3 files changed, 184 insertions, 0 deletions
diff --git a/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/AssemblyInfo.cs b/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/AssemblyInfo.cs
new file mode 100644
index 00000000..83e802dd
--- /dev/null
+++ b/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/AssemblyInfo.cs
@@ -0,0 +1,57 @@
+using System.Reflection;
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+[assembly: AssemblyVersion("1.0.*")]
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+//[assembly: AssemblyKeyFile("..\\..\\..\\Signing.sn")]
+[assembly: AssemblyKeyName("")]
diff --git a/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/TestComponentNET4.cs b/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/TestComponentNET4.cs
new file mode 100644
index 00000000..7aabd169
--- /dev/null
+++ b/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/TestComponentNET4.cs
@@ -0,0 +1,30 @@
+using System;
+using System.EnterpriseServices;
+using System.Runtime.InteropServices;
+[assembly: ApplicationActivation(ActivationOption.Library)]
+namespace TestApplication
+{
+    /// <summary>
+    /// TestComponent
+    /// </summary>
+    [ComVisible(true)]
+    [Transaction(TransactionOption.Required)]
+        [ObjectPooling(true, 5, 10)]
+    [Guid("146AB3A2-4472-4DB9-94D5-311536E799BD")]
+    public class TestComponent4 : ServicedComponent
+        {
+                public TestComponent4()
+                {
+                        //
+                        // TODO: Add constructor logic here
+                        //
+                }
+        [AutoComplete(true)]
+        public void TestMethod(string Name, string Address, int JobType, bool MakeFail)
+                {
+                }
+        }
+}
diff --git a/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/TestComponentNET4.csproj b/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/TestComponentNET4.csproj
new file mode 100644
index 00000000..60785894
--- /dev/null
+++ b/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/TestComponentNET4.csproj
@@ -0,0 +1,97 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003" DefaultTargets="Build">
+  <PropertyGroup>
+    <ProjectType>Local</ProjectType>
+    <ProductVersion>7.0.9466</ProductVersion>
+    <SchemaVersion>1.0</SchemaVersion>
+    <ProjectGuid>{EA2AFCCE-677D-433E-8517-4CFBBD3EBFAA}</ProjectGuid>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <IsWixTestProject>false</IsWixTestProject>
+    <ApplicationIcon />
+    <AssemblyKeyContainerName />
+    <AssemblyName>TestComponentNET4</AssemblyName>
+    <AssemblyOriginatorKeyFile />
+    <DefaultClientScript>JScript</DefaultClientScript>
+    <DefaultHTMLPageLayout>Grid</DefaultHTMLPageLayout>
+    <DefaultTargetSchema>IE50</DefaultTargetSchema>
+    <DelaySign>false</DelaySign>
+    <OutputType>Library</OutputType>
+    <RootNamespace>TestApplication</RootNamespace>
+    <StartupObject />
+    <FileUpgradeFlags>
+    </FileUpgradeFlags>
+    <UpgradeBackupLocation>
+    </UpgradeBackupLocation>
+    <OldToolsVersion>0.0</OldToolsVersion>
+    <TargetFrameworkVersion>v4.5.2</TargetFrameworkVersion>
+    <TargetFrameworkProfile />
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <OutputPath>bin\Debug\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile />
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <DocumentationFile />
+    <DebugSymbols>true</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <Optimize>false</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>full</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+    <Prefer32Bit>false</Prefer32Bit>
+    <PlatformTarget>AnyCPU</PlatformTarget>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <OutputPath>bin\Release\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile />
+    <DefineConstants>TRACE</DefineConstants>
+    <DocumentationFile />
+    <DebugSymbols>false</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <Optimize>true</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>none</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+    <Prefer32Bit>false</Prefer32Bit>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System">
+      <Name>System</Name>
+    </Reference>
+    <Reference Include="System.Data">
+      <Name>System.Data</Name>
+    </Reference>
+    <Reference Include="System.EnterpriseServices">
+      <Name>System.EnterpriseServices</Name>
+    </Reference>
+    <Reference Include="System.XML">
+      <Name>System.XML</Name>
+    </Reference>
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="AssemblyInfo.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="TestComponentNET4.cs">
+      <SubType>Code</SubType>
+    </Compile>
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+  <PropertyGroup>
+    <PreBuildEvent />
+    <PostBuildEvent>call "$(DevEnvDir)..\Tools\VsDevCmd.bat"
+tlbexp.exe $(TargetDir)$(TargetFileName)</PostBuildEvent>
+  </PropertyGroup>
+</Project>
+\ No newline at end of file

diff --git a/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/AssemblyInfo.cs b/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/AssemblyInfo.cs new file mode 100644 index 00000000..83e802dd --- /dev/null +++ b/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/AssemblyInfo.cs
@@ -0,0 +1,57 @@
	1	using System.Reflection;
	2
	3	//
	4	// General Information about an assembly is controlled through the following
	5	// set of attributes. Change these attribute values to modify the information
	6	// associated with an assembly.
