_list.3 \
+        SSL_CTX_set_max_cert_list.3 SSL_get_max_cert_list.3 \
+        SSL_CTX_set_max_cert_list.3 SSL_set_max_cert_list.3 \
+        SSL_CTX_set_mode.3 SSL_CTX_get_mode.3 \
+        SSL_CTX_set_mode.3 SSL_get_mode.3 \
+        SSL_CTX_set_mode.3 SSL_set_mode.3 \
+        SSL_CTX_set_msg_callback.3 SSL_CTX_set_msg_callback_arg.3 \
+        SSL_CTX_set_msg_callback.3 SSL_set_msg_callback.3 \
+        SSL_CTX_set_msg_callback.3 SSL_set_msg_callback_arg.3 \
+        SSL_CTX_set_options.3 SSL_CTX_get_options.3 \
+        SSL_CTX_set_options.3 SSL_get_options.3 \
+        SSL_CTX_set_options.3 SSL_set_options.3 \
+        SSL_CTX_set_quiet_shutdown.3 SSL_CTX_get_quiet_shutdown.3 \
+        SSL_CTX_set_quiet_shutdown.3 SSL_get_quiet_shutdown.3 \
+        SSL_CTX_set_quiet_shutdown.3 SSL_set_quiet_shutdown.3 \
+        SSL_CTX_set_session_cache_mode.3 SSL_CTX_get_session_cache_mode.3 \
+        SSL_CTX_set_session_id_context.3 SSL_set_session_id_context.3 \
+        SSL_CTX_set_ssl_version.3 SSL_get_ssl_method.3 \
+        SSL_CTX_set_ssl_version.3 SSL_set_ssl_method.3 \
+        SSL_CTX_set_timeout.3 SSL_CTX_get_timeout.3 \
+        SSL_CTX_set_tmp_dh_callback.3 SSL_CTX_set_tmp_dh.3 \
+        SSL_CTX_set_tmp_dh_callback.3 SSL_set_tmp_dh.3 \
+        SSL_CTX_set_tmp_dh_callback.3 SSL_set_tmp_dh_callback.3 \
+        SSL_CTX_set_tmp_rsa_callback.3 SSL_CTX_need_tmp_rsa.3 \
+        SSL_CTX_set_tmp_rsa_callback.3 SSL_CTX_set_tmp_rsa.3 \
+        SSL_CTX_set_tmp_rsa_callback.3 SSL_need_tmp_rsa.3 \
+        SSL_CTX_set_tmp_rsa_callback.3 SSL_set_tmp_rsa.3 \
+        SSL_CTX_set_tmp_rsa_callback.3 SSL_set_tmp_rsa_callback.3 \
+        SSL_CTX_set_verify.3 SSL_CTX_set_verify_depth.3 \
+        SSL_CTX_set_verify.3 SSL_set_verify.3 \
+        SSL_CTX_set_verify.3 SSL_set_verify_depth.3 \
+        SSL_CTX_use_certificate.3 SSL_CTX_check_private_key.3 \
+        SSL_CTX_use_certificate.3 SSL_CTX_use_PrivateKey.3 \
+        SSL_CTX_use_certificate.3 SSL_CTX_use_PrivateKey_ASN1.3 \
+        SSL_CTX_use_certificate.3 SSL_CTX_use_PrivateKey_file.3 \
+        SSL_CTX_use_certificate.3 SSL_CTX_use_RSAPrivateKey.3 \
+        SSL_CTX_use_certificate.3 SSL_CTX_use_RSAPrivateKey_ASN1.3 \
+        SSL_CTX_use_certificate.3 SSL_CTX_use_RSAPrivateKey_file.3 \
+        SSL_CTX_use_certificate.3 SSL_CTX_use_certificate_ASN1.3 \
+        SSL_CTX_use_certificate.3 SSL_CTX_use_certificate_chain_file.3 \
+        SSL_CTX_use_certificate.3 SSL_CTX_use_certificate_file.3 \
+        SSL_CTX_use_certificate.3 SSL_check_private_key.3 \
+        SSL_CTX_use_certificate.3 SSL_use_PrivateKey.3 \
+        SSL_CTX_use_certificate.3 SSL_use_PrivateKey_ASN1.3 \
+        SSL_CTX_use_certificate.3 SSL_use_PrivateKey_file.3 \
+        SSL_CTX_use_certificate.3 SSL_use_RSAPrivateKey.3 \
+        SSL_CTX_use_certificate.3 SSL_use_RSAPrivateKey_ASN1.3 \
+        SSL_CTX_use_certificate.3 SSL_use_RSAPrivateKey_file.3 \
+        SSL_CTX_use_certificate.3 SSL_use_certificate.3 \
+        SSL_CTX_use_certificate.3 SSL_use_certificate_ASN1.3 \
+        SSL_CTX_use_certificate.3 SSL_use_certificate_file.3 \
+        SSL_SESSION_get_ex_new_index.3 SSL_SESSION_get_ex_data.3 \
+        SSL_SESSION_get_ex_new_index.3 SSL_SESSION_set_ex_data.3 \
+        SSL_SESSION_get_time.3 SSL_SESSION_get_timeout.3 \
+        SSL_SESSION_get_time.3 SSL_SESSION_set_time.3 \
+        SSL_SESSION_get_time.3 SSL_SESSION_set_timeout.3 \
+        SSL_SESSION_get_time.3 SSL_get_time.3 \
+        SSL_SESSION_get_time.3 SSL_get_timeout.3 \
+        SSL_SESSION_get_time.3 SSL_set_time.3 \
+        SSL_SESSION_get_time.3 SSL_set_timeout.3 \
+        SSL_alert_type_string.3 SSL_alert_desc_string.3 \
+        SSL_alert_type_string.3 SSL_alert_desc_string_long.3 \
+        SSL_alert_type_string.3 SSL_alert_type_string_long.3 \
+        SSL_get_ciphers.3 SSL_get_cipher_list.3 \
+        SSL_get_client_CA_list.3 SSL_CTX_get_client_CA_list.3 \
+        SSL_get_current_cipher.3 SSL_get_cipher.3 \
+        SSL_get_current_cipher.3 SSL_get_cipher_bits.3 \
+        SSL_get_current_cipher.3 SSL_get_cipher_name.3 \
+        SSL_get_current_cipher.3 SSL_get_cipher_version.3 \
+        SSL_get_ex_new_index.3 SSL_get_ex_data.3 \
+        SSL_get_ex_new_index.3 SSL_set_ex_data.3 \
+        SSL_get_fd.3 SSL_get_rfd.3 \
+        SSL_get_fd.3 SSL_get_wfd.3 \
+        SSL_get_rbio.3 SSL_get_wbio.3 \
+        SSL_get_session.3 SSL_get0_session.3 \
+        SSL_get_session.3 SSL_get1_session.3 \
+        SSL_library_init.3 OpenSSL_add_ssl_algorithms.3 \
+        SSL_library_init.3 SSLeay_add_ssl_algorithms.3 \
+        SSL_rstate_string.3 SSL_rstate_string_long.3 \
+        SSL_set_connect_state.3 SSL_set_accept_state.3 \
+        SSL_set_fd.3 SSL_set_rfd.3 \
+        SSL_set_fd.3 SSL_set_wfd.3 \
+        SSL_set_shutdown.3 SSL_get_shutdown.3 \
+        SSL_state_string.3 SSL_state_string_long.3 \
+        SSL_want.3 SSL_want_nothing.3 \
+        SSL_want.3 SSL_want_read.3 \
+        SSL_want.3 SSL_want_write.3 \
+        SSL_want.3 SSL_want_x509_lookup.3 \
+        blowfish.3 BF_cbc.3 \
+        blowfish.3 BF_cbc_encrypt.3 \
+        blowfish.3 BF_cfb64_encrypt.3 \
+        blowfish.3 BF_decrypt.3 \
+        blowfish.3 BF_ecb.3 \
+        blowfish.3 BF_ecb_encrypt.3 \
+        blowfish.3 BF_encrypt.3 \
+        blowfish.3 BF_ofb64_encrypt.3 \
+        blowfish.3 BF_options.3 \
+        blowfish.3 BF_set_key.3 \
+        bn_internal.3 bn_add_words.3 \
+        bn_internal.3 bn_check_top.3 \
+        bn_internal.3 bn_cmp_words.3 \
+        bn_internal.3 bn_div_words.3 \
+        bn_internal.3 bn_dump.3 \
+        bn_internal.3 bn_expand.3 \
+        bn_internal.3 bn_expand2.3 \
+        bn_internal.3 bn_fix_top.3 \
+        bn_internal.3 bn_mul_add_words.3 \
+        bn_internal.3 bn_mul_comba4.3 \
+        bn_internal.3 bn_mul_comba8.3 \
+        bn_internal.3 bn_mul_high.3 \
+        bn_internal.3 bn_mul_low_normal.3 \
+        bn_internal.3 bn_mul_low_recursive.3 \
+        bn_internal.3 bn_mul_normal.3 \
+        bn_internal.3 bn_mul_part_recursive.3 \
+        bn_internal.3 bn_mul_recursive.3 \
+        bn_internal.3 bn_mul_words.3 \