	7	//
	8	[assembly: AssemblyTitle("")]
	9	[assembly: AssemblyDescription("")]
	10	[assembly: AssemblyConfiguration("")]
	11	[assembly: AssemblyCompany("")]
	12	[assembly: AssemblyProduct("")]
	13	[assembly: AssemblyCopyright("")]
	14	[assembly: AssemblyTrademark("")]
	15	[assembly: AssemblyCulture("")]
	16
	17	//
	18	// Version information for an assembly consists of the following four values:
	19	//
	20	// Major Version
	21	// Minor Version
	22	// Build Number
	23	// Revision
	24	//
	25	// You can specify all the values or you can default the Revision and Build Numbers
	26	// by using the '*' as shown below:
	27
	28	[assembly: AssemblyVersion("1.0.*")]
	29
	30	//
	31	// In order to sign your assembly you must specify a key to use. Refer to the
	32	// Microsoft .NET Framework documentation for more information on assembly signing.
	33	//
	34	// Use the attributes below to control which key is used for signing.
	35	//
	36	// Notes:
	37	// (*) If no key is specified, the assembly is not signed.
	38	// (*) KeyName refers to a key that has been installed in the Crypto Service
	39	// Provider (CSP) on your machine. KeyFile refers to a file which contains
	40	// a key.
	41	// (*) If the KeyFile and the KeyName values are both specified, the
	42	// following processing occurs:
	43	// (1) If the KeyName can be found in the CSP, that key is used.
	44	// (2) If the KeyName does not exist and the KeyFile does exist, the key
	45	// in the KeyFile is installed into the CSP and used.
	46	// (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
	47	// When specifying the KeyFile, the location of the KeyFile should be
	48	// relative to the project output directory which is
	49	// %Project Directory%\obj\<configuration>. For example, if your KeyFile is
	50	// located in the project directory, you would specify the AssemblyKeyFile
	51	// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
	52	// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
	53	// documentation for more information on this.
	54	//
	55	[assembly: AssemblyDelaySign(false)]
	56	//[assembly: AssemblyKeyFile("..\\..\\..\\Signing.sn")]
	57	[assembly: AssemblyKeyName("")]


diff --git a/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/TestComponentNET4.cs b/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/TestComponentNET4.cs new file mode 100644 index 00000000..7aabd169 --- /dev/null +++ b/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/TestComponentNET4.cs
@@ -0,0 +1,30 @@
	1	using System;
	2	using System.EnterpriseServices;
	3	using System.Runtime.InteropServices;
	4
	5	[assembly: ApplicationActivation(ActivationOption.Library)]
	6	namespace TestApplication
	7	{
	8	/// <summary>
	9	/// TestComponent
	10	/// </summary>
	11	[ComVisible(true)]
	12	[Transaction(TransactionOption.Required)]
	13	[ObjectPooling(true, 5, 10)]
	14	[Guid("146AB3A2-4472-4DB9-94D5-311536E799BD")]
	15	public class TestComponent4 : ServicedComponent
	16	{
	17	public TestComponent4()
	18	{
	19	//
	20	// TODO: Add constructor logic here
	21	//
	22	}
	23
	24	[AutoComplete(true)]
	25	public void TestMethod(string Name, string Address, int JobType, bool MakeFail)
	26	{
	27
	28	}
	29	}
	30	}


diff --git a/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/TestComponentNET4.csproj b/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/TestComponentNET4.csproj new file mode 100644 index 00000000..60785894 --- /dev/null +++ b/src/test/msi/TestData/ComPlusExtensionTests/Components/TestComponentNET4/TestComponentNET4.csproj
@@ -0,0 +1,97 @@
	1	<?xml version="1.0" encoding="utf-8"?>
	2	<Project ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003" DefaultTargets="Build">