+        bn_internal.3 bn_print.3 \
+        bn_internal.3 bn_set_high.3 \
+        bn_internal.3 bn_set_low.3 \
+        bn_internal.3 bn_set_max.3 \
+        bn_internal.3 bn_sqr_comba4.3 \
+        bn_internal.3 bn_sqr_comba8.3 \
+        bn_internal.3 bn_sqr_normal.3 \
+        bn_internal.3 bn_sqr_recursive.3 \
+        bn_internal.3 bn_sqr_words.3 \
+        bn_internal.3 bn_sub_words.3 \
+        bn_internal.3 bn_wexpand.3 \
+        bn_internal.3 mul.3 \
+        bn_internal.3 mul_add.3 \
+        bn_internal.3 sqr.3 \
+        d2i_DHparams.3 i2d_DHparams.3 \
+        d2i_RSAPublicKey.3 d2i_Netscape_RSA.3 \
+        d2i_RSAPublicKey.3 d2i_RSAPrivateKey.3 \
+        d2i_RSAPublicKey.3 i2d_Netscape_RSA.3 \
+        d2i_RSAPublicKey.3 i2d_RSAPrivateKey.3 \
+        d2i_RSAPublicKey.3 i2d_RSAPublicKey.3 \
+        d2i_SSL_SESSION.3 i2d_SSL_SESSION.3 \
+        des_crypt.3 des_string_to_2keys.3 \
+        des_random_key.3 des_cbc_cksum.3 \
+        des_random_key.3 des_cfb64_encrypt.3 \
+        des_random_key.3 des_cfb_encrypt.3 \
+        des_random_key.3 des_crypt.3 \
+        des_random_key.3 des_ecb2_encrypt.3 \
+        des_random_key.3 des_ecb3_encrypt.3 \
+        des_random_key.3 des_ecb_encrypt.3 \
+        des_random_key.3 des_ede2_cbc_encrypt.3 \
+        des_random_key.3 des_ede2_cfb64_encrypt.3 \
+        des_random_key.3 des_ede2_ofb64_encrypt.3 \
+        des_random_key.3 des_ede3_cbc_encrypt.3 \
+        des_random_key.3 des_ede3_cbcm_encrypt.3 \
+        des_random_key.3 des_ede3_cfb64_encrypt.3 \
+        des_random_key.3 des_ede3_ofb64_encrypt.3 \
+        des_random_key.3 des_enc_read.3 \
+        des_random_key.3 des_enc_write.3 \
+        des_random_key.3 des_fcrypt.3 \
+        des_random_key.3 des_is_weak_key.3 \
+        des_random_key.3 des_key_sched.3 \
+        des_random_key.3 des_ncbc_encrypt.3 \
+        des_random_key.3 des_ofb64_encrypt.3 \
+        des_random_key.3 des_ofb_encrypt.3 \
+        des_random_key.3 des_pcbc_encrypt.3 \
+        des_random_key.3 des_quad_cksum.3 \
+        des_random_key.3 des_read_2passwords.3 \
+        des_random_key.3 des_read_password.3 \
+        des_random_key.3 des_read_pw_string.3 \
+        des_random_key.3 des_set_key.3 \
+        des_random_key.3 des_set_key_checked.3 \
+        des_random_key.3 des_set_key_unchecked.3 \
+        des_random_key.3 des_set_odd_parity.3 \
+        des_random_key.3 des_string_to_2keys.3 \
+        des_random_key.3 des_string_to_key.3 \
+        des_random_key.3 des_xcbc_encrypt.3 \
+        dsa.3 DSA_OpenSSL.3 \
+        dsa.3 DSA_SIG_free.3 \
+        dsa.3 DSA_do_verify.3 \
+        dsa.3 DSA_free.3 \
+        dsa.3 DSA_get_default_method.3 \
+        dsa.3 DSA_get_ex_data.3 \
+        dsa.3 DSA_new_method.3 \
+        dsa.3 DSA_set_default_method.3 \
+        dsa.3 DSA_set_ex_data.3 \
+        dsa.3 DSA_sign_setup.3 \
+        dsa.3 DSA_verify.3 \
+        dsa.3 d2i_DSAPrivateKey.3 \
+        dsa.3 d2i_DSAPublicKey.3 \
+        dsa.3 d2i_DSA_SIG.3 \
+        dsa.3 d2i_DSAparams.3 \
+        dsa.3 i2d_DSAPrivateKey.3 \
+        dsa.3 i2d_DSAPublicKey.3 \
+        dsa.3 i2d_DSA_SIG.3 \
+        dsa.3 i2d_DSAparams.3 \
+        lh_stats.3 lh_node_stats.3 \
+        lh_stats.3 lh_node_stats_bio.3 \
+        lh_stats.3 lh_node_usage_stats.3 \
+        lh_stats.3 lh_node_usage_stats_bio.3 \
+        lh_stats.3 lh_stats_bio.3 \
+        lhash.3 lh_delete.3 \
+        lhash.3 lh_doall.3 \
+        lhash.3 lh_doall_arg.3 \
+        lhash.3 lh_error.3 \
+        lhash.3 lh_free.3 \
+        lhash.3 lh_insert.3 \
+        lhash.3 lh_new.3 \
+        lhash.3 lh_retrieve.3
+.include <bsd.man.mk>
+.else
+maninstall:
+.endif
+# XXX .PATH order is critical because of non-unique filenames
+.PATH: ${.CURDIR}/../src/doc/crypto ${.CURDIR}/../src/doc/ssl ${.CURDIR}/../src/doc/apps
+.SUFFIXES: .pod
+.pod.cat3:
+        ( cd `dirname ${.ALLSRC}` && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          `basename ${.ALLSRC}` ) | nroff -Tascii -man > ${.TARGET}
+.pod.cat7:
+        ( cd `dirname ${.ALLSRC}` && pod2man --section=7 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          `basename ${.ALLSRC}` ) | nroff -Tascii -man > ${.TARGET}
+.pod.cat1:
+        ( cd `dirname ${.ALLSRC}` && pod2man --section=1 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          `basename ${.ALLSRC}` ) | nroff -Tascii -man > ${.TARGET}
+.pod.ps3:
+        ( cd `dirname ${.ALLSRC}` && pod2man --section=3 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          `basename ${.ALLSRC}` ) | nroff -Tps -man > ${.TARGET}
+.pod.ps7:
+        ( cd `dirname ${.ALLSRC}` && pod2man --section=7 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          `basename ${.ALLSRC}` ) | nroff -Tps -man > ${.TARGET}
+.pod.ps1:
+        ( cd `dirname ${.ALLSRC}` && pod2man --section=1 --official \
+          --center='OpenSSL' --release="OpenBSD `uname -r`" \
+          `basename ${.ALLSRC}` ) | nroff -Tps -man > ${.TARGET}
+.include <bsd.obj.mk>
+.include <bsd.subdir.mk>
+CLEANFILES+=\
+        BUF_MEM_new.pm \
+        CRYPTO_set_locking_callback.pm \
+        HMAC.pm \
+        MDC2.pm \
+        RC4.pm \
+        RIPEMD160.pm \
+        SHA1.pm \
+        des_random_key.pm \
+        MD5.pm \
+clean:
+        rm -f ${CLEANFILES}
diff --git a/src/lib/libssl/ssl/Makefile b/src/lib/libssl/ssl/Makefile
index 8f687b5cef..7282f43793 100644
--- a/src/lib/libssl/ssl/Makefile
+++ b/src/lib/libssl/ssl/Makefile
@@ -1,10 +1,10 @@
+# $OpenBSD: Makefile,v 1.15 2002/09/03 18:59:56 markus Exp $
 LIB=    ssl
 SSLEAYDIST= src
 LSSL_SRC= ${.CURDIR}/../${SSLEAYDIST}/ssl
-LCRYPTO_SRC= ${.CURDIR}/../${SSLEAYDIST}/crypto
 .if ${MACHINE_ARCH} == "i386"
 CFLAGS+= -DL_ENDIAN -DBN_ASM
@@ -26,8 +26,6 @@ CFLAGS+= -DB_ENDIAN
 CFLAGS+= -DOPENSSL_NO_IDEA -DTERMIOS -DANSI_SOURCE -DNO_ERR 
 CFLAGS+= -DOPENSSL_NO_RC5 -DOPENSSL_NO_KRB5 -DSO_DLFCN -DHAVE_DLFCN_H 
-CFLAGS+= -I${.CURDIR}/../${SSLEAYDIST}/include
-CFLAGS+= -I${.CURDIR}/../${SSLEAYDIST}/crypto
 CFLAGS+= -I${.CURDIR}/../${SSLEAYDIST}
 SRCS=   bio_ssl.c s2_clnt.c s3_both.c s3_srvr.c ssl_err2.c ssl_txt.c    \