	3	<PropertyGroup>
	4	<ProjectType>Local</ProjectType>
	5	<ProductVersion>7.0.9466</ProductVersion>
	6	<SchemaVersion>1.0</SchemaVersion>
	7	<ProjectGuid>{EA2AFCCE-677D-433E-8517-4CFBBD3EBFAA}</ProjectGuid>
	8	<Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
	9	<Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
	10	<IsWixTestProject>false</IsWixTestProject>
	11	<ApplicationIcon />
	12	<AssemblyKeyContainerName />
	13	<AssemblyName>TestComponentNET4</AssemblyName>
	14	<AssemblyOriginatorKeyFile />
	15	<DefaultClientScript>JScript</DefaultClientScript>
	16	<DefaultHTMLPageLayout>Grid</DefaultHTMLPageLayout>
	17	<DefaultTargetSchema>IE50</DefaultTargetSchema>
	18	<DelaySign>false</DelaySign>
	19	<OutputType>Library</OutputType>
	20	<RootNamespace>TestApplication</RootNamespace>
	21	<StartupObject />
	22	<FileUpgradeFlags>
	23	</FileUpgradeFlags>
	24	<UpgradeBackupLocation>
	25	</UpgradeBackupLocation>
	26	<OldToolsVersion>0.0</OldToolsVersion>
	27	<TargetFrameworkVersion>v4.5.2</TargetFrameworkVersion>
	28	<TargetFrameworkProfile />
	29	</PropertyGroup>
	30	<PropertyGroup Condition=" '$(Configuration)\|$(Platform)' == 'Debug\|AnyCPU' ">
	31	<OutputPath>bin\Debug\</OutputPath>
	32	<AllowUnsafeBlocks>false</AllowUnsafeBlocks>
	33	<BaseAddress>285212672</BaseAddress>
	34	<CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
	35	<ConfigurationOverrideFile />
	36	<DefineConstants>DEBUG;TRACE</DefineConstants>
	37	<DocumentationFile />
	38	<DebugSymbols>true</DebugSymbols>
	39	<FileAlignment>4096</FileAlignment>
	40	<Optimize>false</Optimize>
	41	<RegisterForComInterop>false</RegisterForComInterop>
	42	<RemoveIntegerChecks>false</RemoveIntegerChecks>
	43	<TreatWarningsAsErrors>false</TreatWarningsAsErrors>
	44	<WarningLevel>4</WarningLevel>
	45	<DebugType>full</DebugType>
	46	<ErrorReport>prompt</ErrorReport>
	47	<Prefer32Bit>false</Prefer32Bit>
	48	<PlatformTarget>AnyCPU</PlatformTarget>
	49	</PropertyGroup>
	50	<PropertyGroup Condition=" '$(Configuration)\|$(Platform)' == 'Release\|AnyCPU' ">
	51	<OutputPath>bin\Release\</OutputPath>
	52	<AllowUnsafeBlocks>false</AllowUnsafeBlocks>
	53	<BaseAddress>285212672</BaseAddress>
	54	<CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
	55	<ConfigurationOverrideFile />
	56	<DefineConstants>TRACE</DefineConstants>
	57	<DocumentationFile />
	58	<DebugSymbols>false</DebugSymbols>
	59	<FileAlignment>4096</FileAlignment>
	60	<Optimize>true</Optimize>
	61	<RegisterForComInterop>false</RegisterForComInterop>
	62	<RemoveIntegerChecks>false</RemoveIntegerChecks>
	63	<TreatWarningsAsErrors>false</TreatWarningsAsErrors>
	64	<WarningLevel>4</WarningLevel>
	65	<DebugType>none</DebugType>
	66	<ErrorReport>prompt</ErrorReport>
	67	<Prefer32Bit>false</Prefer32Bit>
	68	</PropertyGroup>
	69	<ItemGroup>
	70	<Reference Include="System">
	71	<Name>System</Name>
	72	</Reference>
	73	<Reference Include="System.Data">
	74	<Name>System.Data</Name>
	75	</Reference>
	76	<Reference Include="System.EnterpriseServices">
	77	<Name>System.EnterpriseServices</Name>
	78	</Reference>
	79	<Reference Include="System.XML">
	80	<Name>System.XML</Name>
	81	</Reference>
	82	</ItemGroup>
	83	<ItemGroup>
	84	<Compile Include="AssemblyInfo.cs">
	85	<SubType>Code</SubType>
	86	</Compile>
	87	<Compile Include="TestComponentNET4.cs">
	88	<SubType>Code</SubType>
	89	</Compile>
	90	</ItemGroup>
	91	<Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
	92	<PropertyGroup>
	93	<PreBuildEvent />
	94	<PostBuildEvent>call "$(DevEnvDir)..\Tools\VsDevCmd.bat"
	95	tlbexp.exe $(TargetDir)$(TargetFileName)</PostBuildEvent>
	96	</PropertyGroup>
	97	</Project> \ No newline at end of file